Targeted Hybrid Nanocarriers as a System Enhancing the Skin Structure

The skin is constantly exposed to external and internal factors that disturb its function. In this work, two nanosystems-levan nanoparticles and a surfactin-stabilized nanoemulsion were preserved (tested for microbial growth) and characterized (size, polydispersity, Zeta potential, and stability). The nanosystems were introduced in the model formulations-cream, tonic, and gel, and confirmed by TEM. The analysis showed that nanoemulsion has a spherical morphology and size 220–300 nm, while levan nanoparticles had irregular shapes independently of the use of matrix and with particle size (130–260 nm). Additionally, we examined the antiradical effect of levan nanoparticles and nanoemulsion in the prototype of formulations by scavenging DPPH (2,2-diphenyl-1-picrylhydrazyl; EPR spectroscopy). The model cream with both nanosystems and the whole range of products with nanosystems were evaluated in vivo for hydration, elasticity, smoothness, wrinkles and vascular lesions, discoloration, respectively. The cream improved skin condition in all tested parameters in at least 50% of volunteers. The use of more comprehensive care, additionally consisting of a tonic and gel, reduced the previously existing skin discoloration to 10.42 ± 0.58%. The presented prototype formulations are promising in improving skin conditions.     

Antioxidant Activity Degradation,Formulation Optimization,Characterization, and Stability of Equisetum Arvense Extract Nanoemulsion

Equisetum arvense supercritical CO₂ extracts (EAE) contained an initial antioxidant activity of 10.3 mM TEAC that suffered a sharp first order kinetics decay characterized by half-life time (t_1/2) of 1.05 ± 0.03 and 0.86 ± 0.03 weeks at 25 and 4°C, respectively. The aim of the present work was to develop a nanoemulsion formulation for providing EAE protection against deleterious environmental factors and extending its shelf-life functionality. The nanoemulsion area was identified by constructing pseudoternary phase diagrams and response surface methodology was used to optimize the preparation conditions. The best formulation achieved an EAE encapsulation efficiency of 97.5 ± 0.5% and antioxidant activity half-life time (t_1/2) was extended to 12.32 ± 0.40 and 14.56 ± 0.60 weeks at 25 and 4°C, respectively.      

Design and Development of Oral Oil-in-Water Nanoemulsion Formulation Bearing Atorvastatin: In Vitro Assessment

The objective of the present investigation was to design a thermodynamically stable and dilutable nanoemulsion formulation of AT-Ca with minimum surfactant concentration that could improve its solubility as well as its oral bioavailability. The composition of optimized nanoemulsion formulation was Sefsol 218 and oleic acid (1:1) 10% w/w, as an oil phase, Tween-20 (19% w/w) as a surfactant, Carbitol (19% w/w) as a cosurfactant and distilled water (52% w/w) as an aqueous phase, containing 10 mg of AT. The optimized formulation showed higher% drug release (99.34%), lower droplet size (42.8 ± 0.42 nm) with low polydispersity index (0.237 ± 0.012), less viscosity (27.51 ± 1.01 cP) and infinite dilution capability. In vitro drug release from the nanoemulsion formulations was highly significant (p < 0.01) as compared to drug suspension.     

Formulation of Risperidone as Self-Nanoemulsifying Drug Delivery System in Form of Effervescent Tablets

Risperidone is an atypical antipsychotic drug used to treat schizophrenia. This study aims to formulate risperidone as effervescent tablets to improve patient compliance. Different nanoemulsion combinations were loaded with risperidone to improve its poor water solubility then adsorbed on Aeroperl. The formula showing highest drug dissolution was formulated as effervescent tablets. Factorial design was applied for different tablet formulation variables and the prepared formulae were tested for different criteria in comparison with their corresponding formulae containing drug without nanoemulsion formulation. Statistical analysis was used to determine the most desirable tablet formula considering its Carr index, effervescence time, and drug release.     

Preparation of Catechin Nanoemulsion from Oolong Tea Leaf Waste and Its Inhibition of Prostate Cancer Cells DU-145 and Tumors in Mice

Anti-cancer activity of catechin nanoemulsions prepared from Oolong tea leaf waste was studied on prostate cancer cells DU-145 and DU-145-induced tumors in mice. Catechin nanoemulsions composed of lecithin, Tween-80 and water in an appropriate proportion was prepared with high stability, particle size of 11.3 nm, zeta potential of −67.2 mV and encapsulation efficiency of 83.4%. Catechin nanoemulsions were more effective than extracts in inhibiting DU-145 cell growth, with the IC₅₀ being 13.52 and 214.6 μg/mL, respectively, after 48 h incubation. Furthermore, both catechin nanoemulsions and extracts could raise caspase-8, caspase-9 and caspase-3 activities for DU-145 cell apoptosis, arresting the cell cycle at S and G2/M phases. Compared to control, catechin nanoemulsion at 20 μg/mL and paclitaxel at 10 μg/mL were the most effective in reducing tumor volume by 41.3% and 52.5% and tumor weight by 77.5% and 90.6% in mice, respectively, through a decrease in EGF and VEGF levels in serum.     

Water-in-Oil-in-Water Nanoemulsions Containing Temulawak (Curcuma xanthorriza Roxb) and Red Dragon Fruit (Hylocereus polyrhizus) Extracts

Hydrophobic curcumin in temulawak extract and hydrophilic betacyanin in red dragon fruit extract are high-value bioactive compounds with extensive applications in functional food. In this study, these extracts were encapsulated in water-in-oil-in-water (w/o/w) nanoemulsions as a delivery system using a two-step high-energy emulsification method. PGPR and Span 20 were used as lipophilic emulsifiers for the primary w/o emulsion. The most stable w/o/w formulation with the least oil phase separation of 5% v/v consisted of w/o emulsion (15% w/w) and Tween 80 (1.5% w/w) as hydrophilic emulsifier. The formulation was characterized by a 189-nm mean droplet diameter, 0.16 polydispersity index, and –32 mV zeta potential. The freeze–thaw stability may be attributed to the combination of low w/o emulsion content and high Tween 80 concentration in the outer water phase of the w/o/w nanoemulsions used in this study. The IC₅₀ values of the nanoemulsion and the red dragon fruit extract were similar. It means that the higher concentration of curcumin in the nanoemulsions and the lower IC₅₀ value of temulawak extract ensured sufficient antioxidant activities of the w/o/w nanoemulsions.     

Development and validation of HPLC method for simultaneous estimation of piperine and guggulsterones in compound Unani formulation (tablets) and a nanoreservoir system

An attempt has been made to develop and validate a simultaneous HPLC method for novel approach of drug release via oil‐in‐water (o/w) nanoemulsion formulation and Habb‐e‐Khardal Unani tablet containing piperine and guggul sterones E and Z as main ingredients. Nanoemulsion was prepared by titration method using sefsol‐218 as an oily phase, cremophor‐EL as a surfactant, transcutol as a co‐surfactant and distilled water as an aqueous phase. The formulation was optimized on the basis of thermodynamic stability and dispersibilty test. The nanoformulation was evaluated for particle size, surface morphology, electrical conductivity and viscosity determination. The in vitro dissolution was carried out by dialysis bag method. Drugs were quantified using an HPLC method developed in‐house with a C₁₈ column as stationary phase and acetonitrile and water as mobile phase at λ_max of 240 nm. The optimized formulation showed higher drug release, lower droplet size and less viscosity as compared with the conventional Habb‐e‐Khardal Unani tablet. The present study illustrated the potential of nanoemulsion dosage form in improving biopharmaceutic performance of piperine and guggul sterone. The HPLC method was also found to be quite sufficient for the routine quality control of formulations containing piperine and guggul sterone E and Z as ingredients and also for in vitro drug release studies. Copyright © 2011 John Wiley & Sons, Ltd.     

Stability‐indicating HPTLC method for quantitative estimation of silybin in bulk drug and pharmaceutical dosage form

In the present study a novel stability‐indicating high‐performance thin‐layer chromatography (HPTLC) method for quantitative determination of silybin in bulk drug and nanoemulsion formulation has been developed and validated on silica using solvent chloroform–acetone–formic acid (9 : 2 : 1 v/v/v) (R_f of silybin 0.46 ± 0.05) in the absorbance mode at 296 nm. The method showed a good linear relationship (r² ± 0.999) in the concentration range 25–1500 ng per spot. It was found to be linear, accurate, precise, specific, robust and stability‐indicating and can be applied for quality control and standardization of several multi‐component hepatoprotective formulations as well as for stability testing of different dosage forms. The method proposed was also used to investigate the kinetics of acidic and alkaline degradation processes by quantification of drug at different temperature to calculate the activation energy and half‐life for silymarin degradation. Copyright © 2009 John Wiley & Sons, Ltd     

Silicone nanomicelle dyeing method on polyester fibre: Comparative evaluation of chemical properties,fastness properties,and DFT

Disperse Red 177(9a), Disperse Red 343(9b), Disperse Blue 165(9c), Disperse Blue 165.1(9d), Disperse Blue 366(9e), and Disperse Blue 148(9f) were examined in the solvent. During silicon nanomicelle dyeing, we employed 9(a–f) azo disperse dyes on polyester. On polyester fabric, dye 9(a–f) offers equal washing, light, and rubbing fastness in both the conventional and silicone nanomicelle techniques. The dye can now be transported directly into the fibre core without the use of auxiliary dyes owing to the reduction in the particle size of azo dyes, which is made possible by nanoemulsions superior dispersion. The levelling property of the dispersed dye is enhanced by the dyeing process. When both techniques are applied, the lightfastness properties of all dyes are improved. It provides a very good to outstanding protection factor for textile materials. These 9(a–f) azo disperse dyes have moderate to outstanding photostability, net electrophilicity index, and lightfastness.     

Diallyl Trisulfide,the Antifungal Component of Garlic Essential Oil and the Bioactivity of Its Nanoemulsions Formed by Spontaneous Emulsification

The aim of this study was to evaluate the chemical compounds of garlic essential oil (EO), and determine the antifungal efficacy of garlic EO and its major components, diallyl trisulfide and its nanoemulsions against wood-rotting fungi, Trametes hirsuta and Laetiporus sulphureus. GC-MS analysis revealed that the major constituents of garlic EO were diallyl trisulfide (39.79%), diallyl disulfide (32.91%), and diallyl sulfide (7.02%). In antifungal activity, the IC₅₀ value of garlic EO against T. hirsuta and L. sulphureus were 137.3 and 44.6 μg/mL, respectively. Results from the antifungal tests demonstrated that the three major constituents were shown to have good antifungal activity, in which, diallyl trisulfide was the most effective against T. hirsuta and L. sulphureus, with the IC₅₀ values of 56.1 and 31.6 μg/mL, respectively. The diallyl trisulfide nanoemulsions showed high antifungal efficacy against the examined wood-rotting fungi, and as the amount of diallyl trisulfide in the lipid phase increases, the antifungal efficacy of the nanoemulsions increases. These results showed that the nanoemulsions and normal emulsion of diallyl trisulfide have potential to develop into a natural wood preservative.