Long-wavelength GaInAsSb/AlGaAsSb DFB lasers emitting near 2.6 μm

We have successfully fabricated and characterized room temperature continuous wave (cw) GaInAsSb/AlGaAsSb distributed feedback lasers emitting in the wavelength region between 2.499 and 2.573 μm. To the best of our knowledge, this is the longest emission wavelength realized with a GaSb-based DFB laser diode. The laser structure used for DFB processing was grown by solid source molecular beam epitaxy. A DFB concept requiring no subsequent overgrowth step was used by defining first-order Cr-Bragg gratings laterally patterned to a ridge waveguide. Threshold currents smaller than 60 mA and room temperature cw output powers up to 6.5 mW were obtained. The laser diodes show single mode emission with side mode suppression ratios (SMSR) of up to 32 dB.     

A linearized vector radiative transfer model for atmospheric trace gas retrieval

We present a plane parallel radiative transfer model for polarized light, that provides the intensity vector as well as the derivatives of the four Stokes parameters with respect to atmospheric trace gas profiles. These derivatives are essential for retrieval of height resolved trace gas information from satellite measurements of backscattered sunlight. The model uses the Gauss-Seidel iteration technique for solving the radiative transfer equation. For the first time, the forward-adjoint radiative perturbation theory is applied for the linearization of a radiative transfer model including polarization. The accuracy of the model is better than 0.025% for all four Stokes parameters and better than 0.03% for the derivatives.     

Analytic evaluation of the weighting functions for remote sensing of blackbody planetary atmospheres: a general linearization approach

An analytic approach is proposed for the evaluation of weighting functions for remote sensing of a blackbody planetary atmosphere based on straightforward, general linearization. In the present paper, this approach is applied to the case of remote sensing with the nadir (down-looking) geometry. Expressions for weighting functions for various atmospheric parameters are derived. It is demonstrated that in a realistic case of temperature-dependent atmospheric absorption, an additional term appears in the expression for the temperature weighting function which contains the temperature derivative of the atmospheric absorption coefficient. The approach is applied to the case of a semi-infinite atmosphere and then, to the atmosphere of a finite optical depth with the underlying surface. In this, latter case, the expressions are also obtained for partial derivatives of observed radiances with respect to surface parameters: surface pressure, temperature and emissivity.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Effects of sugar inhibition on cellulases and β-glucosidase during enzymatic hydrolysis of softwood substrates

A quantitative approach was taken to determine the inhibition effects of glucose and other sugar monomers during cellulase and β-Glucosidase hydrolysis of two types of cellulosic material: Avicel and acetic acid-pretreated softwood. The increased glucose content in the hydrolysate resulted in a dramatic increase in the degrees of inhibition on both β-Glucosidase and cellulase activities. Supplementation of mannose, xylose, and galactose during cellobiose hydrolysis did not show any inhibitory effects on β-Glucosidase activity. However, these sugars were shown to have significant inhibitory effects on cellulase activity during cellulose hydrolysis. Our study suggests that high-substrate consistency hydrolysis with supplementation of hemicellulose is likely to be a practical solution to minimizing end-product inhibition effects while producing hydrolysate with high glucose concentration.     

PVA固定化脲酶电极的制作及电极特性的研究

利用PVA低温下的物理交联固定酶,制成酶电极并在不同尿素浓度、pH值、温度等条件下进一步研究这种酶电极的响应特性.     

Synthesis, Characterization and the Effect of Glucose-lowering of Guanidino Acid Oxovanadium（Ⅳ） Complexes

Two guanidino acid oxovanadium(Ⅳ) complexes have been synthesized. Preliminary tests in vivo have shown that the two title complexes all display lowering glucose activity in vivo to STZ-rats. The effect of glucose-lowering of guanidino acetic acid oxovanadium(Ⅳ) complex in vivo is higher than that of guanidino propanoic acid oxovanadium(Ⅳ) complex.     

大型液相色谱分离过程FAD－SMT数学模型及其数值解

提出大型液相色谱分离过程ＦＡＤ－ＳＭＴ数学模型，把色谱分离连续性方程转变为对流扩散方程和常微分方程组，并提出模型的数值方法，分析了数值解的稳定条件和收敛条件以及空间和时间步长的选取。实验结果表明，ＦＡＤ－ＳＭＴ数学模型计算的液相色谱分离葡萄糖、果糖和分离甘露醇、山梨醇理论与实验流出曲线相吻合。灵敏度分析结果表明：相平衡常数比轴向扩散系数和总传质系数对色谱分离有较大的影响。     

基于芘的荧光熄灭的单质碘荧光敏感膜的研究

单质碘熄灭固定于增塑的ＰＶＣ膜中的芘的荧光，且这种熄灭作用可逆。本据此研制了用于测定单质碘浓度的荧光敏感膜，最佳膜组成为２～４ｍｇ芘、５０ｍｇＰＶＣ粉、１００ｍｇ邻苯二甲酸二异辛酯，测定碘的浓度范围为２．２６×１０＾－５～１．０４×１０＾－３ｍｏｌ／Ｌ。此膜测定单质碘的重现性好，响应时间小于４０ｓ。除Ｆｅ＾３＋、Ｂｉ＾３＋外，其它常见离子均无干扰。将此膜用于食盐中碘的测定，结果令人满意。     

Electrochemical response of ascorbic acid at conducting and electrogenerated polymer modified electrodes for electroanalytical applications: a review

The present short review deals with electroanalytical aspects of electrochemical response of ascorbic acid (Vitamin C) at conducting and electrogenerated polymer modified electrodes. Two main topics are considered: (i) electrocatalytic oxidation of ascorbate at conducting polymer modified electrodes, leading to electroanalytical techniques for ascorbate assay, and (ii) retardation of ascorbate penetration through a layer of electrogenerated polymers, leading to permselective coatings and their diverse uses, especially for biosensing devices.