XPS and AES characterization of hydrolysed γ‐mercaptopropyltrimethoxysilane deposited on Al,Zn and Al–43.4Zn–1.6Si alloy‐coated steel

In this paper Al, Zn and Al–43.4Zn–1.6Si (AlZn) alloy‐coated steel have been treated with the organofunctional silane γ‐mercaptopropyltrimethoxysilane (γ‐MPS). The influence of different metal substrates on the structure and composition of the silane films was investigated with XPS and AES. The films were obtained by dipping the substrates in the silane solution followed by a blow‐dry procedure in nitrogen gas. The results show that the surface concentration of the deposited silane is independent of the metal substrate and that the thickness of the silane film is non‐uniform. The AES measurements indicate that the silane film covers the entire substrate surface and XPS analysis of the silane‐treated substrate surfaces at different take‐off angles indicates that the γ‐MPS molecule is randomly orientated. Also, the results show that the silane is well hydrolysed under the solution conditions used. Finally, in the zinc‐containing silane‐metal systems, i.e. the silane‐treated AlZn and Zn substrates, the results indicate that the γ‐MPS molecules can bond to the substrate surfaces via the thiol group of the molecule. Copyright © 2004 John Wiley & Sons, Ltd.     

Kinetics of thermochemical pretreatment of lignocellulosic materials

The results of an experimental study of the acid hydrolysis of hardwood are presented in the form of values for the three parameters, activation energy, power on the acid concentration, and pre-exponen-tial factor, of the first order kinetic constants for each of the following reaction participants: xylan remaining, glucan remaining, xylose formed, and xylose decomposed. These are used as a base for a quantitative theory to predict the temperature, time, and acid concentrations needed for effective pretreatment of the substrate for subsequent enzymatic hydrolysis of the glucan. This theory is based on the assumption that successful pretreatment requires >90% removal of the xylan, <10% removal of the glucan, and >80% xylose yield. This theory is compared with selected published data.     

New generalized computations of quasi-planar waveguides characteristics

An efficient hybrid field solution to the general multilayer substrates transmission line problems with full shielded and half open cross-sectional geometry is presented by using the waveguide modes coupling and decoupling procedure in the spectral domain. Modal transverse transmission lines corresponding to the LSE and LSM modes are taken into account so that the Green's elements for the edge conditions can be derived by a simple iterative method. In this paper, we analyze not only the propagation constants and characteristic impedances but also the available transmission power capacity and power distribution of most commonly used structures. Normalized eigenmode power levels characterizing the propagation features are computed.     

Photocatalysed eosin Y mediated C(sp3)-H alkylation of amine substrates via direct HAT

A visible light promoted, photoredox catalysed, green one-pot approach for the alkylation of amine substrates with sp² carbon has been developed. This eosin Y based organic transformations, can behave as an effective direct hydrogen-atom transfer catalyst for coupling reaction. The proposed strategy includes simple procedure which can make adduct product with sp² carbon. This eosin Y based photocatalytic hydrogen-atom transfer strategy may hold great potential for diverse functionalization of a wide range of native CH bonds in an economical and sustainable manner.     

Reactions of fluorinated acid anhydrides, (CF3CO)2O, (CF3SO2)2O and (FSO2)2O, with organometallic substrates of group 15 (As, Sb and Bi)

(C₆H₅)₃MX₂ (M = As, Sb; X = OCOCF₃ and M = Sb, Bi; X = SO₃F, SO₃CF₃) compounds prepared by the interaction of triphenylmetal(V) substrates with (CF₃CO)₂O, (CF₃SO₂)₂O and (FSO₂)₂O have been characterized by molecular weight determination, elemental and spectroscopic (IR, ¹H and ¹⁹F NMR, mass) analyses.     

Template functions of particle monolayers on hydrophobic solid substrates

The template function of cationic particle monolayers bearing quaternary ammonium groups on their surfaces towards anionic colloids was investigated in this paper. Monodispersed cationic polymer particles having quaternary ammonium groups were self-organized on octadecylated glass plates through hydrophobic interaction. The morphology of the resulting particle monolayers was changed by tuning hydrophilic–hydrophobic balance of particles to fabricate aggregated type and dispersed type of particle monolayers. Gold and silver colloids were selectively deposited onto the particle monolayers through electrostatic interaction. The deposited gold and silver colloids on particle monolayers showed plasmon absorbance. Fluorescent silica colloids were also selectively deposited on particle monolayers to permit fluorescence labeling of the particle monolayers. Cationic particle monolayers fabricated on hydrophobic solid octadecylated were found to effectively work as templates for the deposition of above mentioned inorganic colloids.     

A low-temperature X-ray diffraction study of the Cu2ZnSnSe4 thin films

Low-temperature XRD measurements were performed to confirm the phase composition and structural parameters of the electrochemically deposited Cu₂ZnSnSe₄ thin films on flexible metal substrates.     

Low temperature hermetic laser-assisted glass frit encapsulation of soda-lime glass substrates

Room temperature and low temperature (120 °C) laser-assisted glass frit bonding of soda-lime glass substrates are accomplished in this work. The locally laser melted bonding showed hermeticity with helium leak rate of <5×10⁻⁸ atm cm³ s⁻¹, maintaining its leak rate even after standard climatic cycle tests. Small size devices were bonded at room temperature while larger areas were sealed at the process temperature of 120 °C. The sealing parameters were optimized through response surface methodology that makes the process capable for further development regardless of device size.     

Simple approach to study biomolecule adsorption in polymeric microfluidic channels

Herein a simple analytical method is presented for the characterization of biomolecule adsorption on cyclo olefin polymer (COP, trade name: Zeonor^®) substrates which are widely used in microfluidic lab-on-a-chip devices. These Zeonor^® substrates do not possess native functional groups for specific reactions with biomolecules. Therefore, depending on the application, such substrates must be functionalized by surface chemistry methods to either enhance or suppress biomolecular adsorption. This work demonstrates a microfluidic method for evaluating the adsorption of antibodies and oligonucleotides surfaces. The method uses centrifugal microfluidic flow-through chips and can easily be implemented using common equipment such as a spin coater. The working principle is very simple. The user adds 40 L of the solution containing the sample to the starting side of a microfluidic channel, where it is moved through by centrifugal force. Some molecules are adsorbed in the channel. The sample is then collected at the other end in a small reservoir and the biomolecule concentration is measured. As a pilot application, we characterized the adsorption of goat anti-human IgG and a 20-mer DNA on Zeonor^®, and on three types of functionalized Zeonor: 3-aminopropyltriethoxysilane (APTES) modified surface with mainly positive charge, negatively charged surface with immobilized bovine serum albumin (BSA), and neutral, hydrogel-like film with polyethylene glycol (PEG) characteristics. This simple analytical approach adds to the fundamental understanding of the interaction forces in real, microfluidic systems. This method provides a straightforward and rapid way to screen surface compositions and chemistry, and relate these to their effects on the sensitivity and resistance to non-specific binding of bioassays using them. In an additional set of experiments, the surface area of the channels in this universal microfluidic chip was increased by precision milling of microscale trenches. This modified surface was then coated with APTES and tested for its potential to serve as a unique protein dilution feature.