Highly Proton-Conductive Zinc Metal-Organic Framework Based On Nickel(II) Porphyrinylphosphonate

The design of new solid-state proton-conducting materials is a great challenge for chemistry and materials science. Herein, a new anionic porphyrinylphosphonate-based MOF ( IPCE-1Ni ), which involves dimethylammonium (DMA) cations for charge compensation, is reported. As a result of its unique structure, IPCE-1Ni exhibits one of the highest value of the proton conductivity among reported proton-conducting MOF materials based on porphyrins (1.55×10⁻³ S cm⁻¹ at 75 °C and 80 % relative humidity).     

Ageing of wet-synthesized oxide powders

Wet chemical synthesis of precursor oxide ceramics is a method to obtain small particulate powders. Such powders are far more prone to ageing in air than more traditional precursors. Thermogravimetric analysis is used to highlight the species responsible for the ageing of ceramic precursors. Indeed water and carbon dioxide are observed to evolve from aged powders. Ceramics obtained from aged precursors can reach a very low final density with respect to the theoretical value. A large degree of the original sintering properties can be recovered after washing the aged powders with ethanol in a basic medium.     

ZnS and ZnSe Nanoparticles via Solid-State and Solution Thermolysis of Zinc Silylchalcogenolate Complexes

The thermolysis of the zinc trimethylsilylchalcogenolate complexes (N,N′-tmeda)Zn(ESiMe₃)₂ (E = S, 1; E = Se, 2) and (3,5-Me₂-C₅H₃N)₂Zn(ESiMe₃)₂ (E = S, 3; E = Se, 4) has been investigated. Solid-state thermal decomposition of complexes 1–4 above 250°C results in the formation of hexagonal ZnS and cubic ZnSe, respectively, via the liberation of TMEDA (1–2) or 3,5-lutidine (3–4) and E(SiMe₃)₂. Solid-state or solution thermolysis of these complexes up to 200°C produces nanocrystalline ZnS and ZnSe materials whose surface is protected by either coordinated TMEDA or 3,5-lutidine ligands. The progress of the step-wise solid-state decomposition of these complexes was monitored by thermogravimetric and single differential thermal analysis and volatile decomposition products in both solution and solid-state experiments were identified by GC/MS.Dedicated to Professor Brian F. G. Johnson on the occasion of his retirement.     

A Study of Amorphous Precursors for PbZrO3-PbTiO3 Based Ceramic Materials

Amorphous precursors for PbZrO₃ and PbTiO₃ ceramics were prepared from lead acetate and the transition metaln-propoxide inn-propanol orn-butoxide inn-butanol and hydrolysed with an excess of water. According to GLC and TGA/EGA analyses, the type of alkoxide group influences distinctly the structure of heterometallic precursors, i.e., oxo or acetate bridging, and the amounts of hydroxyl and organic groups bound to the metal network. The local environments of metal atoms in the amorphous precursors were also studied by EXAFS. The analysis reveals that in Pb−Zr precursors alkoxide groups modify the coordination spheres of the zirconium atoms. Conversely, local environments of both lead and titanium atoms within the analysed range of 3.4 A depend weakly on the type of alkoxide used.     

Synthesis of Phosphaformamidines and Phosphaformamidinates

A large‐scale synthetic route to a variety of phosphaformamidines and phosphaformamidinates, a type of derivative that was not accessible by the methods previously known for preparing phosphaamidines and phosphaamidinates, is reported. Thermally stable ethyl N‐arylformimidates 1 (ArN?CH(OEt), Ar=2,4,6‐(Me)₃Ph or 2,6‐(iPr)₂Ph) readily reacted with lithium dialkyl‐ and diarylphosphanides to afford the corresponding N‐aryl phosphaformamidines in 80 and 60 % yield, respectively, whereas with lithium (aryl)(silyl)phosphanide, the N‐aryl‐N‐silylphosphaformamidine (60 % yield) was obtained. Addition of primary lithium arylphosphanides to 1 followed by addition of a stoichiometric amount of nBuLi gave rise to the respective phosphaformamidinates (70–88 % yield). Methanolysis of the products afforded the N‐aryl‐N‐hydrogenophosphaformamidines (90–95 % yield). The solid‐state structure of one of the phosphaformamidinates is also presented.     

SXI route to mesostructured materials from Fau and Beta zeolite precursors: A comparative study of their assembly behaviors in extremely acidic media

Mesoporous molecular sieves were synthesized from Beta and Fau zeolite precursors through S⁺X⁻I⁺ route under extremely acidic conditions in parallel (designated as M_Beta and M_Fau, respectively). The textural properties of M_Fau were different from its M_Beta counterpart but resembled normal MCM-41 silica from TEOS. Al content in M_Beta was almost equivalent to that in the initial Beta zeolite precursors, whereas only trace Al species was present in M_Fau from elemental analysis results. The hydrothermal stability of M_Beta after post-synthesis ammonia treatment was considerably improved compared with normal MCM-41 aluminosilicates, whereas the M_Fau after the same procedure was as unstable as normal MCM-41 silica. Thus, the assembly behaviors of Beta and Fau zeolite precursors were comparatively studied based on these results. The microstructure of Fau zeolite precursors were degraded by the extremely acidic condition, and Al species was dissolved into the synthesis mixture. However, Beta zeolite precursors survived the chemical attack of extremely acidic media and were incorporated into mesostructured framework as primary building units.     

A Biokinetic Model to Describe Consequences of Inhibition/Stimulation in DNA-Proofreading and -Repair,Part 2. Calibration of the Model

Summary.  A biokinetic model has been developed to describe the mathematical consequences of inhibition, respectively stimulation of proofreading. According to data reported in the literature, a first approximative calibration of the model has been carried out in an attempt to make it both: practically applicable and comparable with experimental data and clinical facts. The model is open for further improvements and adjustable according to results of further researches via the parameters chosen. In a first test of the model it is shown that it does well reflect the results described in the literature upon proof-reading-inhibition and its consequences, i.e., the reduction of replication-fidelity (→ exponential increase of malignant cells with time). As a further result it is shown that the model also does well describe in its kinetic approach opposite effects as, e.g., a reduction of wrong genetic information by classical cancer-therapies like chemotherapy and surgergy. The system is orientated towards known biochemical relations and chemical similarities together with a discussion of the potential chance which offer special combinations of chemically identifyable substances (like nucleotides’ precursors or effector-molecules contained in low-molecular-human-placenta-extracts as an alternative to umbilical cords’-blood/cells) as stimulators of the enzymatic proof-reading- and -repair-machinery. E-mail: Haschke.H@isovolta.com Received January 20, 2002; accepted (revised) June 26, 2002     

Cu-Mg/Al复合氧化物催化碳颗粒物燃烧性能的研究

恒定二价与三价阳离子比为3(nM2+/nM3+=3),采用共沉淀法制备不同Cu含量的系列水滑石前驱物, 800 ℃焙烧4 h形成复合氧化物(CuO质量百分数分别为0％、5％、10％、15％、20％、30％、40％)用作柴油车排放碳颗粒物燃烧的催化剂,并采用XRD、BET、TG-DSC、FT-IR、TPR等表征手段研究了Cu、Mg含量对材料前驱物物化性能的影响及对其衍生复合氧化物催化碳颗粒物燃烧性能的影响．结果表明,Cu、Mg含量对材料的热稳定性、比表面和催化氧化活性有显著的影响. Mg有助于提高催化剂的热稳定性; Cu含量增加,催化剂比表面下降,但比表面不是影响催化剂活性的主要因素. CuO含量为15％时,催化剂具有最好的催化活性和稳定性,碳颗粒物的起燃温度(T10)和半转化温度(T50)分别为336 ℃和409 ℃.在CuO含量≤30％时可以形成结构完整的水滑石前驱物, CuO含量为40％时出现Cu(OH)2杂相; CuO含量< 20％时,经高温焙烧可得到均匀的复合氧化物, CuO含量≥20％时出现CuO偏析． TPR结果表明焙烧温度和复合氧化物的组成决定了材料的可还原性能．     

用草酸胍制备钴酸盐尖晶石

本文采用先驱物法合成钴酸盐尖晶石MCo₂O₄(M=Zn,Ni,Cu,Mg,Cd,Mn)。以草酸胍作为沉淀剂，在溶液中以共沉淀的方法合成草酸盐先驱物。采用热分析(TG和DTA)、化学元素分析、红外光谱等手段对先驱物进行分析表征。通过红外光谱、X射线粉末衍射、扫描电镜对产物进行表征。产物的平均粒度范围在3.5～8.8 μm之间。