Hydrogen cycling induced diffraction peak broadening in C14 and C15 Laves phases

The diffraction peak broadening induced by hydrogen absorption-desorption cycling has been analyzed in four different Laves phase compounds with the C14 and C15 structures. The broadening is due to strain most probably originating from dislocations generated at the interface between the α and β hydride phases in connection with the cell volume difference between the two phases. It has been shown that it is strongly compound dependent. In the case of the C14 structure, the broadening is large and isotropic, and the latter can be related to the isotropy of the elastic constants of the metallic phase. The broadening is less for the compounds with the C15 structure, which can be related to a possibly softer lattice. Better ageing properties after long-term cycling are predicted for this crystal structure.     

Vibrational spectra and structure of zirconium and hafnium cyclopentadienyl hydrides

Raman and IR spectra (4000-50 cm^–1) of solid cyclopentadienyl zirconium and hafnium hydrides Cp₂MH₂, Cp₂MD₂, Cp₂Zr(H)X, and Cp₂Zr(D)X (Cp = ⁵-C₅H₅; M = Zr, Hf; X = Cl, Br) have been studied. The vibrational modes of MH groups, Cp-rings, and metal-ligand bonds are discussed and the band assignments are proposed. In the solid state, these complexes form polymers with linear hydride bridges of the M-H-M type. The force constants of the M-H and M-Cp bonds increase on going from Zr to Hf.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1604–1609, September, 1994.     

Specific features of the thermodynamics of activation in the LaNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> and CeNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> systems

Using heat conducting Tian—Calvet calorimetry and volumetric measurements, the first hydrogen absorption—desorption cycles in the LaNi₅-H₂ and CeNi₅-H₂ systems were studied. The pressure—composition isotherms were plotted, the equilibrium pressures of hydrogen along the absorption and desorption branches and in the region of hysteresis for different activation steps were determined, and the enthalpies of phase transitions α → β and β → α were calculated. The profiles of the heat evolution curves were analyzed. It was concluded that the mechanism of the reactions studied changes upon activation.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 134–139, January, 2005.     

Structural assignment of organotin hydrides containing the oxazoline ligand

A series of triorganotin hydrides and diorganotin dihydrides containing the optically active 2-(4-isopropyl-2-oxazolinyl)-5-phenyl ligand have been characterized by means of the multinuclear low-temperature NMR investigations, the results of which are discussed. In the corresponding organotin hydrides values of the ¹J(¹H-^117/119Sn) couplings appeared to be temperature dependent, supporting an axial/equatorial position of the hydrogen attached to the tin.     

Highly efficient redox isomerization of allylic alcohols at ambient temperature catalyzed by novel ruthenium-cyclopentadienyl complexes--new insight into the mechanism

A range of ruthenium cyclopentadienyl (Cp) complexes have been prepared and used for isomerization of allylic alcohols to the corresponding saturated carbonyl compounds. Complexes bearing CO ligands show higher activity than those with PPh3 ligands. The isomerization rate is highly affected by the substituents on the Cp ring. Tetra(phenyl)methyl-substituted catalysts rapidly isomerize allylic alcohols under very mild reaction conditions (ambient temperature) with short reaction times. Substituted allylic alcohols have been isomerized by employing Ru-Cp complexes. A study of the isomerization catalyzed by [Ru(Ph5Cp)(CO)2H] (14) indicates that the isomerization catalyzed by ruthenium hydrides partly follows a different mechanism than that of ruthenium halides activated by KOtBu. Furthermore, the lack of ketone exchange when the isomerization was performed in the presence of an unsaturated ketone (1 equiv), different from that obtained by dehydrogenation of the starting allylic alcohol, supports a mechanism in which the isomerization takes place within the coordination sphere of the ruthenium catalyst.     

K3MnH5, das erste salzartige Manganhydrid

K₃MnH₅, the First Salt-like Manganese Hydride K₃MnH₅ and K₃MnD₅ were synthesized by the reaction of potassium hydride (deuteride) with manganese powder under a hydrogen pressure above 3000 bar at 875 K. X-ray investigations on powdered samples and elastic neutron diffraction experiments on the deuterated compound at the time-of-flight spectrometer LAD in the temperature range 5–600 K led to the complete structure determination. The atomic arrangement is isotypic with that of Cs₃[CoCl₄]Cl (space group: 14/mcm, Z = 4). The structure of K₃MnH₅ contains isolated [MnH₄]^2?-tetrahedra and additional hydrogen ions which are exclusively coordinated by potassium cations. The magnetic susceptibilities show Curie-Weiss behaviour. At temperatures below 50 K there are obviously antiferromagnetic interactions.     

Low-temperature hydrodechlorination of 2,3-dichlorodibenzo-p-dioxin and chlorobenzene with hydrides catalyzed by transition metal compounds

Hydrodechlorination of chlorobcnzene by chemically bound hydrogen in the presence of transition metal compounds was studied. Alkali and alkaline earth metal hydrides (NaH, MgH₂, LiAlH₄, NaH(LiAlH₄)/12) were used as the sources of the chemically bound hydrogen. The effect of the natures of the hydride and of the transition metal on the activity was studied under comparable conditions. The Pd/C-NaH(LiAlH₄1/2 catalytic system was found to be the most active. This system made it possible to perform the quantitative dechlorination of 2,3-dichlorodibenzo-p-dioxin at 70 °C.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1391–1394, June, 1996.     

Nucleophilic de-coordination and electrophilic regeneration of "hemilabile" pincer-type complexes: formation of anionic dialkyl, diaryl, and dihydride Pt(II) complexes bearing no stabilizing pi-acceptors

Novel anionic dialkyl, diaryl, and dihydride platinum(II) complexes based on the new "long-arm" hemilabile PCN-type ligand C6H4[CH2P(tBu)2](CH2)2N(CH3)2 with the general formula Li+[Pt(PCN)(R)2]- (R=Me (4), Ph (6) and H (9)) were prepared by reaction of [Pt(PCN)(R)] complexes (obtained from the corresponding chlorides) with an equivalent of RLi, as a result of the opening of the chelate ring. Alkylating agents based on other metals produce less stable products. These anionic d8 complexes are thermally stable although they bear no stabilizing pi acceptors. They were characterized by 1H, 31P[1H], 13C, and 7Li NMR spectroscopy; complex 9 was also characterized by single crystal X-ray crystallography, showing that the Li+ ion is coordinated to the nitrogen atom of the open amine arm and to the hydride ligand (trans to the P atom) of a neighboring molecule (H--Li=2.15 A), resulting in a dimeric structure. Complexes 4 and 9 exhibit high nucleophilic reactivity, upon which the pincer complex is regenerated. Reaction of 4 with water, methyl iodide, and iodobenzene resulted in the neutral complex [Pt(PCN)(CH3)] (3) and methane, ethane, or toluene, respectively. Labeling studies indicate that the reaction proceeds by direct electrophilic attack on the metal center, rather than attack on the alkyl ligand. The anionic dihydride complex 9 reacted with water and methyl iodide to yield [Pt(PCN)(H)] (8) and H2 or methane, respectively.     

Synthese und Struktur von Li3RhH6, einem ternären Hydrid mit isolierten [RhH6]3−-Oktaedern

Synthesis and Structure of Li₃RhH₆ — a Ternary Hydride with Isolated [RhH₆]^3? Octahedra The ternary rhodium hydride Li₃RhH₆ was synthesized by the reaction of lithium hydride with rhodium under a hydrogen pressure of 80 bar. X-ray investigations on powdered samples and an elastic neutron diffraction experiment on the deuterated compound led to the complete structure determination (space group: Pnma, Z = 4). The atomic arrangement is isotypic to the Na₃RhH₆ structure type. The crystal structure contains isolated [RhH₆]^3? octahedra, which are separated by the lithium ions.