Nonvolatile photorefractive holographic recording in Sc:Ce:Cu:LiNbO3

In this paper experimental studies of nonvolatile photorefractive holographic recording in Ce:Cu:LiNbO₃ crystals doped with Sc(0,1,2,3 mol%) were carried out. The Sc:Ce:Cu:LiNbO₃ crystals were grown by the Czochralski method and oxidized in Nb₂O₅ powders. The nonvolatile holographic recording in Sc:Ce:Cu:LiNbO₃ crystals was realized by the two-photon fixed method. We found that the recording time of Sc:Ce:Cu:LiNbO₃ crystal became shorter with the increase of Sc doping concentration, especially doping with Sc(3 mol%), which exceeds the so-called threshold, and there was little loss of nonvolatile diffraction efficiencies between Sc(3 mol%):Ce:Cu:LiNbO₃ and Ce:Cu:LiNbO₃ crystals.     

Improvement of real time diffraction efficiency of NGD holograms by introducing electron donors

Nongelatin dichromated holographic film(NGD) is a new holographic recordingmaterial.Holograms recorded on this material have better environmental stability, higherdiffraction efficiency and stronger real time effect, etc..An experimental study to ascertainthe influence of two electron donors, namely,N,N-dimethylformamide(DMF) and dimethyl-sulfoxide(DMSO),on the real time diffraction efficiency(RTDE) of NGD holograms is car-ried out.The pressence of electron donors not only improves the sensitivity,but also enhancesthe real time effect greatly.RTDE of above 60% at±1 orders of NGD plane transimissiongrating is achieved by introducing electron donors.     

Evaluation of gap length fluctuation with harmonic analysis method

Gap length (GL) of reading head is one of the most critical parameters for high-density magnetic recording systems. A novel method is proposed for quantitative evaluation of the GL fluctuation among a batch of magneto-resistive/giant magneto-resistive heads with same structure design. The method works at head-gimbal assembly level and the evaluation can be done with any read/write analysis equipment. The testing process is based on harmonic analysis of the readback signal. The testing system consists of a selected reference head and sample heads for evaluation. A GL variation function is introduced for the evaluation of GL deviation between the reference head and sample head. This method proved to be easy for implementation and results suggest that variation of GL is considerable and has obvious effect on recording performance in high recording density systems.     

Micromagnetic analysis of transition noise for high-density perpendicular recording

In this paper, specific issues related to high-density perpendicular magnetic recording processes, such as transition noise properties and cross-track correlation lengths, were investigated with the help of micromagnetic analysis. The effects of media parameters were taken into consideration, including intergranular exchange coupling, and exchange distribution, irregular grain shapes, magnetization saturation distribution, and anisotropy distribution. The micromagnetic simulation results showed that the effect of anisotropy distribution on transition noise is more significant than magnetization saturation distribution, and it is crucial to reduce this effect to achieve a high signal-to-noise ratio. Additionally, a new method to further estimate the partial erasure threshold was proposed to approximate the partial erasure effects, and the relation between the microtrack jitter and total track jitter was investigated.     

Objective acoustic voice-quality parameters in the computer phonetogram

A phonetogram is a plot of the dynamic range of the voice as a function of fundamental frequency. Traditionally, the phonetogram only records the sound-pressure level (SPL) of the threshold of phonation and the upper limit in SPL the voice can reach with sustained phonation as a function of the fundamental frequency (F₀). In this study, the phonetogram is extended by including acoustic voice-quality parameters. Three additional parameters are tested: jitter, shimmer, and crest factor. For each individual voice, the variation in the three parameters is evaluated over the entire phonetogram area. By averaging individual phonetograms, standard or norm phonetograms are obtained revealing general patterns in voice-quality variation. These patterns reflect the complex relations between F₀, SPL, and the acoustic voice-quality parameters just mentioned. Jitter and shimmer distributions over the phonetogram show that large variations in perturbation values can be expected when production conditions are altered. Highest perturbation values are found for the low F₀ and low SPL phonations. For all voices, a gradual decrease of the crest factor is found with increasing F₀, reflecting the degrading of spectral complexity with F₀. The crest-factor parameter can also be used to mark those areas in the phonetogram where the fundamental dominates the waveform and where flow control is the main SPL regulating mechanism in voice production. The strong quality variations within the phonetogram stress the need for accurate control of F₀ and SPL in objective voice-quality measurement.     

Characterization of heat-assisted magnetic probe recording on CoNi/Pt multilayers

A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. In this work, field emission current from a scanning tunneling microscope (STM) tip is used as the heating source. Pulse voltages of 2–7 V were applied to a CoNi/Pt multilayered film fabricated on either bare silicon or oxidized silicon substrates. Different types of Ir/Pt and W STM tips were used in the experiment. The results show that thermally recorded magnetic marks are formed with a nearly uniform mark size of 170 nm on the film fabricated on bare silicon substrate when the pulse voltage is above a threshold voltage. The mark size becomes 260 nm when they are written on the identical film fabricated on an oxidized silicon substrate. The threshold voltage depends on the material work function of the tip, with W having a threshold voltage about 1 V lower than Pt. A synthesized model, which contains the calculation of the emission current, the simulation of heat transfer during heating, and the study of magnetic domain formation, was introduced to explain experimental results. The simulation agrees well with the experiments.     

含吲哚核端基多甲川菁染料的合成及性能

我们曾合成了具有桥环的硫三碳菁及多甲川苯乙烯菁,并测定了光学性能。本文报道吲哚环为端基的桥链三碳菁和四甲川苯乙烯菁的合成及在有机溶剂中电子吸收光谱及溶解性能的测定。所用仪器同前,7种多甲川菁染料的合成反应如下:     

Effects of BaCl_2 on slow vacuolar ion channels on radish by patch-clamp

Effects of BaCl2 on slow vacuolar ion channels on radish by patch-clamp YANG Pin (杨 频) & ZHANG Liping (张丽平) Institute of Molecular Science, Shanxi University, Taiyuan 030006, China Correspondence should be addressed to Yang Pin (email: yangpin@sxu.edu.cn)     

Hexagonal Ferrites from Melts and Aqueous Solutions,Magnetic Recording Materials

Owing to their particular crystallographic properties, ferrimagnetic hexagonal ferrites exhibit a far greater coercive force than the conventional magnetic pigments. They therefore appear to be suitable for use in magnetic information storage procedures, some of which are novel and are at the development stage. Thus, magnetic tapes of high coercive force containing barium ferrite could be used as master tapes for copying magnetic information or for producing forgery-proof magnetic cards, if magnetic heads having high-order write fields were successfully developed. Moreover, platelet-like ferrite pigments in which the preferred direction of magnetic orientation is perpendicular to the plane of the platelet are of great interest for perpendicular magnetic recording. In this progress report, the crystal structures, magnetic characteristics of hexagonal ferrites, and chemical processes for their production are discussed. In particular, reactions in salt melts or under hydrothermal conditions produce finely divided pigments whose particles have a pronounced hexagonal, plate-like habit, a narrow particle size distribution, and advantageous magnetic properties. The magnetic properties of the pigments crystallized from salt melts may be adjusted by cation exchange.