Using the gradients of temperature and internal parameters in Continuum ThermodynamicsIntroduction des gradients de température et de paramètres internes en Thermodynamique des Milieux Continus

In this paper, the possibility of using the gradients of the temperature and of the internal parameters as additional state variables in Continuum Thermodynamics is considered. The expressions of the two principles are discussed and Clausius–Duhem inequality is derived under an appropriate statement of the internal entropy production. Several formulations are proposed and compared to existing results in the literature. To cite this article: P. Ireman, Q.S. Nguyen, C. R. Mecanique 332 (2004).     

面向远海岛礁群的双向物流网络规划

针对若干远海岛礁群系统封闭性的分布特点,将中心岛礁选址、各岛礁建设泊位数量和规模、仓库储存量、运输船型和数量以及航线设置、班期组织等作为规划内容,以整个运输网络系统总成本最低为原则,综合考虑了仓库存储理论,建立了兼顾“选址-库存-路径”的规划模型。结合所建模型特点,提出了双层并行搜索遗传算法,构建了以海上运输为基本交通方式的双向物流系统。最后,以我国南海为例进行建模并求解,采用不同算法并通过多组不同规模的算例进行演算比较,验证了所建模型和算法的有效性与合理性。     

Reduction of phonon mean free path: From low-temperature physics to room temperature applications in thermoelectricity

It has been proposed for a long time now that the reduction of the thermal conductivity by reducing the phonon mean free path is one of the best way to improve the current performance of thermoelectrics. By measuring the thermal conductance and thermal conductivity of nanowires and thin films, we show different ways of increasing the phonon scattering from low-temperature up to room-temperature experiments. It is shown that playing with the geometry (constriction, periodic structures, nano-inclusions), from the ballistic to the diffusive limit, the phonon thermal transport can be severely altered in single crystalline semiconducting structures; the phonon mean free path is in consequence reduced. The diverse implications on thermoelectric properties will be eventually discussed.     

颗粒材料破碎演化路径细观热力学机制

颗粒材料在高应力环境下会发生颗粒破碎现象,颗粒破碎不仅影响颗粒材料的力学特性,同时与大量工程问题密切相关.目前的相关研究主要集中在唯象地描述颗粒破碎的演化以及破碎对力学特性的影响层面,对颗粒破碎演化路径的物理机制研究较少.本文基于热力学框架,采用细观力学中细观-宏观的均匀化方法推导了颗粒体系弹性能和破碎能量耗散,并在最大能量耗散的假设下,在热力学框架内,建立了理想化的无摩擦球体颗粒等向压缩过程的弹性-破碎模型,阐述了颗粒材料破碎演化路径细观热力学机制.由于模型的推导不依赖任何唯象的经验公式,因此模型中包含的参数均有明确的物理意义.模型预测与前人试验结果对比表明,材料的初始级配对弹性压缩模量和破碎应力的影响并不相同:不同分形维数级配对应的弹性体变模量存在极大值,而破碎应力却随着分形维数的增大单调递增;颗粒破碎的演化符合最大能量耗散原理,且颗粒材料的压缩曲线可以分为弹性-破碎-拟弹性3个机制不同的阶段.      

Adsorption of methyl orange on nanoparticles of a synthetic zeolite NaA/CuO

CuO supported on an NaA zeolite (CuO/NaA) was prepared with an NaA zeolite through the ion-exchange (CuO/NaA) method. The morphology and the physicochemical properties of the prepared samples were investigated by XRD, MEB, and EDS. The various parameters, such as contact time, catalyst dose, initial dye concentration, initial pH, and temperature, influencing the adsorption of methyl orange (MO) were optimized. The MO adsorption equilibrium was reached after 240 min of contact time. Removal of MO is better at neutral pH than in acidic and alkaline solutions. Among the tested models, the equilibrium adsorption data are well fitted by the Langmuir isotherm. The adsorption kinetics is best described by the pseudo-second-order model. The evaluation of the thermodynamic parameters, i.e. ΔG^o, ΔH^o, and ΔS^o, revealed that MO adsorption was spontaneous, while the activation energy (20.98 kJ/mol) indicates a physical adsorption. The photodegradation of MO decreased from 100 mg/L down to 2 mg/L when the solution is exposed to visible light.     

Analytical model for thermal resistance due to multiple moving circular contacts on a coated bodyModèle analytique pour la résistance thermique due à des contacts circulaires mobiles multiples à la surface d'un solide revêtu

The heat transfer at the interface of two solids in sliding/rolling contact depends on the constriction phenomenon which occurs at the vicinity of asperities. In order to study this problem, the micro-contacts are represented by multiple moving circular heat sources on the surface of a body. The studied body is constituted of a substrate and a surface coating. The thermal constriction resistance due to those contacts is determined analytically in this paper. The solution is developed by using the integral Fourier transforms, and it is valid regardless of the velocity and the relative contact size values. To cite this article: A. Baïri, C. R. Mecanique 331 (2003).     

利用三维随机模型分析沥青混合料的蠕变行为

将沥青混合料看作由粗骨料和沥青砂组成的两相复合材料,根据给定的级配生成凸多面体骨料,然后利用随机投放算法建立沥青混合料试样的三维随机模型.采用广义Maxwell模型刻画沥青砂的本构行为,其参数通过单轴蠕变实验获得.在对三维随机模型的有效性进行验证之后,采用参数化建模方法建立包含不同骨料分布、含量和级配的沥青混合料有限元模型,通过数值模拟研究骨料分布、含量和级配对沥青混合料蠕变行为的影响.结果表明:骨料分布对沥青混合料力学性质的影响较小;沥青混合料瞬时弹性模量随骨料含量的增加呈近似线性增大,而且弹性模量与骨料含量之间的关系曲线处于Paul上下边界内;在计算考虑的粒径范围内,骨料平均粒径越小,沥青混合料抵抗变形的能力越强.     

On Isomorphisms and Invariants of Finite Dimensional Complex Filiform Leibniz Algebras

In this article, we propose an approach classifying a class of filiform Leibniz algebras. The approach is based on algebraic invariants. The method allows to classify all filiform Leibniz algebras (including filiform Lie algebras) in a given fixed dimensional case.     

Thermal conduction properties of microcracked media: Accounting for the unilateral effect

Studies dedicated to the homogenization approach of microcracked media are largely focused on the determination of effective elastic properties. Some works investigate other properties, but most of them consider only open cracks. This paper intends to provide effective thermal properties related to the conduction problem taking into account the unilateral effect (opening/closure of cracks). Such analysis considers steady-state heat transfer within an initially isotropic media weakened by randomly oriented cracks. According to the boundary conditions, estimates and bounds based on Eshelby-like formalism are developed to derive closed-form expressions for effective thermal conductivity and resistivity in a fixed microcracking state.