Host-guest interactions in aqueous media withp-tert.-butylcalix[4]arene bearing polyoxyethylene chains

The interactions ofp-tert.-butylcalix[4]arene bearing polyoxyethylene chains (C3) with pyrene (Py), 1-anilino-8-naphthalenesulfonate (ANS) andN-phenyl-naphthylamine (NPN) in aqueous solution were studied by absorption and fluorescence measurements. Absorption spectral changes and fluorescence enhancements reveal that C3, which has a hydrophobic cavity, can include organic molecules and ions in aqueous solution and form 11 host-guest complexes with ANS and NPN. C3 forms inclusion complexes with Py at different stoichiometries depending on the host: guest molar ratio. Binding constants of 2.2×10⁴, 2.0×10⁴ and 3.6×10⁵ dm³ mol^–1 were calculated for the C3Py, C3ANS and C3NPN complexes (11), respectively, based on the Benesi-Hildebrand equation.Author for correspondence.     

含规整聚环氧乙烷枝链的聚硅氧烷的合成及表征

以萘钾为引发剂，二甲基亚砜为溶剂制备了以烯丙基为末端基的聚环氧乙烷大单体，并利用末端双键的硅氢化反应合成了相对分子质量规整的聚环氧乙烷接枝聚硅氧烷的共聚物。产物经萃取精制后，用ＩＲ、￣１ＨＮＭＲ等方法进行了表征。     

Mesophases in mixtures of water and polyoxyethylene surfactant: Variations of repeat spacing with temperature and composition

Lamellar (L ) and hexagonal (H ₁) mesophases, formed in mixtures of water and polyethylene oxide (PEO) oleylethers (average EO-numbers 5 (a), 8.5 (b) and 14 (c)) and pure hexaoxyethylene dodecylether (d), were investigated with small-angle X-ray diffraction. Analysis of repeat spacings shows a deviation from linear one- and two-dimensional swelling ofL andH ₁, respectively, when a transition to a mesophase with a larger curvature of the interface is approached. With regard toL , in this respect similar behaviour is observed for a pure surfactant (d) and a surfactant with an EO-length distribution (b). It is proposed that, through the formation of aggregates of limited extent, water filled pores in the mesophases arise. This is confirmed by analysis of the intensity ratio of diffraction maxima of first and second order inL . Models for finite aggregates are introduced. These consist of (1) lamellae, infinite in one direction and with variable lengthL in a direction perpendicular to the first, with cylindrical edges and (2) cylinders with variable lengthL bounded by spherical caps. According to these models, under certain conditions, finite aggregates may be formed without an increase of the interfacial area per surfactant molecule. Applying the models to the regions where non-linear swelling is observed, reasonable values forL are found, which decrease progressively when the phase transition is approached.     

The Calculus of HLB Values of Polyoxyethylene Fatty Acid Esters from Quality Control Data

In this article, we obtained equations that permit us to calculate the hydrophilic-lipophilic balance (HLB) value of polyoxyethylene esters from quality control data of the raw materials (fatty acids and polyethylene glycol) and the finished product (surfactant). These data include the acid value of the fatty acid, the hydroxyl value of the polyethylene glycol, and the hydroxyl value of the surfactant. These calculations permit us, moreover, to know the mean molecular masses of fatty acids, of polyethylene glycol, of monoester and diester, and the proportion of polyoxyethylene monoester and polyoxyethylene diester.     

正相高效液相色谱法分析壬基环己醇聚氧乙烯醚中残留壬基环己醇

壬基环己醇聚氧乙烯醚(NCEO_n)是非环境友好型壬基酚聚氧乙烯醚(NPEO_n)潜在的升级换代产品。 本文采用正相高效液相色谱法(NP HPLC)测定产品中残存壬基环己醇(NC),用Weilbull法测定其中聚乙二醇(PEG)含量,用电喷雾电离质谱法评价聚氧乙烯(PEO)多分散指数(PDI),以此鉴定NCEO_n的品质。 为了建立快速分析NCEO_n产品中NC含量的方法,以满足跟踪检测的需求,本文筛选了反相HPLC和NP HPLC两类5种方法,并进行比较和初步条件优化,确定了用Inertsil NH₂色谱柱和示差折光检测器以及乙酸乙酯为洗脱液的NP HPLC法定量分析NC,方法的回收率为91.77%～107.6%,相对标准偏差为4.46%,最低检测限为9.8 μg/mL。 经测定,NCEO₇和NCEO₉产品中NC的残留量分别为0.158%和0.139%,PEG质量分数为7.1%和7.3%,PDI为85.0%和88.6%,证实NCEO_n产品具有NC残留量少、PEG含量低和产品PEO窄分布特征,具有在化妆品或个人洗护用品等民用产品中替代NPEO_n的潜能。     

LSmn系列表面化学性质与胶束化作用

通过表面张力的测定, 研究了十二烷基聚氧乙烯聚氧丙烯醚(LSmn)系列表面活性剂LS36、LS45、LS54在溶液表面吸附和形成胶束的热力学函数随温度的变化. 给出了它们在水溶液中的二组分相图.结果表明, LS36、LS45、LS54的表面活性都较高. 在25～50 ℃范围内, 临界胶束浓度(cmc)和平衡表面张力分别在4.44×10－6～17.3×10－6 mol•L－1和30.1～33.5 mN•m－1之间, 表面吸附和形成胶束的自由能分别在－40.0～－49.5 kJ•mol－1和－27.2～－33.1 kJ•mol－1之间.不论是在溶液表面吸附还是形成胶束均为熵驱动过程.其中LS36由于含具有亲水能力较强的聚氧乙烯基团(EO)成分较低, 因此不论其浊点还是其表面吸附和形成胶束的热力学函数均与LS45、LS54具有较大差异.     

壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂的合成 及其表面性质的研究

合成了系列壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂(GNPQA), 用核磁、红外和元素分析对它们的结构进行了表征, 考察了反应条件对转化率的影响, 并用表面张力法和稳态荧光探针法对GNPQA的表面性能及胶束聚集数(N)进行了研究. 结果表明, 较优的反应条件: 反应时间为12 h, 反应温度为70 ℃, 反应原料摩尔比为n(双聚壬基酚聚氧乙烯醚)∶n(三乙胺)∶n(环氧氯丙烷)＝1∶1∶1; GNPQA的临界胶束浓度(CMC)值较相应的单体壬基酚聚氧乙烯醚型季铵盐表面活性剂(NPQA)降低了1～2个数量级, 显示了较高的表面活性; 当GNPQA溶液浓度为5～9倍CMC时, N值随浓度增大而线性增大; 随着氧乙烯(EO)单元数的增长, GNPQA的CMC和N值均逐渐减小; 结合GNPQA的表面性能参数和N值的变化规律, 探讨了这类表面活性剂表面及胶束聚集体的结构形态.     

液相色谱-电喷雾质谱法分析脂肪醇聚氧乙烯醚硫酸钠

采用电喷雾质谱(ESI/MS)技术建立了脂肪醇聚氧乙烯醚硫酸钠(AES)的烷基碳链分布、乙氧基分布及平均EO数、平均相对分子质量的测定方法;采用液相色谱-电喷雾质谱(LC-ESI/MS)测定了AES中的游离十二烷基硫酸钠(SDS)的含量。将本方法应用于实际样品的测定,并与核磁共振法测得的平均EO数进行比较,二者的测定结果相当吻合,从而验证了本法的可靠性。     

蓖麻油聚氧乙烯醚水基润滑液摩擦学特性研究

本文以蓖麻油聚氧乙烯醚水基润滑液为研究对象,分别使用润滑膜厚度测量仪、微摩擦试验机和四球摩擦试验机对其成膜特性、摩擦磨损特性和抗磨极压特性进行了系统的研究,并用扫描电子显微镜和能量色散光谱仪对摩擦磨损机制进行了分析。结果表明：蓖麻油聚氧乙烯醚提高了纯水的成膜能力,能够在钢-铝摩擦副形成有效的润滑膜,起到良好的减摩抗磨效果。随着浓度的增大,对钢-铝摩擦副的减摩抗磨性能和四球摩擦试验的抗磨极压性能都得到了提高。     

绿色聚天冬氨酸复配缓蚀剂对A3碳钢的缓蚀抑雾作用

采用失重法和极化曲线法研究了聚天冬氨酸(PASP)和十二烷基酚聚氧乙烯醚(OP-10)复配对A3碳钢在6mol·L-1HCl腐蚀介质中的协同吸附行为及缓蚀抑雾作用.结果表明:复配缓蚀剂可有效抑制A3碳钢在HC1介质中的腐蚀,当PASP浓度为20g·L-1,缓蚀率可达94%,抑雾率83%;随着温度的升高,复配缓蚀剂的缓蚀性能下降.复合缓蚀剂在钢表面的吸附符合校正的Langmuir模型,吸附过程为放热、熵减的自发过程;复配体系属于阳极型缓蚀剂.