1．5GHz锯材超导腔的研制

介绍铌材超导腔的研制进展，重点讨论了国产铌腔的材料改性，以及相应的超导腔性能的改进．叙述了１．５ＧＨｚ铌腔的腔形设计，分析了铌材的射频性能和机械性能，制定了铌腔制作与后处理的特定工艺．最后给出了１．５ＧＨｚ铌材超导腔的低温实验结果．     

Ein Beitrag über Oxide vom Typ AMO4 (A = Ti3+, Cr3+; M = Nb5+, Ta5+)

A Contribution on Ternary Oxides of the AMO₄-Type (A = Ti³⁺, Cr³⁺; M = Nb⁵⁺, Ta⁵⁺ ) CrNbO₄, CrTaO₄, TiNbO₄, and TiTaO₄ were prepared by CO₂-laser technique. X-ray single crystal investigations show a random distribution of the metal ions in Rutil type structure, space group D–P4₂/mnm. Calculations of the free energy of reaction between Ti₂O₃ and Nb₂O₅ show higher stability of TiO₂ beside NbO₂. In TiNbO₄ both metals exhibit the oxidation state +4.     

SnO2-Nb2O5/MgAl2O4/α-Al2O3催化环氧乙烷水合制乙二醇

采用水热稳定的MgAl2O4尖晶石对-αAl2O3载体表面进行修饰,采用具有较强亲水性能的SnO2对活性组分Nb2O5进行修饰,制备了SnO2-Nb2O5/MgAl2O4/-αAl2O3催化剂,并用于环氧乙烷水合制乙二醇反应.采用X射线衍射、红外光谱和程序升温脱附研究了Sn/Nb摩尔比对催化剂酸性、环氧乙烷在催化剂表面的吸附状态和吸附强度以及催化剂性能的影响.结果表明,Sn/Nb摩尔比明显影响催化剂的组成和结构;催化剂的结构不同,环氧乙烷在催化剂表面的吸附强度存在明显差别,催化剂的催化性能明显不同.     

Structure and electronic transport properties of the Misfit layer compound (LaSe)1.14(NbSe2)2, „LaNb2Se5”︁

The new misfit layer compound (LaSe)_1.14(NbSe₂)₂ has been synthesized from the elements at 1050- and its structure has been determined by a composite approach. The structure has an alternating stacking sequence of [LaSe] and two [NbSe₂] layers along the c direction. The misfit of the two different layers is occurring along the a direction: a₁(LaSe)=6.0191 Å and a₂(NbSe₂)=3.4372 Å therefore yielding a ratio of 1.751 which is very close to 7/4. An investigation of electrical resistivity was done. The crystal shows superconducting properties at 5.3 K.     

Dispersion state and catalytic properties of vanadia species on the surface of V_2O_5/TiO_2 catalysts

The dispersion state and catalytic properties of anatase-supported vanadia species are studied by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), H2 temperature-programmed reduction (TPR) and the selective oxidation of o-xylene to phthalic anhydride. The almost identical values of the experimental dispersion capacity of V2O5 on anatase and the surface vacant sites available on the preferentially exposed (001) plane of anatase suggest that the highly dispersed vanadium cations are bonded to the vacant sites on the surface of anatase as derived by the incorporation model. When the loading amount of V2O5 is far below its dispersion capacity, the dispersed vanadia species might mainly consist of isolated VOx species bridging to the surface through V-O-Ti bonds. With the increase of V2O5 loading the isolated vanadia species interact with their nearest neighbors (either isolated or polymerized vanadia) through bridging V-O-V at the expenses of V-O-Ti bonds, resulting in the increase of the ra     

Adsorption of benzene on the V2O5/γ-Al2O3 catalyst

Adsorption of benzene on the V₂O₅/-Al₂O₃ catalysts was studied in the temperature interval from 443 to 493 K and at partial pressures of the adsorbate ranging from 1 to 400 Pa. The adsorption isotherms were plotted. The isosteric heats and various entropy characteristics of adsorption were determined. Mobility of benzene in the adsorption layer is restricted compared to the model of ideal dimeric gas. The adsorbed amounts of benzene and chlorobenzene are compared.     

Effect of intercalation of metal ions on the colloidal and solid properties of vanadium pentaoxide hydrate,V2O5 nH2O

The colloidal stability of V₂O₅ nH₂O was studied on the basis of the measurements of critical flocculation concentration (CFC) by metal ions, amount of ions exchanged (or intercalated), and -potential. In total, the CFC values obeyed the Schulze Hardy law and strong Hofmeister's series was found in the systems including alkaline ions. The sequence of colloidal stability of V₂O₅ nH₂O in the electrolyte solutions was related to the intercalation of metal ions in the interlayer spaces of the solid. The largest CFC value for Li⁺ (87 mmol dm^–3) was explained by smaller affinity of Li⁺ to be intercalated in V₂O₅ nH₂O as well as smaller Hamaker constant of the intercalated solid compared to the other systems.Effect of intercalation of metal ions on the crystalline properties of the materials was measured by use of XRD and electron microscope. Under highly dehydrated condition the ions whose radii are smaller than 0.1 nm are captured in the structure of V₂O₅ nH₂O without changing interlayer distances, while those larger than 0.1 nm increase the interlayer distance. In a saturated H₂O vapor interlayer distances increased with increasing charge of intercalated ions. However, when intercalated with ions carrying the same valency the interlayer distances of the sample decreased with decrease in the hydration property of ions. Hydrolyzable Cr³⁺ gave exceptionally larger interlayer distances, both in a vacuum and in H₂O vapor.     

The Effect of Nb Loading on Catalytic Properties of Ni/Ce0.75Zr0.25O2 Catalyst for Methane Partial Oxidation

In this study,the effect of Nb loading on the catalytic activity of Ce_(0.75)Zr_(0.25)O_2-supported Ni catalysts was studied for methane partial oxidation.The catalysts were characterized by BET,H_2 chemisorption,XRD,TPR,TEM and tested for methane partial oxidation to syngas in the temperature range of 400-800℃at atmospheric pressure.The results showed that the activity of methane partial oxidation on the catalysts was apparently dependent on Nb loading.It seemed that the addition of Nb lowered the catalytic activity for methane partial oxidation and increased the extent of carbon deposition. This might be due to the strong interaction between NiO and Nb-modified support and reduction of surface oxygen reducibility.     

Syntheses and Structures of Two New Cu/Nb/pyrazine Complexes: Three dimensional CuNb(pyz)2OF5 · (pyz)(H2O) and two dimensional [Cu(pyz)2.5]+ [NbF6]− · (pyz)

Crystals of CuNb(pyz)₂OF₅ · (pyz)(H₂O) ( 1 ) and [Cu(pyz)_2.5]⁺ [NbF₆]^? · (pyz) ( 2 ) were grown (150°C and autogeneous pressures) from CuO, 1/2(Nb₂O₅), (HF)_x · pyridine, and H₂O in excess pyrazine. Light blue single crystals of ( 1 ) are orthorhombic, crystallizing in space group Cccm (No. 66), with a = 14.547(1) Å, b = 16.135(2) Å, c = 13.803(2) Å, and Z = 8. The structure of ( 1 ) contains corner shared [Cu(pyz)_4/2F_2/2]⁺, [Cu(pyz)_4/2O_2/2], and [NbF₄O_1/2F_1/2]^?0.5 octahedra. Orange crystals of ( 2 ) are monoclinic, crystallizing in space group C2/c (No. 15), with a = 11.792(8) Å, b = 17.123(3) Å, c = 17.051(5) Å, β = 90.04(4)°, and Z = 8. The structure of ( 2 ) contains puckered rings of corner shared [Cu(pyz)(pyz)_3/2]⁺ tetrahedra and isolated [NbF₆]^? anions within the rings.     

Pore formation during the pyrolysis of C-Nb2O5 and C-Ta2O5 xerogels

Binary organic-inorganic gels have been prepared by mixing a carbonaceous hydrosol and a Nb₂O₅ or Ta₂O₅ sol derived by hydrolysis of the alkoxides. The gels are pyrolyzed under an inert atmosphere into precursors in which carbon and the metal oxides are mixed very intimately. High temperature treatment converts the precursors into the cubic face centered carbides. The precursors as well as the carbides have been shown to be micro- and mesoporous materials. Measurements of nitrogen adsorption reveal a characteristic change of the shapes of the isotherms (Type I Type IV) and of the hysteresis loops (H4H2H1) during the thermal processes. Pore widening has been observed with rising temperature. The phenomena of crystallization, carbothermal reduction and sintering were found to control the pore shape and size. The results of the adsorption measurement correlate well with those of the thermoanalytical and X-ray diffraction studies.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday