Simultaneous formation of platinum‐based nanocatalysts and degradation of dyes at oil/water interface: Comparative morphological and kinetic studies

To decrease the water pollution of textile industries with a large amount of toxic and non‐biodegradable colored dye effluents, an efficient technique is required to safely remove harmful pollutants. In this paper, the reaction between azo dyes and NaBH₄ catalyzed by nanoparticles (NPs) thin films has been studied. We report insitu degradation of methyl orange (MO) and methyl red (MR) by using Pt‐based thin films monitored by UV–Vis spectroscopy. We have synthesized different thin films such as Pt, PtPd, PtFeFe₂O₃, PtNi and PtAu films from Pt organometallic precursor in the MO and MR medium (dye degradation and NPs formation is happened simultaneously) and activity of these films were compared in the complete degradation of MO and MR dyes. Rate constants for the catalyzed reactions have been determined. PtPd NPs thin film has shown the highest rate constant for the degradation of MO and MR within only a few seconds due to its well‐ordered structure. Furthermore, the effect of presence of MO on the morphology of NPs was investigated.     

Effect of addition of iron on morphology and catalytic activity of PdCu nanoalloy thin film as catalyst in Sonogashira coupling reaction

Palladium‐supported catalysts are complex assemblies with a challenging preparation. Minor changes in their preparation conditions can affect the activity, selectivity and lifetime of these catalysts. PdCuFe nanoparticle (NP) thin films were supported on reduced graphene oxide (RGO) by the reduction of the organometallic complex [PdCl_2‌(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), and [Cu(acac)₂] and [Fe(acac)₃] (acac = acetylacetonate) complexes at a toluene–water interface. We have investigated the application of the liquid–liquid interface method for preparing ultrathin films of catalysts and have evaluated the catalytic activity of the prepared NPs for the Sonogashira coupling reaction in micelle media. Also, we have investigated the effect of the addition of iron on the morphology, size and catalytic activity of PdCu/RGO NPs. Our study shows that both of the prepared catalysts (PdCu/RGO and PdCuFe/RGO) are efficient and recoverable catalysts for the Sonogashira carbon–carbon coupling reaction. This method has advantages compared to other routes, such as short reaction times, high to excellent yields, facile and low‐cost method for the preparation of the catalysts, and easy separation and reusability of the catalysts.     

Exploring AuRh Nanoalloys: A Computational Perspective on the Formation and Physical Properties

We studied the formation of AuRh nanoalloys (between 20–150 atoms) in the gas phase by means of Molecular Dynamics (MD) calculations, exploring three possible formation processes: one-by-one growth, coalescence, and nanodroplets annealing. As a general trend, we recover a predominance of Rh@Au core-shell ordering over other chemical configurations. We identify new structural motifs with enhanced thermal stabilities. The physical features of those selected systems were studied at the Density Functional Theory (DFT) level, revealing profound correlations between the nanoalloys morphology and properties. Surprisingly, the arrangement of the inner Rh core seems to play a dominant role on nanoclusters’ physical features like the HOMO-LUMO gap and magnetic moment. Strong charge separations are recovered within the nanoalloys suggesting the existence of charge-transfer transitions.     

Fe-Co Alloyed Nanoparticles Catalyzing Efficient Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol in Water

Selective hydrogenation of C=O against the conjugated C=C in cinnamaldehyde (CAL) is indispensable to produce cinnamyl alcohol (COL). Nonetheless, it is challenged by the low selectivity and the need to use organic solvents. Herein, for the first time, we report the use of Fe-Co alloy nanoparticles (NPs) on N-doped carbon support as a selective hydrogenation catalyst to efficiently convert CAL to COL. The resultant catalyst with the optimized Fe/Co ratio of 0.5 can achieve an exceptional COL selectivity of 91.7 % at a CAL conversion of 95.1 % in pure water medium under mild reaction conditions, ranking it the best performed catalyst reported to date. The experimental results confirm that the COL selectivity and CAL conversion efficiency are, respectively promoted by the presence of Fe and Co, while the synergism of the alloyed Fe-Co is the key to concurrently achieve high COL selectivity and CAL conversion efficiency.     

CoPd Nanoalloys with Metal–Organic Framework as Template for Both N-Doped Carbon and Cobalt Precursor: Efficient and Robust Catalysts for Hydrogenation Reactions

In this work, a series of metal–organic framework (MOF)-derived CoPd nanoalloys have been prepared. The nanocatalysts exhibited excellent activities in the hydrogenation of nitroarenes and alkenes in green solvent (ethanol/water) under mild conditions (H₂ balloon, room temperature). Using ZIF-67 as template for both carbon matrix and cobalt precursor coating with a mesoporous SiO₂ layer, the catalyst CoPd/NC@SiO₂ was smoothly constructed. Catalytic results revealed a synergistic effect between Co and Pd components in the hydrogenation process due to the enhanced electron density. The mesoporous SiO₂ shell effectively prevented the sintering of hollow carbon and metal NPs at high temperature, furnishing the well-dispersed nanoalloy catalysts and better catalytic performance. Moreover, the catalyst was durable and showed negligible activity decay in recycling and scale-up experiments, providing a mild and highly efficient way to access amines and arenes.     

Solvothermal Preparation and Effects of Mixed Solvent on the Properties of Copper Indium Diselenide Nanoalloys

We have developed a simple solvothermal method by using solvent mixtures of ethylenediamine with ethanol and deionized water to produce the CuInSe₂ nanoalloys. The phase structure, morphology, elemental composition and optical band gap (E_g) of synthesized the CuInSe₂ nanoalloys were characterized by Raman spectroscopy, X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDS) and zeta potential particle sizer measurements. The factors affecting product purity in the mixed solvent are also discussed. The results showed that CuInSe₂ nanoalloys with a chalcopyrite tetragonal structure were produced by adjusting the ratio of ethylenediamine to ethanol (1:2.33 by volume) and their corresponding energy band gap was found to be 1.27 eV. In addition, we prepared and coated the CuInSe₂ ink on the Mo substrate by the doctor blade method to produce a compact thin film. The crystallinity and the morphology of these polycrystalline CuInSe₂ films were characterized.     

Strategies for increasing the efficiency of a genetic algorithm for the structural optimization of nanoalloy clusters

An improved genetic algorithm (GA) is described that has been developed to increase the efficiency of finding the global minimum energy isomers for nanoalloy clusters. The GA is optimized for the example Pt12Pd12, with specific investigation of: the effect of biasing the initial population by seeding; the effect of removing specified clusters from the population ("predation"); and the effect of varying the type of mutation operator applied. These changes are found to significantly enhance the efficiency of the GA, which is subsequently demonstrated by the application of the best strategy to a new cluster, namely Pt19Pd19.     

Silver‐Palladium Nanoalloys Modified Carbon Ionic Liquid Electrode with Enhanced Electrocatalytic Activity Towards Formaldehyde Oxidation

Electrocatalysis of the oxidation of formaldehyde on silver‐palladium‐modified carbon ionic liquid electrode (AgPd/CILE) was investigated in 0.1 M NaOH. The electrochemical performance of the AgPd/CILE was compared with those of Pd/CILE and Ag/CILE. Ag plays an important role in the catalytic performance of AgPd nanocatalyst and yields an excellent antifouling effect. Amperometric measurements showed that AgPd/CILE is a promising sensor for the detection of formaldehyde in the range of 10.0 µM–70.0 mM with a sensitivity of 240.6 µA mM^?1 cm^?2 and a detection limit of 2 µM. The method is free from interference of methanol, ethanol and formic acid.