Thermal treatment on composite γ-zirconium phosphate-silica

The prepared amorphous γ-ZrP\SiO₂ composite had a complicated composition, since a part of γ-ZrP is converted to α-form during the exfoliation of it. The γ-ZrP\SiO₂ composite have specific surface area of 421 m²g^–1. The acidic P–OH groups of the lamellae species placed on the surface (it is ≈1.0 meq g^–1), do not destroy until the temperature of 1030 K. During the thermal treatment the total mass loss of 7.79% was found. This value corresponds to 0.42 mole of H₂O per molecule unit. The water loss process was found very slow, because of the placing of bilamellar species in the composite.     

若干具有[(PO4)2Mo5O15]簇骼的化合物的光谱研究

本文对所合成的具有 [(PO4 ) 2 Mo5O1 5]簇骼的 3种新颖的有机 磷钼酸盐簇合物(NH3CH2 CH2 NH3) 2 5[(PO4 ) (HPO4 )Mo5O1 5]·7 5H2 O (Ⅰ ) ,(H3NCH2 CH2 NH3) 3·[(PO4 ) 2 Mo5O1 5]·3H2 O (Ⅱ )和(H3NCH2 CH2 NH3) 2 ·[Cu(en) ][(PO4 ) 2 Mo5O1 5]·5H2 O (Ⅲ )用FTIR ,NIR Raman ,紫外 可见漫反射光谱 (UV VisDRS)和荧光光谱等研究手段 ,对其进行光谱研究 ,探讨其结构和性能的关系。在这些化合物中 ,化合物Ⅰ和Ⅱ具有孤立的 [(PO4 ) 2 Mo5O1 5]簇骼基元 ,而化合物Ⅲ的 [(PO4 ) 2 Mo5O1 5]簇骼基元是由 [Cuen]基团桥联成链 ;磷钼酸盐的特征振动频率和这些化合物的结构相关 ;UV VisDRS显示 ,在 2 0 0和 2 6 0nm左右有两个杂多化合物的特征吸收谱带 ;化合物的稳态荧光光谱中 ,观察到以 2 4 0nm激发 ,在大约 4 0 0nm附近出现的由金属氧簇Oμ→Mo跃迁激发所引起的较强的发射峰 ,在化合物 (Ⅲ )中 ,还观察到通过 [Cuen]的荷移跃迁的以 5 70nm激发所产生的 6 0 4nm的发射峰。     

Structures and syntheses of layered and framework amine-bearing uranyl phosphate and uranyl arsenates

Two hydrated uranyl arsenates and a uranyl phosphate were synthesized by hydrothermal methods in the presence of amine structure-directing agents and their structures determined: (N₂C₆H₁₄)[(UO₂)(AsO₄)]₂(H₂O)₃, DabcoUAs, {NH(C₂H₅)₃}[(UO₂)₂(AsO₄)(AsO₃OH)], TriethUAs, and (N₂C₄H₁₂)(UO₂)[(UO₂)(PO₄)]₄(H₂O)₂, PiperUP. Intensity data were collected at room temperature using MoKα X-radiation and a CCD-based area detector. The crystal structures were refined by full-matrix least-squares techniques on the basis of F² to agreement indices (DabcoUAs, TriethUAs, PiperUP) wR₂=5.6%, 8.3%, 7.2% for all data, and R₁=2.9%, 3.3%, 4.0%, calculated for 1777, 5822, 9119 unique observed reflections (|F_o|?4σ_F), respectively. DabcoUAs is monoclinic, space group C2/m, Z=2, a=18.581(1), b=7.1897(4), c=7.1909(4) Å, β=102.886(1)°, V=936.43(9) Å³, D_calc=3.50 g/cm³. TriethUAs is monoclinic, space group P2₁/n, Z=4, a=9.6359(4), b=18.4678(7), c=10.0708(4) Å, β=92.282(1)°, V=1790.7(1) Å³, D_calc=3.41 g/cm³. PiperUP is monoclinic, space group Pn, Z=2, a=9.3278(4), b=15.5529(7), c=9.6474(5) Å, β=93.266(1)°, V=1397.3(1) Å³, D_calc=4.41 g/cm³. The structure of DabcoUAs contains the autunite-type sheet formed by the sharing of vertices between uranyl square bipyramids and arsenate tetrahedra. The triethylenediammonium cations are located in the interlayer along with two H₂O groups and are disordered. Both TriethUAs and PiperUP contain sheets formed of uranyl pentagonal bipyramids and tetrahedra (arsenate and phosphate, respectively) with the uranophane sheet-anion topology. In TriethUAs, triethlyammonium cations are located in the interlayer. In PiperUP, the sheets are connected by a uranyl pentagonal bipyramid that shares corners with phosphate tetrahedra of adjacent sheets, resulting in a framework with piperazinium cations and H₂O groups in the cavities of the structure.     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.     

电流密度对钙磷沉积层组成和结构的影响(英文)

用X射线衍射、激光拉曼光谱以及等离子体原子发射光谱等技术研究了电化学沉积钙磷陶瓷过程中 ,电流密度对电沉积层组成和结构的影响 .实验表明阴极表面得到的沉积物是几种钙磷盐组成的混合物 ,且其成份随电流密度的改变而发生较大的变化 .在电解液温度为 75℃条件下 ,当控制电流密度较低时 ,沉积层主要由CaHPO4· 2H2 O (DCPD)和Ca8H2 (PO4) 6· 5H2 O (OCP)组成 ;随着电流密度的增加 ,阴极表面逐渐生成Ca3 (PO4) 2 ·nH2 O (TCP)和Ca10 (PO4) 6(OH) 2 (HAP) .当电流密度大于 5mA/cm2 时 ,电沉积层的主要成份为羟基磷灰石 (HAP) .     

Thermal decomposition of struvite

Struvite (NH₄MgPO₄·6H₂O) is a mineral often found in urinary tracts and kidneys. Thermal decomposition using slow low heating shows that the 'kidney' stone can be decomposed at temperatures below 40°C. At this temperature both ammonia and water are evolved. If more rapid heating is employed the decomposition occurs at around 80°C. The implication of this work rests with the use of low slow heat for the decomposition of the kidney stones. This revised version was published online in July 2006 with corrections to the Cover Date.     

胶束溶液中高氯酸二水(四胺)合钴(Ⅲ)配合物催化磷酸二酯水解的研究

本文合成了疏水性高氯酸二水（四胺）合钴（Ⅲ）配合物，研究了它与非离子表面活性剂Brij35形成的金属2胶束催化二（对硝基苯酚）磷酸二酯水解的动力学及其机理。结果表明此金属胶束对磷酸二酯水解的速率大约提高10^4倍，这主要是由于表面活性剂胶束的pH效应和浓聚效应所致，暗示着顺式二水类配合物形成的金属胶束是一个潜在的磷酸二酯水解剪切的催化剂。     

桑蚕丝素蛋白初始结构对其矿化作用的影响

以碱金属离子诱导桑蚕丝素蛋白溶液发生构象转变, 研究了蛋白质初始结构对其矿化作用的影响. FT-IR, XRD和SEM等测试结果显示, 未经任何处理的桑蚕丝素蛋白溶液矿化后形成片状复合物, 其无机相以二水磷酸氢钙(DCPD)为主; 而经过K^＋和Na^＋金属离子处理后, 桑蚕丝素溶液的结构由无规线团/螺旋构象向β-折叠发生转变, 矿化后成纤维状, 并相互结合呈现纳米级的三维多孔结构, 其无机相以热力学稳定的羟基磷灰石(HA)为主. 可以认为, 丝素蛋白结构转化为较伸展的β-折叠后, 使得更多的亲水基团暴露在外面, 在丝素蛋白分子不断凝聚成纤过程中, HA结晶快速生长并附着在这些微纤上, 最终形成纤维状的丝素蛋白/HA复合物. 该结果为阐明蛋白质的生物矿化过程及其调控机理提供了理论依据, 同时可以从矿化复合物的形成来反映这些微量元素可能对骨组织形成的影响, 为临床骨组织的修复提供一定的参考.     

Equations for calculation of the pH of buffer solutions containing sodium or potassium dihydrogen phosphate, sodium hydrogen phosphate, and sodium chloride at 25°C

Published thermodynamic data measured in aqueous mixtures of sodium or potassium dihydrogen phosphate with hydrogen phosphate and chloride at 25°C were used to test recently developed methods for calculation of the pH of phosphate buffer solutions. Equations for ionic activity coefficients are used in these methods. It is shown that all data used in the tests up to an ionic strength of about 0.5 mol-kg^-1 can be accurately predicted by the two methods recommended. In one of these methods, equations of the Hückel type are used for ionic activity coefficients and in the other equations of the Pitzer type. Several sets of phosphate buffer solutions are recommended,e.g., for calibrations of glass electrode cells. In the recommended sets, the pH of the buffer solutions can be calculated either by the Hückel or Pitzer method, and the pH predictions of these methods agree in most cases within 0.005 at least up to ionic strengths of about 0.2 mol-kg^-1. The pH values of the two primary pH standards endorsed by IUPAC based on aqueous mixtures of KH₂PO₄ and Na₂HPO₄,i.e., pH values of 6.865 and 7.413, can also be accurately predicted by the equations recommended in this study.