激光诱导间质肿瘤热疗的数值模拟和实验研究

本文在考虑生物组织物性动态变化的情况下建立了激光诱导间质肿瘤热疗(LITT)的物理数学模型,采用MonteCarlo方法数值模拟了LITT中激光能量在生物组织内的传输过程,基于Pennes生物传热方程和Arrhenius方程数值求解了组织内的温度分布和热损伤体积的变化,分析了热物性及血液灌注率的动态变化对LITT过程的影响,并与相应的离体实验结果进行了对比。数值模拟结果表明,组织的热物性及血液灌注率的动态变化对于热损伤体积的变化具有重要的影响。因此在激光诱导间质肿瘤热疗的数值模拟中应该考虑热物性及血液灌注率的动态变化以期为临床治疗方案的制定提供更为准确的依据。     

催化荧光法测定痕量草酸

在硫酸介质中 ,草酸能催化重铬酸钾氧化罗丹明B褪色 ,使体系荧光猝灭 ,建立了催化荧光法测定草酸的新方法。催化反应在 50℃水浴中进行 1 0min ,为假零级反应。测定草酸的线性范围为 0 4～ 1 2 0mg·L- 1 ,其回归方程为ΔF =8 42c(mg·L- 1 ) 3 81 ,r=0 9983 ,检出限为 0 1 6mg·L- 1 。试验了 30种共存物质的干扰情况。此法用于生物样品中草酸含量的测定 ,结果满意。     

Changes in the Laser-Induced Fluorescence Spectrum of Myocardium Tissue with Decrease in Its Viability

We investigated the laser-induced fluorescence spectra (LIF) of porcine cardiac tissues with different degrees of viability. The data obtained are compared with the results of routine histological investigations and also with the experiments performed with the use of fluorescent probes. It has been found with a high degree of reliability that the loss of the viability of the myocardium tissue leads to the alteration of its LIF spectra. This can be used for low-invasive rapid control of transplant viability in the process of its preparation and during surgery.     

催化荧光法测定痕量铜的研究

本文拟定了一个催化荧光法测定痕量铜的新方法,确定了该催化反应的速度方程式和反应级数。方法检测限达0.1ng Cu/ml,相对标准偏差为3.7％,具有较好的选择性,可不经分离直接用于头发样品中铜的测定,回收及对照实验结果令人满意。     

同步荧光法同时测定苯甲酸和水杨酸的研究

根据苯甲酸与水杨酸在酸性条件下荧光光谱出现的差异，用同步荧光法同时测定其混合物中二组份。苯甲酸及水杨酸的检测限分别为０．２４μｇ／ｍＬ和０．２５μｇ／ｍＬ相对标准偏差分别为１．３％和１．２％。方法用于商品杀菌腐剂中苯甲酸与水杨酸的同时测定，结果满意。     

Analytical applications of a differential technique in laser-induced fluorimetry: accurate and precise determination of uranium in concentrates and for designing microchemielectronic devices for on-line determination in processing industries

A novel instrumental technique for the direct, fast, accurate, and precise determination of uranium in concentrates and other U-rich materials (as well as to mineralized rocks) is presented. The proposed technique is an absolute methodology, based on the comparison of the fluorescence of the accurately known standard with a sample of similar but unknown concentration in the low operational range of the instrument (on same sample-dilution basis), by the use of H₃PO₄-NH₄H₂PO₄ as a fluorescence-enhancing reagent. The relative standard deviation of the proposed technique was 0.5-0.9% (n=9) at 18.1, 36.2, 61.2, and 99.6% U₃O₈. The proposed technique is suitable for the determination of uranium in samples arising from exploration projects, ores from mining operations, mill process samples, uranium ore concentrates leading to fuel fabrication as well as samples from environmental monitoring containing up to 100% uranium. The results are in good agreement with those obtained by titrimetric, gravimetric, and TBP extraction-H₂O₂ spectrophotometric methods. The precision of the technique is within the acceptable ‘pure geochemistry’ type of analysis (R.S.D. ∼ 1.0%) and is comparable even those obtained with titrimetric and gravimetric assay. The proposed differential technique coupled with flow injection may open up new advancement in instrumentation leading to design and development of microchemielectronic devices for direct on-line determination, more compatible with the tools of computer age as also to help in handling of radioactive solutions in chemical laboratories in uranium processing industries.     

Response Characteristics of Arsenic-Sensitive Bioreporters Expressing the gfp Reporter Gene

This paper describes the development of an analytical technique for arsenic analyses that is based on genetically-modified bioreporter bacteria bearing a gene encoding for the production of a green fluorescent protein (gfp). Upon exposure to arsenic (in the aqueous form of arsenite), the bioreporter production of the fluorescent reporter molecule is monitored spectroscopically. We compared the response measured as a function of time and concentration by steady-state fluorimetry (SSF) to that measured by epi-fluorescent microscopy (EFM). SSF is a bulk technique; as such it inherently yields less information, whereas EFM monitors the response of many individual cells simultaneously and data can be processed in terms of population averages or subpopulations. For the bioreporter strain used here, as well as for the literature we cite, the two techniques exhibit similar performance characteristics. The results presented here show that the EFM technique can compete with SSF and shows substantially more promise for future improvement; it is a matter of research interest to develop optimized methods of EFM image analysis and statistical data treatment. EFM is a conduit for understanding the dynamics of individual cell response vs. population response, which is not only a matter of research interest, but is also promising in the practical terms of developing micro-scale analysis.     

氧化藏红T褪色催化荧光法测定痕量钒

研究了在酸性介质中柠檬酸存在下，痕量钒（Ｖ）催化溴酸钾氧化藏红Ｔ的褪色反应及其动力学条件，建立了催化荧光测定痕量钒的新方法。催化反应在沸水浴中进行８ｍｉｎ，为假零级反应，反应的表观活化能力为９９．２１ｋＪ／ｍｏｌ，反应速度常数为０．１２／ｓ；该方法的检出限为２．２×１０＾－８ｇ／Ｌ；线性范围为０．２￣２．４μｇ／Ｌ研究了共存离子的影响，用于人发和煤灰中痕量钒的测定，结果令人满意。     

表面活性剂对铽—钛铁试剂体系纸上荧光的增敏作用及其应用

本文研究了9种表面活性剂对钛铁试剂体系纸上荧光法中Tb~(3+)特征荧光的增敏作用,并探讨了钛铁试剂-溴化十六烷基三甲胺体系纸上荧光法测定Tb~(3+)的最佳条件,Tb~(3+)的检测限为0.7ng。应用本方法成功地测定了中稀土分离富集物中Tb_4O_7的含量。     

FIA-fluorimetric determination of adrenaline in pharmaceutical formulations by oxidation with molecular oxygen

The fluorimetric determination of adrenaline is carried out in a continuous-flow assembly and by means of the molecular dissolved oxygen. The sample solution merges with an NaOH stream, then the resulting mixture is heated at 73 °C and led to the flow-cell of the fluorimeter. The flow-assembly is very simple and the procedure is quick (107 samples h^–1) reproducible (R.S.D. 0.6%), selective and suitable to be applied to determination of adrenaline in formulations. Calibrations graph are linear over the ranges 0.05–15 and 20–40 mgl^–1.