The effect of solvent ratio and water on the growth of C60 nanowhiskers

The growth of C₆₀ nanowhiskers (C₆₀NWs) prepared by a modified liquid–liquid interfacial precipitation method is investigated, focusing on the effect of solvent ratio and water content in the C₆₀–toluene–isopropyl alcohol (IPA) solution system. The precipitation of C₆₀NWs was markedly influenced by the solvent ratio of toluene to IPA, and the C₆₀NWs were found to grow longer above a critical diameter (D_c), which depends on the solvent ratio. The addition of a small amount of H₂O to the C₆₀–toluene–IPA solution promoted the growth of C₆₀NWs. This catalytic effect of water on the growth of C₆₀NWs was confirmed also by the experiment using heavy water (D₂O) and by the decrease of growth activation energy of C₆₀NWs with increase of H₂O content in the C₆₀–toluene–IPA solution.     

Extraction and Characterization of Cellulose Nanowhiskers from Balsa Wood

Summary: In this study cellulose nanowhiskers were obtained from balsa wood. For this purpose, fibers of balsa wood were exposed to hydrolysis reactions for lignin and hemicellulose digestion and acquisition of nano-scale cellulose. Transmission electron microscopy (TEM) results demonstrated that the obtained cellulose nanocrystals had average length and thickness of 176 (±68 nm) and 7.5 (±2.9 nm), respectively. Infrared spectroscopy (FTIR) and wide angle x-ray diffraction (WAXD) showed that the process for extracting the nanowhiskers digested nearly all the lignin and hemicellulose from the balsa fiber and still preserved the aspect ratio and crystallinity satisfactory enough for future application as nanofillers in polymer nanocomposites. The thermogravimetric analysis (TGA) showed that the onset temperature of thermal degradation of the cellulose nanocrystals (226 °C) was higher than the onset temperature of the balsa fiber (215 °C), allowing its use in molding processes with polymers melts.     

Using CLEM to investigate the distribution of nano-sized antimicrobial agents within an EVOH matrix

Efficient characterization of the distribution of antimicrobial agents within a polymer matrix is of vital importance. Two antimicrobial agents, chitin nanowhiskers (ChNWs) and chitosan-based silver nanoparticles (CTSAgNPs), were produced and incorporated separately as well as combined into a poly(ethylene-co-vinyl alcohol) (EVOH) matrix by way of electrospinning. Correlative light and electron microscopy (CLEM) and energy dispersive X-ray mapping provided a holistic approach to visualize the distribution of the combinations of AgNPs and ChNWs within EVOH fibers. CLEM analysis revealed the tendency of the ChNWs to align themselves on the surface of the fibers, while the silver nanoparticles were localized inside the polymer matrix.     

Bionanocomposite based on cellulose nanowhisker from oil palm biomass-filled poly(lactic acid)

Cellulose nanowhiskers (CNW) extracted from plant fibers exhibit remarkable properties that make them suitable for use in the development of bionanocomposites. CNW have demonstrated the capability to enhance the properties of a polymer matrix at low filler loading. In this study, poly (lactic acid) (PLA) bionanocomposites were prepared using the solution casting technique, by incorporating the PLA with the CNW obtained from an oil palm empty fruit bunch (OPEFB). Fourier transform infrared spectroscopy showed no significant changes in the PLA peak positions, which indicates that incorporating the CNW into the PLA did not result in any significant changes in the chemical structure of the PLA. Thermogravimetric analysis, on the other hand, revealed that the bionanocomposites (PLA-CNW) had better thermal stability than the pure PLA. The tensile strength of PLA-CNW increased by 84% with the addition of 3 parts of CNW per hundred resins (phr), and decreased thereafter. Moreover, a linear relationship was observed between the Young's modulus and CNW loading. Elongation at break, however, decreased with the addition of 1-phr CNW, and remained constant with further addition. Transmission electron microscopy revealed that agglomeration of CNW occurred at 5-phr loading, consistent with the tensile strength results. Overall, the CNW obtained from OPEFB can enhance the tensile and the thermal properties of bionanocomposites.     

Synergistic effect of cellulose nanowhiskers reinforcement and dicarboxylic acids crosslinking towards polyvinyl alcohol properties

In the presented work, a significant increase in the tensile strength of the PVA composite material is reported. The obtained best value of 122 MPa and 14.6% swelling shows the excellent synergistic effect of both crosslinker and reinforcement material. The composite films were prepared by simple mechanical dispersion of reinforcement material, bacterial cellulose nanowhiskers (BCNW) into PVA solution followed by crosslinking with diacids, succinic acid (SuA), and adipic acid (AdA). The effect of aliphatic carbon chain length of crosslinker on thermal, mechanical, and water uptake properties is evaluated and discussed in detail. Neat PVA had the strength of 37.3 MPa. With 5% reinforcement of BCNW, that is, without crosslinking, it exhibited 97% increase, that is, 74.5 MPa. With crosslinking of 15 mmol of SuA and AdA PVA films for 2 h had excellent thermal properties with swelling percentage of 19 and 26.6% and tensile strength of 103 and 67 MPa, respectively. The best result obtained was for 5% BCNW–PVA films crosslinked with 15 mmol SuA. These results were explained on the basis of synergetic crosslinking and extended hydrogen bonding between PVA and reinforcement material. The composite films can be used as biological implants, a membrane for pervaporation and filtration system, etc. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2515–2525     

Controlled Synthesis and Electrochemical Behavior of Single-crystal MoO2 Nanowhiskers by a Facile Precursor-reduction Route

Among the transition-metal oxides, molybdenum oxides are the focus of much attention owing to its numerous applications in catalysts, additives, sensors, photochromic and electrochromic materials1. Especially, the applications of MoO2 in optical propertie…     

Facile preparation of chitin nanowhisker–gold nanocluster hybrids: effect of feeding ratio and surface amino group contents on gold absorption amount

Chitin nanowhiskers (ChNWs) hybridized with the densely adsorbed gold nanoclusters (AuNCs) were facilely prepared by a simple mixing of aqueous suspensions of ChNWs and AuNCs. Adsorption of AuNCs on the ChNW surface was confirmed by transmission electron microscopy and scanning electron microscopy with energy dispersive X‐ray spectroscopy. The amounts of adsorbed AuNCs measured by thermogravimetry and combustion using a muffle furnace were in good agreement. While the amount of adsorbed AuNCs increased with AuNCs/ChNWs feeding ratio, we found only a weak dependence of adsorbed AuNC amount on the surface amino group content of ChNWs controlled by pre‐deacetylation of the starting chitin. Copyright © 2016 John Wiley & Sons, Ltd.     

Cellulose Nano Whiskers (CNWs) Loaded-Poly(sodium acrylate) Hydrogels. Part-I. Effect of Low Concentration of CNWs on Water Uptake

In this work, de-watered cellulose pulp(DCP), obtained from a paper mill, have been acid-hydrolyzed to yield cellulose nano-whiskers (CNWs). As revealed from FESEM measurements, these CNW were found to possess a median length of 258.5 nm, diameter of 35.2 nm, and an aspect ratio of 7.3. The CNWs were also characterized by TGA, XRD and FTIR analysis. The CNWs were found to possess a fairly high Crystallinity Index (CI) of 0.925. The addition of cellulose at low concentration range, i.e., from 25 to 125 mg (nearly 1.25 to 6.25 weight percent of polymer sodium acrylate) caused an enhancement in water uptake of resulting hydrogels .The CNWs-loaded poly(SA) hydrogels showed chain relaxation controlled swelling in the medium of pH 7.4 as was confirmed from the swelling exponent ‘n’ values obtained using power function law‥ The second order kinetic model was found to fit well to the kinetic water uptake data. However, all the samples, when prepared in the form of films, did not show any remarkable increase in their mechanical strength.     

A3B5 nanowhiskers: MBE growth and properties

The structural properties of GaAs nanowhiskers (NWs) grown by molecular beam epitaxy (MBE) are investigated. Under optimal growth conditions, the aspect ratio of MBE grown GaAs NWs is higher than 100. The maximum length of NWs is several times (up to 10) larger than the effective thickness of deposited GaAs. A kinetic model of the diffusion-induced NW rowth is used to predict the dependence of NW length on the technologically controlled MBE growth conditions. The obtained results demonstrate that the NW growth is controlled by the adatom diffusion towards their tip rather than by the conventional vapor-liquid-solid mechanism. The growth conditions influence on the NW morphology may be used for the controlled fabrication of NWs by MBE for different applications. Presented at the X-th Symposium on Suface Physics, Prague, Czech Republic, July 11–15, 2005.     

De-sulfation of cellulose nanowhiskers and its effects on the dispersion behavior of graphene

The role of negative charges on cellulose nanowhiskers (CNWs) in the aqueous dispersion behaviors of graphene has been investigated. The sulfate groups were partially removed from the CNWs with sodium hydroxide solution. Both CNWs and desulfated cellulose nanowhiskers (D-CNWs) were applied in the aqueous dispersion process of graphene. The dispersing result was evaluated by ultraviolet-visible (UV-Vis) absorption spectra. It revealed the dispersing ability of D-CNWs became worse due to the removal of sulfate groups. It demonstrated the negative charged sulfate groups on CNWs played an important role in the graphene dispersing process.