Highly scalable and low cost binder free electrode of Zinc modified NiO nanofoam for dual role of supercapacitor and its free radical scavenging activity

In this study, pristine nickel oxide (NiO) and Zinc modified NiO nanofoams were prepared by green approach using camellia sinensis leaves extract. Pristine nickel oxide and Zn²⁺ modified NiO nanofoam were characterized by XRD, FTIR, FL, UV and FESEM. FE-SEM micrographs were clearly shows that the synthesised porous nanofoam with spherical shaped were constant distribution. The as prepared foam electrodes showed excellent supercapacitive behaviour with increase in specific capacitance with decrease in scan rate. The maximum specific capacitance 1530, 1706 and 1847Fg^-1 was obtained at scan rate of 10 mVs^-1 for increasing the Zn concentrations. After 3,000 cycles at 1 A g⁻¹, the cyclic stability remains excellent at 88.1% of the initial capacitance. Moreover, the as-prepared asymmetric supercapacitor exhibits a high energy density of 30.6 W h·kg⁻¹ at power density of 398 W kg⁻¹. This study is expected to provide new insights into exploring the potential mechanism of catalyst action. These findings show that Zinc @ NiO nanofoam could be a potentially useful electrode material for energy storage devices.     

Synthesis and characterization of ZnCo2O4 nanomaterial for symmetric supercapacitor applications

ZnCo₂O₄ nanomaterial was prepared by co-precipitation method and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), cyclic voltammetry (CV), and galvanostatic charge–discharge tests at various current densities. It is shown that the crystal structure and surface morphology play an important role in the enhancement of the specific capacitance. The TEM results clearly indicate that the prepared material shows aggregated particles. The particle size powder was about 50 nm, and SEM pictures indicate a porous morphology. The electrochemical behavior of ZnCo₂O₄ was characterized by mixing equal proportion of carbon nanofoam (CNF). From CV, it is concluded that the combination of redox and pseudo-capacitance increases the specific capacitance up to 77 F g⁻¹ at 5 mV s⁻¹ scan rate. The ZnCo₂O₄-based supercapacitor cell has good cyclic stability and high coulombic efficiency.     

Construction of Rich Conductive Pathways from Bottom to Top: A Highly Efficient Charge-Transfer System Used in Durable Li/Na-Ion Batteries at −20 °C

The construction of potential electrode materials with wide temperature property for high-energy-density secondary batteries has attracted great interest in recent years. Herein, a hybrid electrode, consisting of a nitrogen-doped carbon/α-MnS/flake graphite composite (α-MnS@N-C/FG), is prepared through a post-sulfurization route. In the α-MnS@N-C/FG composite, α-MnS nanoparticles wrapped by the N−C layer are uniformly embedded onto FG, forming a novel nanofoam structure. The as-obtained α-MnS@N-C/FG shows excellent lithium/sodium storage performance, with a specific capacity of 712 mA h g⁻¹ in the 700th cycle at 1.0 A g⁻¹ or 186.4 mA h g⁻¹ in the 100th cycle at 100 mA g⁻¹ using lithium or sodium foil as the counter electrode, respectively. Moreover, even operated at −20 °C, the α-MnS@N-C/FG can still attain a high specific capacity of 350 mA h g⁻¹ after 50 cycles at 100mA g⁻¹ for LIBs. This exceptional electrochemical response is attributed to the synergetic effect of the smart design of a hybrid nanofoam structure, in which the FG skeleton and N-C coating layer can significantly enhance the conductivity of the whole electrode from bottom to top. Accordingly, the enhanced redox kinetics endow the electrode with pseudocapacitive-dominated electrochemical behavior, leading to fast electrode reactions and robust structural stability in the whole electrode.     

Preparation and characterization of a polyimide nanofoam through grafting of labile poly(propylene glycol) oligomer

Preparation of a polyimide nanofoam (PI‐F) for microelectronic applications was carried out using a polyimide precursor synthesized from poly[(amic acid)‐co‐(amic ester)] and grafted with a labile poly(propylene glycol) (PPG) oligomer. Polyimide precursor was synthesized by partial esterification of poly(amic acid) (PAA) derived from pyromellitic dianhydride (PMDA) and 4,4′‐oxydianiline (ODA). The precursor was then grafted with bromide‐terminated poly(propylene glycol) in the presence of K₂CO₃ in hexamethylphosphoramide and N‐methylpyrrolidone, imidized at 200°C in nitrogen and the product was subsequently decomposed in air at 300°C to eliminate the labile PPG oligomer to produce PMDA/ODA polyimide nanofoam. Nuclear magnetic resonance spectroscopy (¹H‐NMR) and Fourier transform infrared spectroscopy (FT‐IR) techniques were used to characterize the formation of polyimide precursor and extent of grafting of PPG with polyimide. The results of thermogravimetric analysis (TGA) showed three step decomposition of nanofoam with the removal of PPG at 350°C and decomposition of polyimide at around 600°C. The polyimide nanofoams were also characterized by small angle X‐ray scattering (SAXS), field‐emission scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM). The morphology showed nanophase‐separated structures with uniformly distributed and non‐interconnected pores of 20–40 nm in size. Dynamic mechanical analysis (DMA) indicated higher storage modulus for the foamed structure compared to the pure PI with reduction in loss tangent for the former system. Copyright © 2004 John Wiley & Sons, Ltd.     

Transmission electron microscopy of 3F/PMDA-polypropylene oxide triblock copolymer based nanofoams

Transmission electron microscopy was performed on a polymeric nanofoam material, derived from a triblock copolymer composed of a fluorinated polyimide center block, 3F/PMDA (derived from pyromelletic dianhydride (PMDA) and 1,1-bis(4-aminophenyl)-1-phenyl-2,2,2-trifluoroethane (3F)) and polypropylene oxide (PO) end blocks. The cast and imidized polymer exhibits a microphase-separated morphology consisting of PO microdomains within a polyimide matrix. The final nanofoam material is obtained by decomposing PO microdomains into low molecular weight products, which diffuse out of the polyimide matrix leaving nanometer length scale voids. Ruthenium tetroxide staining prior to microscopy was used to enhance the contrast between the 3F/PMDA matrix and the PO microdomains or voids, which permitted a more detailed view of the microstructure of both the foamed and unfoamed materials. From the power spectra of the micrographs, spatial correlation between the PO microdomains in the unfoamed material and between the voids in the foam were found. An interdomain separation distance of ca. 37 nm was observed. Analysis of the image yielded an average area of 411 nm² for the PO domains. The analysis indicated that the PO domains were oblong, having average major and minor dimensions of 35 and 12.5 nm, respectively. An autocorrelation of the image showed that the domain center of masses were positioned 41 nm apart, in close agreement with the domain spacing (ca. 37 nm) found as described above. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1067–1076, 1997     

High Tg polyimide nanofoams derived from pyromellitic dianhydride and 1,1-bis(4-aminophenyl)-1-phenyl-2,2,2-trifluoroethane

New routes for the synthesis of high T_g thermally stable polymer foams with pore sizes in the nanometer regime have been developed. Foams were prepared by casting well-defined microphase-separated block copolymers comprised of a thermally stable block and a thermally labile material. At properly designed volume fractions the morphology provides a matrix of the thermally stable material with the thermally labile material as the dispersed phase. Upon thermal treatment, the thermally unstable block undergoes thermolysis generating pores, the size and shape of which are dictated by the initial copolymer morphology. Triblock copolymers comprised of a high T_g, amorphous polyimide matrix with poly(propylene oxide) as the thermally decomposable coblock, were prepared. The copolymer synthesis was conducted through the poly(amic acid) precursor and subsequent cyclodehydration to the polyimide by either thermal or chemical means. Dynamic mechanical analysis confirmed microphase separated morphologies for all copolymers, irrespective of the propylene oxide block lengths investigated. Upon decomposition of the thermally labile coblock, a 9–18% reduction in density was observed, consistent with the generation of a foam which was stable to 400°C. © 1996 John Wiley & Sons, Inc.