Large volume sample application by a simplified “closed” on-column injector in capillary gas chromatography

Summary A new simplified version of a closed on-column injector is introduced. Because of its design isobaric injection conditions do not have to be followed and a wide range of injection temperatures above the boiling point of the sample solvent can be chosen for on-column injections in capillary gas chromatography. Also, when following certain basic injection rules, injections of large sample volumes (20 l or more) give accurate and reproducible results without further problems.Presented at the 17th International Symposium on Chromatography, September 25–30, 1988, Vienna, Austria.     

Molecularly-imprinted polypyrrole-modified stainless steel frits for selective solid phase preconcentration of ochratoxin A

A molecularly-imprinted polymer (MIP) was prepared by electropolymerization of pyrrole (Py) onto a stainless steel frit, using ochratoxin A (OTA) as the template, in order to make a micro solid phase preconcentration (SPP) device. The OTA template was removed with 1% triethylamine (TEA) in methanol. Compared to non-imprinted polypyrrole (PPy), the molecularly-imprinted polypyrrole (MIPPy) enhanced the selective binding of OTA. The percentage recovery improved from 0 to 40% when the OTA sample solution was acidified with 1 M HCl (1% by volume). At a flow rate of 0.2 mL/min, maximum OTA binding was reached in 6 min after a total loading of 3.2 ng OTA. Final elution of the OTA was analyzed by high performance liquid chromatography (HPLC) with fluorescence detection, using 20:80 v/v acetonitrile–ammonia buffer (NH₄Cl/NH₃, 20 mM, pH 9.2) as the mobile phase. The MIPPy-SPP-HPLC results clearly demonstrated that the MIPPy-SPP device afforded selective preconcentration of OTA from red wine samples, at OTA concentration levels as low as 0.05 ppb, prior to HPLC analysis.     

Low temperature hermetic laser-assisted glass frit encapsulation of soda-lime glass substrates

Room temperature and low temperature (120 °C) laser-assisted glass frit bonding of soda-lime glass substrates are accomplished in this work. The locally laser melted bonding showed hermeticity with helium leak rate of <5×10⁻⁸ atm cm³ s⁻¹, maintaining its leak rate even after standard climatic cycle tests. Small size devices were bonded at room temperature while larger areas were sealed at the process temperature of 120 °C. The sealing parameters were optimized through response surface methodology that makes the process capable for further development regardless of device size.     

Hermetic Seal of Organic Light Emitting Diode with Glass Frit

The components of OLED encapsulation with hermetic sealing and a 1026-day lifetime were measured by PXI-1033. The optimal characteristics were obtained when the thickness of the TPBi layer was 20 nm. This OLED obtained a maximum luminance (Lmax) of 25,849 cd/m² at a current density of 1242 mA/cm², an external quantum efficiency (EQE) of 2.28%, a current efficiency (CE) of 7.20 cd/A, and a power efficiency (PE) of 5.28 lm/W. The efficiency was enhanced by Lmax 17.2%/EQE 0.89%/CE 42.1%/PE 41.9%. The CIE coordinates of 0.32, 0.54 were all green OLED elements with wavelengths of 532 nm. The shear strain and leakage test gave results of 16 kgf and 8.92 × 10⁻⁹ mbar/s, respectively. The reliability test showed that the standard of MIL-STD-883 was obtained.     

固相萃取柱上衍生气相色谱-质谱法测定水中烷基酚

以烷基酚(APs)主要降解产物辛基酚(4-t-OP)、壬基酚(4-n-NP)为研究对象,建立了固相萃取(SPE)柱上衍生化、气相色谱-质谱(GC-MS)法测定水中APs的分析方法。以C18柱为固相萃取柱、N,O-(三甲基硅)三氟乙酰胺(BSTFA)为硅烷化试剂,设计五因素四水平正交实验L16(45),对衍生化影响因素、衍生化溶剂、衍生化时间以及SPE主要影响因素pH值、盐度和洗脱剂进行优化;在优化条件下,方法的回收率(高于80%)和重现性(RSD低于10%)结果令人满意,4-t-OP和4-n-NP的仪器检出限分别为3.35ng/L和6.38ng/L。采用建立的方法,回收率略高于传统的SPE萃取衍生法,具有有机溶剂用量少,方法简单快速、灵敏度高的特点,适用于河水和海水中痕量烷基酚的快速测定。     

High oven temperature — cold on-column injection for the automated CGC analysis of high molecular weight compounds such as triglycerides

Modification of the Carlo-Erba cold on-column injector for (automated) analysis of high molecular compounds at high oven temperature is described. The secondary cooling tube of the cold on-column injector is replaced by a lengthened tube through which a high air flow is directed. The injection site is maintained at 65–70 °C while the oven is at high temperature (? 300 °C). For automated injection, a short deactivated precolumn of 22 to 30 cm × 0.53 mm i.d. is coupled to the analytical column via a butt connector with make-up gas supply. For a triglyceride mixture, automatically injected at 300 °C, the mean % deviation for all peak areas was 1.8% and the mean % deviation for all retention times was 0.09 % for five consecutive runs.     

Analysis of triglycerides by capillary gas chromatography with programmed-temperature injection

The capillary gas chromatographic analysis of complex naturally occurring and food-product triglyceride mixtures is accomplished qualitatively and quantitatively on columns coated with methyl and methyl-phenyl (65%) silicones using programmed-temperature split/splitless and on-column injection. Faster analysis times are achieved using elevated initial column oven temperatures with cold initial injector temperatures.     

Towards high peak capacity separations in normal pressure nanoflow liquid chromatography using meter long packed capillary columns

Single shot proteomics is a promising approach to high throughput proteomics analysis. In this strategy, long capillary columns are needed to perform long and shallow gradients to achieve high peak capacity and good peak width for informative mass spectrometric detection. Herein, we report that meter long capillary columns, packed with 5 μm particulate material, can be facilely fabricated based on single particle fritting technology. The long columns could reliably generate high peak capacities of 800 in 10 h long gradients for protein digest separations. The operation was within the pressure range (40 MPa) of the most widely used normal pressure nanoLC systems. Due to the excellent life time (>100 injections) and inter-column performance consistency, the meter long capillary columns reported here should be of practical usefulness in single shot proteomics without the need for ultra-high pressure instrumentation.