Matrix effects in the determination of butyltin compounds in environmental samples by GC AA after hydride generation

Experiments for the determination of mono-, di and tri-butyltin (MBT, DBT and TBT) by hydride generation/gas chromatography/atomic absorption spectrometry in various matrices (sediment, suspended matter, mussel, algae and water) have revealed that poor butyltin recoveries are obtained in sediments displaying high sulphur and hydrocarbon contents; very poor recoveries were also observed for TBT in sediments with high chlorophyll pigment contents as well as in algal samples. It was however not clear whether the hydride generatin was inhibited by these infering compounds, as was previously assumed in the case of hydrocarbons, or whether interferences affected the atomization rate. Further studies were performed to solve this problem in order to validate this method in the case of analyses of, for example, oil-contaminated sediment and algae. This paper presents the results obtained. It is concluded here that the poor recoveries were due to an inhibition of hydride generation rather than to interference at the atomization stage.     

Breakage of λ-DNA by inorganic tin and organotin compounds as environmental pollutants

In proportion to the environmental pollution problems caused by organotin compounds, the genotoxicities of tin compounds in the environments have become of interest so as to estimate their safety in recent years. In this work, isolated λ-DNA (double-strand DNA) was incubated with inorganic tin(II) and tin(IV) and five organotin compounds [n-butyltin trichloride, di(n-butyltin) dichloride, methyltin trichloride, dimethyltin dichloride and trimethyltin chloride] in reaction systems both with and without hydrogen peroxide (H₂O₂) content. The tin compounds tested in this study did not induce DNA breakage in the absence of hydrogen peroxide. Divalent inorganic tin (SnCl₂) and tetravalent inorganic tin (SnCl₄) caused DNA breakage in the presence of hydrogen peroxide (10 mM), and the DNA damage activity of inorganic tin was much more potent in divalent inorganic tin (SnCl₂) than in tetravalent inorganic tin (SnCl₄). Divalent inorganic tin (SnCl₂) induced DNA breakage in a concentration-dependent fashion at concentrations greater than 0.1 mM of SnCl₂ in the presence of hydrogen peroxide (10 mM). DNA breakage was not caused by n-butyltin compounds and methyltin compounds either in the presence or in the absence of hydrogen peroxide.     

Communication Roles, Perceived Effectiveness, and Satisfaction in an Environmental Management Program

Earlier research has shown a relationship between various forms of structural centrality and perceived leadership and role satisfaction in small experimental groups. The limited amount of research on this topic in naturally occurring social networks has yielded results that often conflict with one another. Different results have generally been attributed to possible differences in task environments. This paper examines the relationship between two types of structural centrality and perceived influence, role satisfaction, and perceived effectiveness in an environmental resource management program. Findings in this paper suggest that the observed differences in relationships between the network and other variables is partly a function of global network properties (e.g., marginality of subgroups) and related task environments. This revised version was published online in August 2006 with corrections to the Cover Date.     

Detection of processed genetically modified food using CIM monolithic columns for DNA isolation

The availability of sufficient quantities of DNA of adequate quality is crucial in polymerase chain reaction (PCR)-based methods for genetically modified food detection. In this work, the suitability of anion-exchange CIM (Convective Interaction Media; BIA Separations, Ljubljana, Slovenia) monolithic columns for isolation of DNA from food was studied. Maize and its derivates corn meal and thermally pretreated corn meal were chosen as model food. Two commercially available CIM disk columns were tested: DEAE (diethylaminoethyl) and QA (quaternary amine). Preliminary separations were performed with standard solution of salmon DNA at different pH values and different NaCl concentrations in mobile phase. DEAE groups and pH 8 were chosen for further isolations of DNA from a complex matrix-food extract. The quality and quantity of isolated DNA were tested on agarose gel electrophoresis, with UV-scanning spectrophotometry, and by amplification with real-time PCR. DNA isolated in this way was of suitable quality for further PCR analyses. The described method is also applicable for DNA isolation from processed foods with decreased DNA content. Furthermore, it is more effective and less time-consuming in comparison with the existing proposed methods for isolation of DNA from plant-derived foods.     

The ICP-MS approach to environmental studies

The certification of marine materials for trace metals is a process which challenges every technique involved, especially if a technique is as recent as inductively coupled plasma mass spectrometry (ICP-MS), Developmental work was required for several materials (natural waters, biological materials, marine sediments). It is reviewed here, in an attempt to show how one can take full advantage of ICP-MS. This includes a review of the digestion procedures developed for the multielement analysis of biological materials and marine sediments in order to minimize spectroscopic interferences. The multielement analysis of natural waters is also reviewed, in particular that of saline waters which requires a separation of the analytes from the alkali and alkaline earths elements and a preconcentration of the analytes on a column of silicaimmobilized 8-hydroxyquinoline. The potential of performing this separation/preconcentration procedure on-line is showed using both published and original results. Finally, the application of ICP-MS to speciation is illustrated by the determination of methylmercury in biological materials after extraction, and by the determination of arsenic species by high performance liquid chromatography coupled to ICP-MS.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, AustriaThe work described was carried out while the author was a Research Associate at the Analytical Chemistry Section, Chemistry Division, National Research Council of Canada, Ottawa, K1A OR9, Canada     

A scratch-resistant single-layer antireflective coating by a low temperature sol-gel route

A novel quarterwave-thick narrow-bandwidth antireflective coating has been developed for both plastic and vitreous substrates by a sol-gel route. This coating has revealed pronounced scratch- and climatic-resistance under adverse conditions. The single-layer coating consists basically of a composite material made of silica as the discontinuous phase and of a polytetrafluoroethylene-derived (Teflon¹) organic polymer as the continuous phase. This leads to fluorine-containing colloidal silica product, or a so-called Flucosil coating. The coating is applied by spinning or dipping from specific solutions at room temperature followed by a mild and short heat treatment. In addition to remarkable abrasion and environmental resistance properties, such coatings have displayed excellent laser-induced damage threshold levels, surpassing uncoated substrates.We hope such a product might open new perspectives concerning household articles, architectural optical thin-films, ophthalmic uses, and so on.     

环境和生物样品中铂族金属的分析研究进展

评述了近年来环境和生物样品中痕量铂族金属的分析研究进展，重点介绍了样品的预处理和分离富集技术以及检测手段等。     

微量元素锡与健康

随着经济的发展，锡及其化合物越来越多地用于现代生活。综述了锡对人体健康的影响，包括：锡的性质、存在，环境污染、抗癌作用以及毒性等方面。     

Combination of three analytical techniques for speciation of Al in environmental samples

An analytical scheme is proposed which combines three speciation techniques for determination of particular Al species in soil extracts and percolating waters. A cation-exchange fast protein liquid chromatography — inductively coupled plasma atomic emission spectrometry (FPLC-ICP-AES) procedure, a microcolumn chelating ion-exchange chromatography- atomic absorption spectrometry (MCC-ETAAS) technique and the 8-hydroxyquinoline spectrophotometric method (8HQ-spectrophotometry) were employed. The FPLC-ICP-AES procedure offers determination of Al³⁺ (retention time 4.5 min) and Al(OH)²⁺ species (retention time 4.0 min) which are separated from Al(OH)⁺ ₂ (retention time 1.5min). AlF²⁺ coelutes with Al(OH)²⁺ species, while Al(SO₄)⁺, AlF⁺ ₂ and negatively charged Al organic complexes coelute with Al(OH)⁺ ₂ species. The MCC-ETAAS technique enables determination of the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphate- and fluoro-Al complexes. Employing the 8HQ-spectrophotometry the sum of positively charged monomeric aqua- and hydroxy-Al species plus sulphato- and most of the labile organic Al species are determined. The sensitivities of these selected techniques were adequate for speciation of Al in the samples analyzed. On the basis of the specific selectivity of a particular technique various groups of Al species may be determined. Thus, the comparison of analytical data from complementary procedures provides more comprehensive information on Al species present in soil extracts and percolating waters.     

High-temperature TG/DSC/QMS applications in environmental protection

The decomposition reactions of polystyrene, phenolic resin and a protective undercoating material for automobiles which contains PVC were tested using a new type of thermal analysis — mass spectrometry coupling system for measurements to 1500C or 2000C, which is based on the principle of a two-step skimmer orifice system. The results will be presented, with particular emphasis on the detection sensitivity of the new system for the products of decomposition.The capability of this coupling system to detect even heavy metals such as lead and silver in the waste gases from decomposition or after evaporation at high temperatures will also be demonstrated.