固相萃取-气相色谱-质谱分析肉样中盐酸克伦特罗的残留量

建立了固相萃取 气相色谱 质谱联机分析肉样中盐酸克伦特罗残留量的方法。对盐酸克伦特罗在C1 8和离子交换固相萃取柱上的保留行为进行了研究 ,发现不同浓度盐酸克伦特罗的固相萃取回收率在 75 %～ 95 %之间 ;肉样中的加标回收率在 70 %～ 83 % ;相对标准偏差在 4 .95 %～ 1 3 .4 % ;最低检出限为 1 μg kg。盐酸克伦特罗的硅烷化产物 ,采用选择离子的模式进行检测 ( 86、2 4 3、2 62、2 77) ,衍生物的峰面积与样品浓度在0 .0 0 2 5 2～ 2 .0 2mg L范围内呈良好的线性关系 ,线性回归系数大于 0 .9999。     

Effects of irradiation on trans fatty acids formation in ground beef

In order to give the consumer the assurance that meat processed by irradiation is a safe product, a great deal of research has been developed in the world. The effect of irradiation on the hygienic quality of meat and meat products is considered as related to the control of meat-borne parasites of humans; elimination of pathogens from fresh meat and poultry; and elimination of pathogens from processed meat. Lipid oxidation and associated changes are the major causes of the quality deterioration of meat during storage. Irradiation of lipids induces the production of free radicals, which react with oxygen, leading to the formation of carbonyls, responsible for alterations in food nutritional and sensorial characteristics. Trans fatty acids are present in ground beef and can also be formed during its processing. Interestingly, the trans fatty acids, due to their chemical and physical characteristics, show more resistance to the oxidizing process. This property motivated us to investigate the level of the trans fatty acids, as well as the level of oxidation in irradiated ground beef. Irradiation of ground beef was performed by gamma rays from a ⁶⁰Co source. The applied radiation doses were 0; 1.0; 2.0; 3.0; 4.0; 5.0; 6.0; 7.0 and 8.0 kGy. Lipid peroxidation in terms of TBA number and carbonyl content was monitored during storage. The sample characteristics and trans fatty acids composition were measured, following irradiation and after 60 and 90 days of storage at –10°C.     

Identification of irradiated foods by monitoring radiolytically produced hydrocarbons

Many countries allow the treatment of foods with low doses of ionizing radiation to reduce microbial and insect infestations, inhibit maturation, and extend shelf life. Therefore, a reliable method is needed to identify irradiated foods and to determine their compliance with respect to allowable absorbed radiation dose. Several approaches for the identification of irradiated foods have been developed such as measurement of radiolytic products, chemiluminescence, and thermoluminescence, and the use of electron spin resonance spectroscopy to measure free radicals trapped in bone. A method for the determination of radiolytically produced hydrocarbons was developed in our laboratory to evaluate the utility of monitoring these compounds as indicators of food irradiation. The method involves the extraction of the radiolytic hydrocarbons from foods and their quantitation by gas chromatography. Concentrations of the radiolytically produced hydrocarbons increased linearly with radiation doses ranging from 0 to 6 kGy. The limit of detection appears to be approximately 1 kGy. The method was found to be useful for the identification of gamma-irradiated foods such as shrimp, frog legs, pork, beef, and poultry. Results of the method evaluation studies of these food matrices as well as factors affecting hydrocarbon production and determination will be presented.     

Fast simultaneous determination of 23 veterinary drug residues in fish,poultry, and red meat by liquid chromatography/tandem mass spectrometry

The misuses of veterinary drugs can result in the accumulation of residues in food of animal origin that can make its way to the final consumer. Herein we describe a simple method for the accurate determination of beta-lactams, quinolones, sulphonamides, and tetracyclines in fish, poultry, and red meat. No extraction cartridges were used; instead, the extraction process consisted of the addition of an organic solvents, shaking, centrifugation, and dilution. An extensive validation process demonstrated an excellent linearity (R² ≥ 0.99) for 23-drug residues. The recovery of drugs in different matrices at two concentration levels (n = 6) was in the range of 82–119%. The method was proved to be repeatable and reproducible with intra/inter-day measurements (RSDs lower than 20%). The quantification limits of drug residues were in the range of 0.8 to 45.3 ug/kg, which is well below the maximum residue limits set by most regulatory authorities. This method was successfully applied to the routine analysis of 20 fish, poultry, and red meat samples (n = 60).     

Effectiveness of radiation processing in elimination of Campylobacter from poultry meat

Campylobacter, a common poultry intestine commensal, is a well known cause of human gastric illnesses across the globe. Consumption of contaminated poultry meat is a major cause of Campylobacter related infections. In the present study, radiation sensitivity of indigenous strains of C. jejuni and C. coli isolated from poultry was evaluated. The decimal reduction dose (D₁₀) values of different Campylobacter isolates at 0-4 °C in saline and blood broth were in the range of 0.120-0.210 kGy and 0.170-0.234 kGy, respectively. D₁₀ values in chicken meat homogenate for Campylobacter were in the range of 0.110-0.190 kGy. Chicken meat samples were inoculated with C. jejuni and exposed to gamma radiation to study the effectiveness of radiation treatment in elimination of Campylobacter. Radiation treatment with a dose of 1 kGy could achieve complete elimination of 10⁵ CFU of Campylobacter/g in poultry meat samples. No recovery of Campylobacter was observed, even after enrichment and selective plating in 1 kGy treated chicken meat samples stored at 4 °C up to 7 days. Present study shows that irradiation of poultry meat with 1 kGy can ensure safety of poultry meat.     

真空冷却过程中实验条件对真空冷却速率的影响

以熟肉为实验材料,对实验条件对真空冷却速率的影响进行了理论分析和实验研究。实验结果表明:真空室有效容积越小、真空泵抽速越高,则真空冷却时间就会越短;冷阱温度对真空冷却速率有着明显的影响;当真空室内的最终压力在0.4～0.61kPa变化时,熟肉的表面温度一直在0℃以上,其真空冷却的时间随着真空室内压力的升高而增加。而真空室内的最终压力在0.3kPa左右时,熟肉的表面温度在真空冷却过程会低于0℃。     

UFLC–MS/MS method for simultaneous determination of six lignans of Schisandra chinensis (Turcz.) Baill. in normal and insomniac rats brain microdialysates and homogenate samples: towards an in‐depth study for its sedative‐hypnotic activity

Schisandra chinensis (Turcz.) Baill., a traditional Chinese medicine, has been clinically used for the treatment of insomnia for centuries. The insomnia mechanism and the possible active ingredients of S. chinensis remain largely unknown. The objective of this study was to develop a method to detect its components which could pass through the blood brain barrier (BBB) by determining the brain microdialysate and brain tissue homogenate samples and then obtain the pharmacokinetic profile in brain for comprehensive understanding of its hypnotic clinical efficacy. Therefore, an efficient, sensitive and selective ultra fast liquid chromatography/tandem mass spectrometry method for the simultaneous determination of six sedative and hypnotic lignans (schisandrin, schisandrol B, schisantherin A, deoxyshisandrin, γ‐schisandrin and gomisin N) of Schisandra chinensis (Turcz.) Baill. in rat brain tissue homogenate and brain microdialysates has been developed and validated. The analysis was performed on a Shim‐pack XR‐ODS column (75 mm × 3.0 mm, 2.2 µm) using gradient elution with the mobile phase consisting of acetonitrile and 0.1% formic acid water. The method was validated in brain homogenate and microdialysate samples, which all showed good linearity over a wide concentration range (r² > 0.99), and the obtained lower limit of quantification was 0.1 ng · ml^?1 for the analytes in brain microdialysate samples. The intra‐ and inter‐day assay variability was less than 15% for all analytes. The study proved the six lignans, as sedative and hypnotic ingredients, could pass through the BBB with brain targeting, distributed mainly in the hypothalamus and possessed complete pharmacokinetics process in brain. The results also indicated that significant difference in pharmacokinetic parameters of the analytes was observed between two groups, while absorptions of these analytes in insomniac group were significantly better than those in normal group. Copyright © 2013 John Wiley & Sons, Ltd.     

Natural Polyphenols for the Preservation of Meat and Dairy Products

Food spoilage makes foods undesirable and unacceptable for human use. The preservation of food is essential for human survival, and different techniques were initially used to limit the growth of spoiling microbes, e.g., drying, heating, salting, or fermentation. Water activity, temperature, redox potential, preservatives, and competitive microorganisms are the most important approaches used in the preservation of food products. Preservative agents are generally classified into antimicrobial, antioxidant, and anti-browning agents. On the other hand, artificial preservatives (sorbate, sulfite, or nitrite) may cause serious health hazards such as hypersensitivity, asthma, neurological damage, hyperactivity, and cancer. Thus, consumers prefer natural food preservatives to synthetic ones, as they are considered safer. Polyphenols have potential uses as biopreservatives in the food industry, because their antimicrobial and antioxidant activities can increase the storage life of food products. The antioxidant capacity of polyphenols is mainly due to the inhibition of free radical formation. Moreover, the antimicrobial activity of plants and herbs is mainly attributed to the presence of phenolic compounds. Thus, incorporation of botanical extracts rich in polyphenols in perishable foods can be considered since no pure polyphenolic compounds are authorized as food preservatives. However, individual polyphenols can be screened in this regard. In conclusion, this review highlights the use of phenolic compounds or botanical extracts rich in polyphenols as preservative agents with special reference to meat and dairy products.     

Chitosan and Whey Protein Bio-Inks for 3D and 4D Printing Applications with Particular Focus on Food Industry

The application of chitosan (CS) and whey protein (WP) alone or in combination in 3D/4D printing has been well considered in previous studies. Although several excellent reviews on additive manufacturing discussed the properties and biomedical applications of CS and WP, there is a lack of a systemic review about CS and WP bio-inks for 3D/4D printing applications. Easily modified bio-ink with optimal printability is a key for additive manufacturing. CS, WP, and WP–CS complex hydrogel possess great potential in making bio-ink that can be broadly used for future 3D/4D printing, because CS is a functional polysaccharide with good biodegradability, biocompatibility, non-immunogenicity, and non-carcinogenicity, while CS–WP complex hydrogel has better printability and drug-delivery effectivity than WP hydrogel. The review summarizes the current advances of bio-ink preparation employing CS and/or WP to satisfy the requirements of 3D/4D printing and post-treatment of materials. The applications of CS/WP bio-ink mainly focus on 3D food printing with a few applications in cosmetics. The review also highlights the trends of CS/WP bio-inks as potential candidates in 4D printing. Some promising strategies for developing novel bio-inks based on CS and/or WP are introduced, aiming to provide new insights into the value-added development and commercial CS and WP utilization.     

LF-NMR和MRI对干制虾仁复水过程水分状态及品质变化的研究

采用低场核磁(LF-NMR)及其成像技术(MRI)研究干制虾仁在25℃复水过程中的水分含量、分布及状态变化,并通过线性回归分析不同复水时间干制虾仁的LF-NMR参数与质构特性及复水率的相关性。实验结果表明,干制虾仁复水过程中存在结合水、不可移动水和自由水3个组分峰,随着复水时间的增加,结合水无明显变化,而自由水、不易流动水含量增加,且自由度增加,流动性增大。LF-NMR参数(T_(22)、T_(23)、A_(22)、A_(23)和A_(Total))和硬度、咀嚼性、弹性、凝聚性以及复水率有极显著的相关性(R~2≥0.613),为干制虾仁复水过程中品质的快速无损预测提供了一种新方法。