New stereoselective syntheses of cis- and trans-2-methyl-4-arylpiperidines

A stereoselective approach has been developed for the synthesis of cis- and trans-2-methyl-4-arylpiperidines from a common intermediate. The Ni-catalyzed hydrogenolysis of N-Boc-2-methyl-4-aryl-4-piperidinols, obtained by addition of organometallic reagents on N-Boc-2-methyl-4-piperidone, afforded the trans derivatives with up to 95% selectivity whereas the corresponding cis isomers were obtained in the presence of palladium catalysts.     

Hydrodeoxygenation of glycerol into propanols over a Ni/WO3–TiO2 catalyst

1. Download : Download high-res image (71KB)
2. Download : Download full-size image

     

Catalyst selectivity in thiophene hydrodesulfurization: Effect of H2S and aging

The distribution of hydrodesulfurization (HDS) products of thiophene was compared on 9 different catalysts at different degrees of sulfidation and at aging in H₂/thiophene mixtures. The main products of HDS were C₄ and C_l-C₃ hydrocarbons. The effect of sulfur uptake on the productsmin distribution was similar for Co and Ni promoted, and reverse to that on Pd and Pt promoted samples. The effect of aging was similar for all samples. This revised version was published online in August 2006 with corrections to the Cover Date.     

Citric acid production from raw glycerol by acetate mutants of Yarrowia lipolytica

Three acetate mutants of the yeast species Yarrowia lipolytica were screened using batch cultivation. The strain Y. lipolytica 1.31 was found to be the most suitable for citric acid production from raw glycerol, a by-product of biodiesel production from rapeseed oil. At the initial concentration of glycerol of 200 g dm⁻³, the citric acid production of 124.5 g dm⁻³, yield of 0.62 g g⁻¹, and productivity of 0.88 g dm⁻³ h⁻¹ were achieved. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Production of 1,3-propanediol by Klebsiella pneumoniae

1,3-Propanediol (1,3-PD) has numerous applications from polymers to cosmetics, foods, lubricants, and medicines. Recently, there are strong industrial interests in a new kind of polyester, polytrimethylene terephthalate, with 1,3-PD as a monomer. This new polyester shows significant promise for use in carpeting and textiles. In this article we introduce a mild aerobic fermentation process using a strain screened from Klebsiella pneumoniae ATCC 25955, which is insensitive to oxygen, to produce 1,3-PD. We also describe a two-step fermentation process starting with glucose that was converted into glycerol with a glycerol-producing yeast, followed by K. pneumoniae that converts glycerol into 1,3-PD without intermediate isolation and purification of glycerol.     

Blends of starch with ethylene vinyl alcohol copolymers: effect of water,glycerol, and amino acids as plasticizers

Blends of thermoplastic starch with poly(ethylene‐co‐vinyl alcohol) copolymer (EVOH) were melt extruded with water/glycerol as plasticizer and a series of amino acid additives. The biggest factor in end‐use mechanical properties proved to be the relative humidity (RH) during storage. Plasticized starch‐EVOH blends stored at 0 and 50% RH changed significantly over time, with, for example, the tensile strength (TS) of the glycerol‐plasticized blend increasing from 4.7 to 26.3 MPa over 8 weeks when maintained at 0% RH. In contrast, the TS of this same sample stored at 75% RH remained unchanged for 8 weeks. Amino acids provided relatively minor, but significant changes in mechanical properties with time. Based on TS, elongation‐to‐break, and modulus, it may be concluded that β‐alanine, sarcosine, and L ‐proline were more effective than glycerol at maintaining strong flexible blends. Increases in crystallinity and changes in morphology with time, as described by modulated DSC were correlated to these changes in mechanical properties. Published in 2007 by John Wiley & Sons, Ltd.     

锆助剂对低温液相合成甲醇用铜铬硅催化剂性能的影响

考察了含锆的铜铬硅催化剂低温液相合成甲醇性能，并进行了BET、TPR-H2、TPD-H2、TPD-CO、XRD和XPS表征。结果表明，锆作为结构助剂及电子助剂对催化剂在低温液相合成甲醇反应中具有显著的促进作用，反应活性可提高32.25 ％。锆助剂能有效提高催化剂的比表面积，促进催化剂中铜铬组分的分散及表面富集。ZrO2加入在催化剂表面产生的Cu+与催化活性的改善密切相关，Zr4+、Cr3+、Cu+可形成复合中心，为价态的稳定性提供微环境，在H2活化及C O键的断裂等反应步骤中起重要作用。     

Investigation in the Area of Furan Acetal Compounds. 13. Synthesis and Structure of 1,3-Dioxacyclanes Based on Furfural and Glycerol

The optimum conditions were found for the condensation of glycerol with furfural. It was shown that the reaction of glycerol with furfural gives a mixture of the cis and trans isomers of five- and six-membered furan 1,3-dioxacyclanes. The cis- and trans-5-hydroxy-2-furyl-1,3-dioxanes were isolated by column chromatography, and their stereochemical structure was established by IR and NMR spectroscopy.     

Sound absorption properties of polyurethane foams derived from crude glycerol and liquefied coffee grounds polyol

The main objective of this study was to evaluate the sound absorption properties of rigid polyurethane foams (PUFs) produced from crude glycerol (CG) and/or liquefied coffee grounds derived polyol (POL). The lignin content of POL proved to have a major influence on the structure and mechanical properties of the foams. Indeed, the POL content increased the cell size of the foams and their stiffness, which subsequently influenced the sound absorption coefficients. The POL derived foam has slightly higher sound absorption coefficient values at lower frequencies, while the CG foam has higher sound absorption coefficient values at higher frequencies. In turn, the foam prepared using a 50/50 mixture of polyols presents slightly higher sound absorption coefficient values in the medium frequencies range due to a balance between the cell structure and the mechanical properties. The results obtained seem to suggest that the mechanisms involved in sound wave absorption depend on the formulation used to prepare the foams. Additionally higher POL contents improved the thermal stability of PUFs as well as their mechanical properties. From this work the suitability of CG and/or POL derived PUFs as sound absorbing materials has been proven.     

Hydrogenation and hydrogenolysis of furfural and furfuryl alcohol catalyzed by ruthenium(II) bis(diimine) complexes

The catalytic activity of ruthenium(II) bis(diimine) complexes cis‐[Ru(6,6′‐Cl₂bpy)₂(OH₂)₂](Z)₂ ( 1 , Z = CF₃SO₃; 2 , Z = (3,5‐(CF₃)₂C₆H₃)₄B, i.e. BArF) and cis‐[Ru(4,4′‐Cl₂bpy)₂(OH₂)₂](Z)₂ ( 3 , Z = CF₃SO₃; 4 , Z = BArF) for the hydrogenation and/or the hydrogenolysis of furfural (FFR) and furfuryl alcohol (FFA) was investigated. The molecular structures of cis‐[Ru(4,4′‐Cl₂bpy)₂(CH₃CN)₂](CF₃SO₃)₂ ( 3 ′) and dimeric cis‐[(Ru(4,4′‐Cl₂bpy)₂Cl)₂](BArF)₂ ( 5 ) were characterized by X‐ray crystallography. The structures are consistent with the anticipated reduction in steric hindrance about the ruthenium centers in comparison with corresponding complexes containing 6,6′‐Cl₂bpy ligands. While compounds 1 , 2 , 3 , 4 are all active and highly selective catalysts for the hydrogenation of FFR to FFA under modest reaction conditions, 3 and 4 showed decreased activity. This is best explained in terms of reduced Lewis acidity of the Ru²⁺ centers and reduced steric hindrance about the metal centers of catalysts 3 and 4 . cis‐[Ru(6,6′‐Cl₂bpy)₂(OH₂)₂](BArF)₂ ( 2 ) also displayed high catalytic efficiency for the hydrogenation of FFA to tetrahydrofurfuryl alcohol. Presumably, this is because coordination of C═C bonds of FFA to the ruthenium center is poorly inhibited by non‐coordinating BArF counterions. Interestingly, cis‐[Ru(6,6′‐Cl₂bpy)₂(OH₂)₂](CF₃SO₃)₂ ( 1 ) showed some catalytic activity in ethanol for the hydrogenolysis of FFA to 2‐methylfuran, albeit with fairly modest selectivity. Nonetheless, these results indicate that ruthenium(II) bis(diimine) complexes need to be further explored as catalysts for the hydrogenolysis of C―O bonds of FFR, FFA, and related compounds. Copyright © 2012 John Wiley & Sons, Ltd.