The main objective of the present work was to formulate and optimize a microparticulate sustained release drug delivery system of isoniazid by using a novel, alkaline extracted ispaghula husk as a polymer. Isoniazid microspheres of alkaline extracted ispaghula husk were prepared by emulsification internal ionic gelation method. Results of preliminary trials indicated that the polymer concentration, cross-linking agent and stirring speed had a noticeable effect on size and surface morphology. A four-factor three-level Box-Behnken design was employed to study the effect of independent variables on dependent variables. The particle size and entrapment efficiency varied from 30.75 to 61.78 µm and 62.27% to 85.80% respectively, depending on the polymer concentration, concentration of cross-linker and stirring speed. Optimized microspheres batch based on point prediction tool of design software exhibited 83.43% drug entrapment and 51.53 µm particle size with 97.80% and 96.37% validity, respectively at the following conditions: sodium alginate (3.55% w/v), alkaline extracted ispaghula husk (3.60% w/v), cross-linker concentration (7.82% w/v), and stirring speed (1200 rpm). The optimized formulation showed controlled drug release for more than 12 hours. The drug release followed Higuchi kinetics via a non-Fickian diffusion. 相似文献
In our current research, sucrose palmitate (SP) was applied as a possible permeation enhancer for buccal use. This route of administration is a novelty as there is no literature on the use of SP in buccal mucoadhesive films. Films containing SP were prepared at different temperatures, with different concentrations of SP and different lengths of hydroxypropyl methylcellulose (HPMC) chains. The mechanical, structural, and in vitro mucoadhesive properties of films containing SP were investigated. Tensile strength and mucoadhesive force were measured with a device and software developed in our Institute. Positron annihilation lifetime spectroscopy (PALS) and X-ray powder diffractometry (XRPD) were applied for the structure analysis of the films. Mucoadhesive work was calculated in two ways: from the measured contact angle and compared with direct mucoadhesive work, which measured mucoadhesive force, which is direct mucoadhesion work. These results correlate linearly with a correlation coefficient of 0.98. It is also novel because it is a new method for the determination of mucoadhesive work. 相似文献
Thiolation of polymers is one of the most appropriate approaches to impart higher mechanical strength and mucoadhesion. Thiol modification of gum karaya and gum acacia was carried out by esterification with 80% thioglycolic acid. FTIR, DSC and XRD confirmed the completion of thiolation reaction. Anticancer potential of developed thiomer was studied on cervical cancer cell lines (HeLa) and more than 60% of human cervical cell lines (HeLa) were inhibited at concentration of 5 µg/100 µL. Immobilized thiol groups were found to be 0.8511 mmol/g as determined by Ellman’s method. Cytotoxicity studies on L929 fibroblast cell lines indicated thiomers were biocompatible. Bilayered tablets were prepared using Ivabradine hydrochloride as the model drug and synthesized thiolated gums as mucoadhesive polymer. Tablets prepared using thiolated polymers in combination showed more swelling, mucoadhesion and residence time as compared to unmodified gums. Thiol modification controlled the release of the drug for 24 h and enhanced permeation of the drug up to 3 fold through porcine buccal mucosa as compared to tablets with unmodified gums. Thiolated polymer showed increased mucoadhesion and permeation, anticancer potential, controlled release and thus can be utilized as a novel excipient in formulation development. 相似文献
Mucoadhesive polymeric films have been prepared based on blends of chitosan and hydroxyethylcellulose. The blends have been characterized by IR spectroscopy, DSC, WAXD, TGA, SEM, and mechanical testing. It is demonstrated that the mechanical properties of chitosan are improved significantly upon blending with hydroxyethylcellulose. An increase in hydroxyethylcellulose content in the blends makes the materials more elastic. The thermal treatment of the blends at 100 degrees C leads to partial cross-linking of the polymers and formation of water-insoluble but swellable materials. The adhesion of the films towards porcine buccal mucosa decreases with increasing hydroxyethylcellulose content in the blends. 相似文献
Oral administration of actives is the most desired form of delivery, but the formulations need to overcome a variety of barriers including the intestinal mucus. This feature article summarizes the developments from the past 2–3 years in this context focusing on polymer‐based formulations. The progress in assembling mucopenetrating nanoparticles is outlined considering coatings using noninteracting polymers as well as virus‐like particles and charge‐shifting particles. Next, polymers and their modification to enhance mucoadhesion are discussed, followed by providing examples of double‐encapsulation systems that aim to combine mucopenetration with mucoadhesion in the same formulation. Finally, a short outlook is provided highlighting a few of the most pressing challenges to address. 相似文献
Mucoadhesion is the ability of materials to adhere to mucosal membranes in the human body and provide a temporary retention. This property has been widely used to develop polymeric dosage forms for buccal, oral, nasal, ocular and vaginal drug delivery. Excellent mucoadhesive properties are typical for hydrophilic polymers possessing charged groups and/or non-ionic functional groups capable of forming hydrogen bonds with mucosal surfaces. This feature article considers recent advances in the study of mucoadhesion and mucoadhesive polymers. It provides an overview on the structure of mucosal membranes, properties of mucus gels and the nature of mucoadhesion. It describes the most common methods to evaluate mucoadhesive properties of various dosage forms and discusses the main classes of mucoadhesives. 相似文献
Although oral is the preferred route of administration of pharmaceutical formulations, the long‐standing challenge for medically active compounds to efficiently cross the mucus layer barrier limits its wider applicability. Efforts in nanomedicine to overcome this hurdle consider mucoadhesive and mucopenetrating drug carriers by selectively designing (macromolecular) building blocks. This review highlights and critically discusses recent strategies developed in this context including poly(ethylene glycol)‐based modifications, cationic and thiolated polymers, as well as particles with high charge density, zeta‐potential shifting ability, or mucolytic properties. The latest advances in ex vivo test platforms are also reviewed. 相似文献
Mucoadhesive NP drug carriers have attracted substantial interest as a potential treatment for anterior eye diseases. NPs composed of PLA‐Dex surface functionalized with a mucoadhesive ligand, PBA, were developed as drug carriers with particle sizes ranging from 25 to 28 nm. Using CycA as a model drug, we showed that NPs encapsulated up to 13.7 wt% CycA and exhibited sustained release for up to 5 d in vitro at a clinically relevant dose. We fine‐tuned the PBA density on the NP surface to maximize the mucin‐NP interaction without compromising the particle stability in vitro. This block copolymer conjugate may be useful to improve the bioavailability of topical formulations.
In this study the interactions between a cationic polymer and an anionic cyclodextrin were investigated. The system has the potential for use in a sustained release dosage forms for use on mucous membranes. As mucous membranes are negatively charged the objective of this study was to investigate whether a drug delivery system based on a cationic polymer and an anionic cyclodextrin would be more mucoadhesive than a system containing a cationic polymer and a neutral cyclodextrin. For this purpose the cationic polymer hexadimethrine bromide (HDMBr) and anionic sulfobutylether -cyclodextrin (SBECD) were utilized as well as the neutral hydroxypropyl-cyclodextrin (HPCD). Triclosan was used as a model drug. The drug delivery system was formulated as a solution or semi-solid and its adhesion to porcine buccal mucosa and cation exchange media was measured. In addition the release of triclosan from the system was quantified. No difference was observed between the two systems when they were applied to the mucosal surface. However, the formulations showed improved adhesion, compared to the neutral cyclodextrin/drug delivery system, when they could also reach the underlying surface of the excised tissue. The drug delivery system was much better retained on the cation exchange media than the uncharged system. Significant interactions were observed between the negatively charged cyclodextrin and the positively charged polymer. The results indicate that the interactions could be used to obtain a mucoadhesive sustained drug delivery system under certain circumstances. The positive charge of HDMBr did not have the expected effect on the buccal mucosa and it can be concluded that although a positive charge is likely to promote mucoadhesion, other attributes of polymers, such as molecular weight and viscosity, may have equally beneficial effect. 相似文献