Efficient microwave induced direct α-halogenation of carbonyl compounds

A novel and direct method for the synthesis of α-halocarbonyl compounds using sequential treatment of carbonyl compounds with [hydroxy(tosyloxy)iodo]benzene followed by magnesium halides under solvent-free microwave irradiation conditions is described.     

White and Red Organic Light Emitting Materials

Derivatives of 2,3-(1,4-dialkoxyaceno)norbornadiene underwent ring-opening metathesis polymerization (ROMP) upon the catalysis of a ruthenium complex to afford the corresponding polymers. The polymeric materials containing anthracene chromophores emit white electro-luminescence, which can be fabricated into light-emitting diodes (LED). The broad emission band is composed of a blue emission from anthracene and a red emission from aggregates. A single layer device, ITO/polymer/Ca/Al, can be turned on at 7V and exhibits maximum intensity 427 cd/m2 at 15 V. A double layer device, ITO/polymer/TPBI/Mg:Ag (TPBI = (2,2′,2"-(1,3,5-benzenetriyl)-tris(1-phenyl-1H-benzimidazole)) displayed blue light with turn-on voltage 6 V and maximal intensity 930 cd/m2 at 15 V.Derivatives of bisindolylmaleimide were found to form amorphous solid films which exhibit intensive red luminescence. The property of forming glasses can be ascribed to the nonplanar geometry of these molecules. LED devices were fabricated by a layer of pure dye sandwiched between two charge transporting films. The yellow emission spectrum of the devices utilizing Alq (tris(8-hydoxyquinolinato)aluminum) contains a green component from Alq. Pure red emissions can be achieved by replacing Alq with TPBI. Typical devices can be turned on at ～3 V with maximal intensity 2000 cd/m2. White color devices are under current investigation, in which the green Alq layer is replaced by its blue derivative (bis(2-methyl-8-hydoxyquinolinato)(phenolato)aluminum).     

Synthesis and Structure of Novel Organocycloborates

A series of α,ω‐boryl(bromo)alkanes of the general formula R₂B? (CH₂)_n? Br (n=3, 4, 5, 6) was obtained in high yield following a standard hydroboration protocol. Upon treatment with Mg turnings and formation of the respective Grignard species, all alkanes with n=4 to 6 underwent an unprecedented boron‐centered cyclisation reaction with formation of boratacyclopentanes, ‐hexanes, and ‐heptanes, respectively. All new compounds were isolated in high yields as colourless, crystalline materials and characterised in solution by multinuclear NMR spectroscopy. Four representative examples were chosen for X‐ray diffraction studies, thus providing the first structurally characterised ring systems of that size at a tetraalkyl borate centre.     

MgO在Mg-hBN体系中对合成cBN晶体的影响

 以金属镁粉为触媒，以六角氮化硼为原料，其中加入适量比例的氧化镁，在国产六面顶压机上，在约5.0 GPa压力、1 500～1 800 K温度条件下，合成出了颜色均匀、晶形完整的黄色立方氮化硼单晶体。实验结果表明，在Mg-hBN体系中，氧化镁对合成cBN晶体的颜色及合成温度有很大的影响。     

Diagramme polythermique du systeme ternaire H2O—Al(NO3)3—Mg(NO3)2

The solid—liquid equilibria of the ternary system H₂O—Al(NO₃)₃—Mg(NO₃)₂ were studied at –30, –20, –10 and 0°C by using a synthetic method which allows to detemine all the characteristic points of isothermal sections. The stable solid phases which appear are respectively: ice, Al(NO₃)₃·9H₂O, Mg(NO₃)₂·9H₂O and Mg(NO₃)₂·6H₂O. Neither double salts nor mixed crystals are observed in the temperature and composition field studied. Polytherm diagram layout show two invariant transformations correspond with an eutectic point and a peritectic point.This revised version was published online in November 2005 with corrections to the Cover Date.     

Alternating copolyfluorenevinyles with polynuclear aromatic moieties: Synthesis,photophysics, and electroluminescence

Three new copolymers, namely poly(fluorenevinylene‐alt‐naphthalenevinylene) ( N ), poly(fluorenevinylene‐alt‐anthracenevinylene) ( A ) and poly(fluorenevinylene‐alt‐pyrenevinylene) ( P ), were synthesized by Heck coupling of 9,9‐dihexyl‐2, 7‐divinylfluorene with a polynuclear aromatic dibromide. The 9,10‐disubstituted anthracene was obtained exclusively for A while N and P were obtained as a mixture of two isomers with predominant the 1,4‐disubstituted naphthalene and 1,8‐disubstituted pyrene, respectively. The polymers were soluble in common organic solvents and decomposed above 370 °C. Their glass transition temperature increased from 58 to 110 °C by increasing the number of the phenyl rings of the polynuclear aromatic moiety. Rather high‐efficiency blue and blue‐greenish photoluminescence (PL) of these copolymers in solution was largely decreased in their films, indicating the presence of concentration quenching in the solid state. The OLED using these polymers demonstrated green EL in the case of copolymers N and A , and red EL in the P derivative with η_EL = 0.26–0.31%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4661–4670, 2007     

Synthesis of poly(p‐phenylene sulfide) from bis(4‐bromophenyl) disulfide

Improved reaction conditions for the preparation of poly(p‐phenylene sulfide) (PPS) directly from bis(4‐bromophenyl) disulfide (BBD) have been established. Heating BBD with magnesium metal afforded only a low molecular weight polymer. PPS with a melting temperature around 280 °C was obtained from BBD in the presence of sodium carbonate or zinc metal. The best results were obtained with the addition of a catalytic amount of KI to the zinc–BBD mixture. Polymers prepared by the above methods are semicrystalline and dissolve in 1‐chloronaphthalene and have properties comparable to commercial PPS. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 900–904, 2006     

冲击波处理的结晶MgO的化学分析正电子谱研究

冲击波处理的结晶ＭｇＯ的化学分析正电子谱研究＊张菊郑小明（杭州大学催化研究所，杭州３１００２８）常志向（抚顺石油化工研究院，抚顺１１３００１）关键词冲击波，化学分析正电子谱，结晶氧化镁，丁烯，脱氢冲击波是在介质中以超音速传播的压力脉冲．气体中的冲击波...     

A microcalorimetric study of the association of hexacyanoferrate(II) ions with calcium and magnesium ions in aqueous solution

Using flow microcalorimetry, the ion association reaction M²⁺(aq)+Fe(CN) ₆ ^4– (aq)=MFe(CN) ₆ ^2– (aq) (M=Ca, Mg) has been studied at 25°C over the ionic strength range 0.02 to 0.08 mol-dm^–3. Analyses of the data to obtain H^o, the enthalpy change at infinite dilution, are described. The value obtained for H^o is sensitive to the kind of functions used to correct for non-ideal behavior.     

2-三氰基乙烯基蒽及其旋转异构体的量子化学研究

用量子化学从头算方法 ,在RHF/STO - 3G水平上 ,对 2_三氰基乙烯基蒽 (2_TCVA)分子进行了理论计算 ,优化得到了它的平衡几何构型 ,并计算了它的谐振动频率 .结果表明 :2_TCVA存在两种旋转异构体 :2_TCVA(1)和 2_TCVA(2 ) ,2_TCVA(2 )的总能量比 2_TCVA(1)的略高 .在PM3/CIS水平上计算了它们的电子光谱 ,得到了由基态到各激发态的垂直跃迁能和相应的振子强度 .研究表明 :2_TCVA(1)和 2_TCVA(2 )的强度最大的吸收波长分别为 2 4 9.72nm和 2 89.4 1nm ,2_TCVA(2 )的强度最大的吸收波长比 2_TCVA(1)的要长 .计算结果与实验结果符合得较好