Kinetics of Ion Transport by Macrocyclic Carriers in Liquid Membrane Systems

Abstract

The relationship between the extractability of a metal ion (K⁺ or Pb²⁺) and the rate of its transfer by neutral macrocyclic carriers (dibenzo-18-crown-6, dicyclo-hexano-18-crown-6, 18-crown-6, and polynactin) was investigated in chloroform membrane systems. The experimentally determined apparent rate constants are compatible with the diffusion-limited process. Both the rate of ion uptake and the rate of ion transport depend crucially on the extractability of the metal ion rather than on the apparent rate constant.     

Molecular design of crown ethers .18.~1 Cationextractability and selectivities of selena-13- to 14-crown-4

Three selena-crown-4 derivatives have been prepared and their cation binding abilities and selectivities with alkali and heavy metal ions have been evaluated by solvent extraction of aqueous metal picrates to show the highest Ag extractability for novel benzo-selena-14-crown-4 (2,3-benzo-7,12-diselena-1, 4-dioxacyclotetradecane-2-ene) over any other crown ethers.     

Extractability of Curcuminoids Is Enhanced with Milk and Aqueous-Alcohol Mixtures

In this study, we evaluated the extractability of three curcuminoids (curcumin, demethoxycurcumin, and bisdemethoxycurcumin) from turmeric powder in several solvents using high-performance liquid chromatography (HPLC) with the diode-array detection method. These solvents include water, milk (homogenized, 2% reduced fat, low fat, fat free, soy, almond, coconut, and milkadamia), and aqueous ethanols (0%, 4%, 10%, 20%, 30%, 40%, 50%, and 100%). Ambient water was able to extract only 0.55 mg/g of curcuminoids, whereas warm water extracted more than four-fold higher amounts (2.42 mg/g). Almond, coconut, and milkadamia milk were able to extract only small amounts of curcuminoids at ambient temperatures (0.01–0.07 mg/g). The extractability of curcuminoids in these milk types did not improve, even in warm conditions (0.08–0.37 mg/g). Whereas dairy and soy milk extracted 6.76–9.75 mg/g of curcuminoids under ambient conditions, their extractability increased significantly in warm conditions by 30–100% higher (11.7–14.9 mg/g). The solubility of curcuminoids also varied remarkably in different proportions of aqueous-alcohol mixtures. With 4% ethanol, only 1.7 mg/g of curcuminoids were extracted, and the amounts improved with the increase in ethanol content up to 50% (32.2 mg/g), while 100% ethanol extracted a similar amount as 50% ethanol (34.2 mg/g). This study suggests that the extractability of curcuminoids from turmeric will be dependent on the type of diets consumed with the turmeric supplements.     

Extraction of Alkali Metal (Li, Na, K) Picrates with Benzo-15-crown-5 into Various Organic Solvents. Elucidation of Fundamental Equilibria Determining the Extraction-ability and -selectivity

To quantitatively elucidate the effects of the benzo group on the extraction-selectively and -ability of benzo-15-crown-5 (B15C5)for alkali metal ions, the constants of the overall extraction (K_ex), thedistribution for various diluents having low dielectric constants (K_D,MLA), and the aqueousion-pair formation (K_MLA) of B15C5-alkali metal (Li, Na, K) picrate 1:1:1 complexes (MLA) weredetermined at 25 °C. The partition constants of B15C5were also measured at 25 °C. The log K_MLA values for Li⁺, Na⁺, and K⁺ are -0.32 ± 0.22, 2.66 ± 0.19, and 0.71 ± 0.47, respectively. In going from 15-crown-5 (15C5) to B15C5, the benzo group considerably decreasesthe K_MLA value for the same alkali metal ion. The distributionbehavior of B15C5 and its 1:1:1 complexes with the alkali metal picrates closely obeys regularsolution theory, omitting chloroform. Molar volumes and solubility parameters of B15C5and the 1:1:1 complexes were determined. For every diluent, the K_ex valuefor B15C5 increases in the order Li⁺ < K⁺ < Na⁺. K_D,MLA makes anunfavorable contribution to the Na⁺ extraction-selectivity of B15C5 because of the smallest molar volume of the Na(B15C5)A complex. The Na⁺ extraction-selectivity of B15C5 is determined completely by much the highest K_Na(B15C5)A value.The extraction-ability and -selectivity of B15C5 for the alkali metal picrates are compared with those of 15C5on the basis of the underlying equilibrium constants.     

Influence of the physiological stage and the content of soluble solids on the anthocyanin extractability of Vitis vinifera L. cv. Tempranillo grapes

The influence and the extent of the anthocyanin extractability from grape skins at different physiological stages and different soluble solids contents within each stage were investigated. For this purpose three different physiological stages (pre-harvest, harvest and over-ripening) and three soluble solids contents (22, 24 and 26 °Brix) within each stage were taken into account using Vitis vinifera L. cv. Tempranillo.     

Molecular Design of Crown Ethers. 22. Synthesis of Benzocrown Ether Derivatives and Their Solvent Extraction with Univalent／Bivalent Metal Picrates

Three novel benzocrown ether derivatives have been synthesized and their cation binding behavior with uniand bi-valent metal ions was evaluated by the solvent extraction of aqueous metal picrates. The obtained results indicate that the size-fit of crown ether and metal cation, and electron effect of the side arm attached to benzocrown ethers affect their cation binding ability and selectivity.     

Extraction of Sodium and Potassium Perchlorates with Dibenzo-18-crown-6 into Various Organic Solvents. Quantitative Elucidation of Anion Effects on the Extraction-Ability and -Selectivity

The constants for overall extraction into various diluents of low dielectric constants (K_ex) and aqueous ion-pair formation (K_MLA) of dibenzo-18-crown-6 (DB18C6)–sodium and potassium perchlorate 1:1:1 complexes (MLA) were determined at 25°C. The K_ex value was analyzed by the four underlying equilibrium constants. The K_MLA values were determined by applying our established method to this DB18C6/alkali metal perchlorate extraction system. The K_M(DB18C6)A value of the perchlorate is much greater for K⁺ than for Na⁺, and is much smaller than that of the picrate. The K_MLA value makes a negative contribution to the extractability of DB18C6 for MClO₄, whereas the value of the MLA distribution-constant does a major one. The partition behavior of M(DB18C6)ClO₄ obeys the regular solution theory. However, the M(DB18C6)ClO₄ complexes in the diluent of high dipole moment somewhat undergo the dipole–dipole interaction. DB18C6 always shows high extraction selectivity for KClO₄ over NaClO₄, which is governed largely by the much greater K_MLA value for K⁺ than for Na⁺. The K⁺ extraction-selectivity of DB18C6 over Na⁺ for perchlorate ions is comparable to that for picrate ions. By comparing this perchlorate system with the picrate one, the anion effects on the extraction-efficiency and -selectivity of DB18C6 for Na⁺ and K⁺ was discussed in terms of the fundamental equilibrium constants.     

Extraction of Alkali Metal (Na—Cs) Picrates with Dibenzo-18-crown-6 into Various Organic Solvents. Elucidation of Fundamental Equilibria which Govern the Extraction-Ability and -Selectivity

In order to quantitatively investigate effects of the size, the structuralrigidity, and the lipophilicity of dibenzo-18-crown-6 (DB18C6) on itsextraction-ability and -selectivity for alkali metal ions, constants of theoverall extraction (Kex), the distribution for various diluents of lowdielectric constants (K_D,MLA), and the aqueous ion-pairformation (K_MLA) of DB18C6-alkali metal (Na-—Cs) picrate 1:1:1 complexes were determined at 25°C; the partition constants of DB18C6 itself were also measured at 25°C. The log K_MLA of Na, K, Rb, and Cs are -0.14 ± 0.11, 1.30 ± 0.10, 1.00 ± 0.09, and 0.24 ± 0.11, respectively. The partition behavior of DB18C6 and its1:1:1 complexes with the alkali metal picrates can be clearly explained byregular solution theory, except for chloroform. The molar volumes andsolubility parameters of DB18C6 and the 1:1:1 complexes were determined.A relation between molar volumes of the complexes and K_MLAis discussed. The magnitude of Kex is largely determined by that ofK_D,MLA. For every diluent, the extraction selectivity of DB18C6increases in the order Na > Cs > Rb > K. The K extraction-selectivity of DB18C6 over Na is the highest among all the combinations of the two neighboring alkali metals in the periodic table. The extraction-ability and -selectivity for the alkalimetal picrates and their change with the diluent of DB18C6 were completely elucidated by the four fundamental equilibria and regular solution theory.     

Ultrasound-Assisted Extraction for the Evaluation of Element Mobility in Bottom Sediment Collected at Mining and Smelting Pb–Zn Ores Area in Poland

The current BCR procedure for metal fractionation recommended by the Standard Measurement and Testing Programme requires rather time-consuming sample pretreatment. Ultrasonic energy seems to be an attractive alternative for leaching metal from solid samples into a liquid extractant phase. This study aims at optimizing ultrasonic extraction in order to replace the BCR method of leaching using acetic acid and to apply the procedure of assessing element mobility in bottom sediment rich in moderately soluble carbonate minerals. The application of ICP-MS allowed the determination of As, Cd, Cr, Cu, Pb, Ni, Tl and Zn in extracts, in a wide range of concentration without any special treatment. Finally, 40’min extraction in an ultrasonic bath was proposed for evaluation of the mobile fraction of As, Cd, Cr, Cu, Pb and Zn as an assessment of environmental risk. The recovery of the ultrasound-assisted extraction in comparison to the shake-filter method, as applied in the common BCR procedure, was slightly higher than 100% for As, Cr and Pb, reasonably high (about 70%) for Cd, Zn and Cd, but did not exceed 21% for Tl. Also, the mobility and extractability (relative mobility) of the studied elements from sediment collected over one year were compares. According to the results obtained after 40’min of ultrasound-assisted extraction it can be concluded that mobility did not change over one year for Cr, Cu, As, Cd, Ni and Tl, but noticeable differences for Zn and Pb were observed. The total content of all studied elements was almost the same in samples taken in the years 2003 and 2004, respectively.     

可聚合型光引发剂4-丙烯酰氧基二苯甲酮的光聚合性能研究

以实时红外光谱(RT-IR)法研究了合成的4-丙烯酰氧基二苯甲酮(4-ABP)的光聚合动力学性质,考察了不同单体、不同引发剂和助引发剂浓度、不同光强对聚合性能的影响.以萃取法对比研究了4-ABP和二苯甲酮(BP)在固化膜中的的残留量.结果表明,4-ABP是一种非常有效的光引发剂.随着引发剂浓度和光强的增大,单体转化率、最大反应速率都增大,诱导期缩短.萃取实验表明4-ABP在固化膜中的残留量远低于BP.