Numerical simulations of a filament in a flowing soap film

Experiments concerning the properties of soap films have recently been carried out and these systems have been proposed as experimental versions of theoretical two‐dimensional liquids. A silk filament introduced into a flowing soap film, was seen to demonstrate various stable modes, and these were, namely, a mode in which the filament oscillates and one in which the filament is stationary and aligns with the flow of the liquid. The system could be forced from the oscillatory mode into the non‐ oscillatory mode by varying the length of the filament. In this article we use numerical and computational techniques in order to simulate the strongly coupled behaviour of the filament and the fluid. Preliminary results are presented for the specific case in which the filament is seen to oscillate continuously for the duration of our simulation. We also find that the filament oscillations are strongly suppressed when we reduce the effective length of the filament. We believe that these results are reminiscent of the different oscillatory and non‐oscillatory modes observed in experiment. The numerical solutions show that, in contrast to experiment, vortices are created at the leading edge of the filament and are preferentially grown in the curvature of the filament and are eventually released from the trailing edge of the filament. In a similar manner to oscillating hydrofoils, it seems that the oscillating filaments are in a minimal energy state, extracting sufficient energy from the fluid to oscillate. In comparing numerical and experimental results it is possible that the soap film does have an effect on the fluid flow especially in the boundary layer where surface tension forces are large. Copyright © 2004 John Wiley & Sons, Ltd.     

On the Use of the Restitution Condition in Flexible Body Dynamics

The difference between the classical treatment offlexible body impact and the treatment of impact in flexiblemultibody dynamics is due to several fundamental reasons. Inthe classical impact theory, simple structures such as beamsand plates are used. Infinite dimensional models can bedeveloped for these simple structural elements to study theimpact dynamics and the wave propagation problem. Flexiblemultibody impact problems, on the other hand, involve bodieswith complex geometry that cannot be modeled using infinitenumber of degrees of freedom. Furthermore, the classicalimpact theory has been mainly concerned with the impactbetween a rigid mass that moves without constraints beforeit impacts a simple flexible structure. This is not amultibody simulation scenario in which the impact occursbetween kinematically constrained bodies that are subjectedto impulsive constraint forces in addition to the impactforces. These constraint forces can influence the motion ofthe two bodies immediately after impact, and as aconsequence, the simple classical theory scenario of impactdoes not apply. It is the objective of this paper to discussthe use of the restitution condition in flexible multibodyimpact problems and demonstrate that the use of thisapproach does not exclude the classical formulation.Nonetheless, the impulse momentum balance approach can serveas an effective and efficient procedure for solving theimpact problem in finite dimensional models that do not obeythe classical wave theory. Energy results of simplestructural elements are presented in order to demonstratethe consistency of using the impulse momentum balanceapproach in solving impact problems in finite dimensionalflexible body applications.     

Optimum Gas Journal Bearing with the Flexible Surface

The optimum shape of the cylindrical internal deformable (flexible) surface of a gas journal bearing of infinite length is designed. The variational problem of determining the clearance shape giving the maximum bearing load capacity is formulated and solved.     

Identifying potential binding modes and explaining partitioning behavior using flexible alignments and multidimensional scaling

A method is described for the rapid and automatic analysis of flexible molecular alignments using multidimensional scaling and a normalized scoring scheme. A projection scheme was devised to separate orientational and conformational effects. It is shown that the approach can be utilized for the identification of common binding orientations or to the study of differences in partioning behavior. It is suggested that the method can be employed as a novel approach exploring molecular similarity as a dynamic property, so that it includes aspects of motion (by way of mutual orientations), conformations and molecular properties.     

Synthesis and characterization of segmented liquid crystal poly(azoxy polyester-co-polyoxypropylene)

In this study a series of a segmented copolyester, poly(4,4′-dioxy-2,2′-dimethyl-azoxybenzene dodecanedioyl) (PMABD)-co-polyoxypropylene 400 (POP), was prepared. The chain length of PMABD studied (n) was varied from 7.8-18.2, and that of POP was unchanged. The intrinsic viscosity of the segmented copolyesters was 1.04-1.30, and the number average molecular weight obtained was 2.53 × 10⁴?3.49 × 10⁴ g/mol. The mesophase texture and thermal properties of the segmented copolyesters were measured as functions of n. It was found that the insert of flexible POP between those liquid crystalline domains of PMABD did affect thermotropic properties of PMABD. As the n value was 9.0 and 7.8 (or 7.4 and 8.6% by weight POP) the texture appeared as cholesteric-like oily streaks. The effect could not be attained by simply copolymerizing a mesogenic moiety with a pair of spacers of different lengths. The fluidity and domain structure of the flexible dodecanedioyl-POP-dodcanedioyl segments are taken into account for the obtained results. © 1995 John Wiley & Sons, Inc.     

一种非晶硅膜改性弹性玻璃毛细管交联中等极性固定相色谱柱的制备

研究了非晶硅膜改性的弹性玻璃毛细管交联ＯＶ－１７０１中等极性固定相色谱柱。在适当温度下，采用过氧化二异丙苯（ＤＣＵＰ）游离基引发交联ＯＶ－１７０１固定液，成功地制备了交联ＯＶ－１７０１柱，该柱具有柱效高、惰性好、耐溶剂、抗腐蚀和耐高温等性能，是一种新型高性能的中等极性交联柱。     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

Dynamic surface elasticity of polymer solutions

The surfaces of surfactant solutions exhibit viscoelastic dilational behavior which may be investigated by modern optical and mechanical methods. The present study focuses on the dynamic dilational properties of the polymer solution — gas interface. Linear flexible polymer chains at the surface are considered as consisting of trains, lying on the surface, and loops and tails that protrude into the liquid. The Rouse model is used to describe the inner dynamics of the trains, whereas their motion relative to their neighbors on the surface can be described with the help of the reptation conception. An expression for the complex dynamic dilational surface elasticity has been derived. Although, in general, the relaxation of the surface tension is characterized by an infinite series of relaxation times, it is shown that for many systems the dynamics of the surface layer can be described approximately by only two main relaxation times. The dispersion equation, which was obtained earlier for solutions of conventional surfactants, is shown to be fulfilled for polymer solutions also.     

Synthesis and Single Crystal Structure of a New Dinuclear Copper(II) Complex of 1,5-Bis(8-oxaquinoline)-3-methylpentane

A new flexible ligand, 1,5-bis(8-oxaquinoline)-3-methylpentane (C5MeOQ), was synthesized and used in the preparation of the new dinuclear copper(II) complex 1: [Cu₂(μ-OMe)₂(μ-C5MeOQ)(NO₃)₂]. Single crystal X-ray analysis revealed that complex 1 contains dinuclear Cu(II) units with bridging methoxo groups. The ligand, C5MeOQ, takes on a bent conformation in order to connect to and complete the square planar coordination environment of both copper centers; and one of the two Cu(II) centers adopts a distorted square planar configuration as a result of the ligand conformation. The magnetic properties of complex 1 were investigated by variable-temperature magnetic susceptibility measurements in the 100–300 K range. Interestingly, the susceptibility data for complex 1 reveals that the compound is diamagnetic, suggesting the presence of very strong antiferromagnetic coupling interactions between the adjacent Cu(II) centers.     

Computer based screening of compound databases: 1. Preselection of benzamidine-based thrombin inhibitors

We present a computational protocol which uses the known three-dimensional structure of a target enzyme to identify possible ligands from databases of compounds with low molecular weight. This is accomplished by first mapping the essential interactions in the binding site with the program GRID. The resulting regions of favorable interaction between target and ligand are translated into a database query, and with UNITY a flexible 3D database search is performed. The feasibility of this approach is calibrated with thrombin as the target. Our results show that the resulting hit lists are enriched with thrombin inhibitors compared to the total database.