New poly(butylene succinate)/layered silicate nanocomposites. II. Effect of organically modified layered silicates on structure,properties, melt rheology,and biodegradability

A series of new poly(butylene succinate) (PBS)/layered silicate nanocomposites were prepared successfully by simple melt extrusion of PBS and organically modified layered silicates (OMLS). Three different types of OMLS were used for the preparation of nanocomposites: two functionalized ammonium salts modified montmorillonite and a phosphonium salt modified saponite. The structure of the nanocomposites in the nanometer scale was characterized with wide-angle X-ray diffraction and transmission electron microscopic observations. With three different types of layered silicates modified with three different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, materials properties, melt rheological behavior, and biodegradability. Interestingly, all these nanocomposites exhibited concurrent improvements of material properties when compared with pure PBS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3160–3172, 2003     

Isothermal crystallization kinetics of poly(3‐hydroxybutyrate)/layered double hydroxide nanocomposites

Poly(3‐hydroxybutyrate) (PHB)/layered double hydroxides (LDHs) nanocomposites were prepared by mixing PHB and poly(ethylene glycol) phosphonates (PEOPAs)‐modified LDH (PMLDH) in chloroform solution. Both X‐ray diffraction data and TEM micrographs of PHB/PMLDH nanocomposites indicate that the PMLDHs are randomly dispersed and exfoliated into the PHB matrix. In this study, the effect of PMLDH on the isothermal crystallization behavior of PHB was investigated using a differential scanning calorimeter (DSC) and polarized optical microscopy. Isothermal crystallization results of PHB/PMLDH nanocomposites show that the addition of 2 wt % PMLDH into PHB induced more heterogeneous nucleation in the crystallization significantly increasing the crystallization rate and reducing their activation energy. By adding more PMLDH into the PHB probably causes more steric hindrance of the diffusion of PHB, reducing the transportation ability of polymer chains during crystallization, thus increasing the activation energy. The correlation among crystallization kinetics, melting behavior and crystalline structure of PHB/PMLDH nanocomposites can also be discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3337–3347, 2006     

Synthese und Eigenschaften von Sr3Mo1.5Zn0.5O7‐δ, einer Phase mit perowskitverwandter Schichtstruktur

Synthesis and Properties of the Layered Perovskite Phase Sr₃Mo_1.5Zn_0.5O_7‐δ The new layered perovskite phase Sr₃Mo_1.5Zn_0.5O_7‐δ was synthesized by solid state reaction using a Zn/ZnO oxygen buffer. The crystal structure was refined from X‐ray powder pattern by the Rietveld method. The compound crystallizes tetragonal in the space group I4/mmm (no. 139) with the lattice parameters a = 3.9631(3) Å, c = 20.583(1) Å. An oxygen deficiency corresponding to δ ≈ 0.25 was determinated, indicating the presence of molybdenum in mixed valence (Mo⁴⁺ and Mo⁶⁺).     

复合多层介质在可变温度和集中荷载作用下的位移和应力

研究了多层介质中的热弹性位移和应力.多层介质具有不同厚度,各层又具有不同的弹性性质,最上层表面上作用热荷载和集中荷载.假设各层分别是均匀、各向同性弹性材料,各层相关的位移分量是轴对称的,对称轴为各层表面的垂线.因此,各层应力函数满足无体力的单一方程.利用积分变换法求解了该方程,对由任意多个层数构造的多层介质,给出了其相应层数基础热弹性位移和应力的解析表达式.并对3层介质和4层介质时的数值结果进行了比较.     

Digital volume gratings

An optical element constructed by stacking a set of binary-phase grating sheets can simulate the functions of optically recorded volume gratings. Our electromagnetic numerical study also shows that if one of the grating sheets is replaced by another one with different grating period, power spectrum of the diffracted wave changes completely with extra diffraction orders. This property will claim strong advantage in security document applications. Analysis of alignment error reveals interesting phenomena concerning to how misalignment affects diffraction efficiency.     

周期性分层介质高反射区范围的分析与估计

对于具有周期单元的分层介质材料高反射区的波长范围，提供一种简明的估计分析方法.基于Floquet定理，分析了有限周期单元分层介质的光子带隙特性，给出分层介质的高反射区波长范围.讨论了分层介质高反射区和周期单元禁带之间的关系.计算表明，高反射区和周期单元禁带的中心波长彼此一致.并且，随着分层介质周期单元数的增多，高反射区的深度和带宽就越接近于周期单元禁带的深度和宽度.最后，讨论周期分层介质的光子带隙特性与入射角及其与极化的变化关系. 关键词： 分层介质 带隙特性 周期单元 高反射区     

Application of the finite Hankel transform to a diffusion problem without azimuthal symmetry

The problem treated in this paper concerns calculating the evolution of the pressure in a single-phase, slightly compressible fluid in a porous medium consisting of communicating layers. The fluid is produced through a point sink located on the side of an otherwise sealed cylindrical wellbore. This location of the sink causes the flow around the wellbore to be azimuthally asymmetric.The problem is solved through successive application of Laplace, finite Fourier and finite Hankel transforms. Although apparently straightforward, this approach leads to serious numerical difficulties. The published form of the inversion formula for the finite Hankel transform leads to inaccurate computation for the higher azimuthal modes even with 128 bit arithmetic. An alternative form is developed which enables accurate evaluation of the solution with the more practical 64 bit arithmetic. The technique for two-layer solution presented here can be directly extended to a problem with a larger number of communicating layers. This is the first instance of successful application of the finite Hankel transform to an azimuthally asymmetric diffusion problem.     

Photo-induced effect in the layered perovskite manganite La<Subscript>1.2</Subscript>Sr<Subscript>1.8</Subscript>Mn<Subscript>1.8</Subscript>Co<Subscript>0.2</Subscript>O<Subscript>7</Subscript>

It is helpful to study the photo-induced effect in the perovskite manganites not only for elucidating the mechanism of colossal magnetoresistance (CMR) effect but also for potential applications in technology. The laser-induced effect in the Co doping layered perovskite manganites La_1.2Sr_1.8Mn_1.8Co_0.2O₇, is studied in this paper and the obtained results are also compared with that gained in the Nd-doping manganites with cubic perovskite structure.     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

A Mossbauer study of the magnetic coupling in iron phosphorous trisulfides

The polycrystalline sample of layered compound FePS_3 has been investigated by using M?ssbauer spectroscopy (12K to 300K), magnetic susceptibility measurements, x-ray diffraction and FTIR spectroscopy. The antiferromagnetic order exists below T_N=120.5±1K. The M?ssbauer spectra below T_N indicate that the magnetization axis is perpendicular to the layer of FePS_3, and the divalent iron cations are in their high spin configurations. By fitting the hyperfine field parameters near the Néel temperature, we obtain information on the nature of magnetic interactions in the material. The results show that the magnetic coupling can be treated by the two-dimensional Ising model, and it can be interpreted on the basis of a crystal-field effect.