直流磁控溅射一步法原位制备MgB2超导薄膜

用MgB2靶,控制直流磁控溅射工作在异常辉光放电或弧光放电状态,在SrTiO3衬底上原位一次性得到了MgB2超导薄膜,其起始转变温度为32K,零电阻温度为15K. 关键词： 高温超导体 超导薄膜 磁控溅射 二硼化镁     

基于LabVIEW的高温超导材料特性测试实验

高温超导体临界特性的测量是近代物理实验中最为经典的实验之一,本文通过使用GM制冷机,利用Lab-VIEW虚拟仪器软件和高性能采集卡,改进了传统的测量高温超导材料临界特性的实验装置.本测试系统不仅可以测量高温超导体在不同温度下的临界电流,还可以测量其失超传播特性.该实验对于学生了解超导体特性和培养严谨的科学作风十分有益.     

High-temperature expansions to fifteenth order

High-temperature series expansions of the susceptibility and second moment to 15th order are calculated for zero external field on the linear chain (LC), plane square (PSQ), simple cubic (SC), and body-centered cubic (BCC) lattices. Checks for specific models against pertinent work in the literature are detailed.     

石墨-六角氮化硼微晶混合物与水高压反应产物分析

 利用球磨法制备石墨-六角氮化硼微晶混合物，并在6.1 GPa、800~1 500 ℃条件下与水进行高压反应，以便研究用水作触媒合成B-C-N三元化合物的可能性。通过对反应产物的XRD、XPS谱分析发现：高压下随着温度的升高，反应产物中出现再结晶石墨，其晶化程度逐渐提高；但没有出现再结晶六角氮化硼，也未出现立方氮化硼。在球磨不充分条件下，石墨-六角氮化硼混合物的XRD谱没有完全弥散，它们与水高压反应时，能观察到石墨与立方氮化硼分别结晶的现象，但都没有形成B-C-N晶化结构。     

新疆红景天红色素的提取及理化性质的研究

对用索氏提取法和乙醇浸取法提取红景天红色素进行了比较，并探讨浸取的浓度，浸取温度等因素，指出了最佳生产工艺条件，从红景天中提取的天红色素是一种安全无毒的食用色素，本文还研究了几种食品添加剂对红景天红色素稳定性的影响，并对色素的耐氧化性进行了探讨，旨在为红景天红色素的开发利用提供有实用价值的信息。     

Contributions of Spin–Lattice Relaxation to the Echo Decay of Planar Cu in High-Temperature Superconductors

Measurement ofT_2G, the Gaussian component of the spin-echo envelope of planar Cu nuclei in high-temperature superconductors, gives important information about the real part of the Cu electron spin susceptibility. In the traditional picture of the planar Cu echo decay, the internuclear coupling is assumed to remain static with respect to spin–lattice relaxation and mutual exchange fluctuations. In some circumstances, however, this assumption breaks down. We calculate the internuclear corrections arising from spin–lattice relaxation to the conventional theory ofT_2Gand show thatT_2Gcan be easily corrected for these effects. We argue that mutual exchanges due to the perpendicular indirect couplings are suppressed in these materials. For YBa₂Cu₄O₈, we find a correction on the order of 10% inT_2Gand using the corrected values we find that the isotope ratio⁶³T_2G/⁶⁵T_2Gagrees with theory.     

Chromium and yttrium-doped magnesium aluminum oxides prepared from layered double hydroxides

Layered double hydroxides with the hydrotalcite-like structures, containing Mg²⁺ and Al³⁺, doped with Cr³⁺ and Y³⁺, have been prepared by precipitation at constant pH. The weight percentages of Cr³⁺ and Y³⁺ were 1, 2, or 3%, and 0.5 or 1%, respectively. Single phases were obtained in all cases, whose crystallinity decreased as the content in Cr and Y was increased. The solids have been characterised by element chemical analysis, powder X-ray diffraction, thermal analyses (differential, thermogravimetric and programmed reduction), FT-IR and UV–vis spectroscopies; the specific surface areas have been determined from nitrogen adsorption isotherms at −196 °C. Upon calcination at 1200 °C for 5 h in air all solids display a mixed structure (spinel and rock salt for MgO); these solids have also been characterised by these techniques and their chromatic coordinates (CIE – L^*a^*b^*) have been determined. Their pink colour makes these solids suitable for being used as ceramic pigments.     

Synthetic diamond electrodes: Photoelectrochemical behavior of vacuum-annealed undoped polycrystalline diamond films

The photocurrent and photopotential for undoped polycrystalline diamond film electrodes prepared by chemical vapor deposition and annealed in vacuum at 1500–1640°C are measured. The metal-like samples (annealed at 1630°C) have a negligible photosensitivity. Judging from the positive sign of the photopotential and the cathodic direction of the photocurrent, the material under study formally behaves as a p-type semiconductor. The photoeffects are presumably caused by structure defects, in particular, the dislocations in diamond crystallites formed close to intercrystalline boundaries during the high-temperature annealing.Translated from Elektrokhimiya, Vol. 41, No. 3, 2005, pp. 343–349.Original Russian Text Copyright © 2005 by Pleskov, Krotova, Ralchenko, Khomich, Khmelnitskii.     

TiO(2) porous electrodes with hierarchical branched inner channels for charge transport in viscous electrolytes.

Titanium dioxide (TiO(2)) photoelectrodes with micro/nano hierarchical branched inner channels have been prepared by an electrohydrodynamic (EHD) technique and assembled to form dye-sensitized solar cells (DSSCs). Excellent penetration of ionic-liquid electrolytes and enhanced light harvesting in the longer wavelength region are realized within the composite-structure electrode, thus a better fill factor (ff) of 75.3 % and higher conversion efficiency (eta) of 7.1 % are obtained for viscous ionic-liquid electrolytes compared to pure nanostructured films. Hierarchical branched channels in the photoanodes can efficiently improve the transport properties of redox-active species in viscous electrolytes, which is demonstrated by electrical impedance spectroscopy (EIS). The incident monochromatic photon-to-electron conversion efficiency (IPCE) shows that enhanced light scattering in the composite film is of benefit for light harvesting and thus for solar energy conversion efficiency.