Crosslinked poly(ethylene oxide) containing siloxanes fabricated through thiol‐ene photochemistry

Homogenous amphiphilic crosslinked polymer films comprising of poly(ethylene oxide) and polysiloxane were synthesized utilizing thiol‐ene “ click ” photochemistry. A systematic variation in polymer composition was Carried out to obtain high quality films with varied amount of siloxane and poly(ethylene oxide). These films showed improved gas separation performance with high gas permeabilities with good CO₂/N₂ selectivity. Furthermore, the resulting films were also tested for its biocompatibility, as a carrier media which allow human adult mesenchymal stem cells to retain their capacity for osteoblastic differentiation after transplantation. The obtained crosslinked films were characterized using differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, FTIR, Raman‐IR , and small angle X‐ray scattering. The synthesis ease and commercial availability of the starting materials suggests that these new crosslinked polymer networks could find applications in wide range of applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1548–1557     

Ionic liquids as reagents and solvents in conjunction with microwave heating: rapid synthesis of alkyl halides from alcohols and nitriles from aryl halides

We show that using ionic liquids as reagents in conjunction with microwave heating it is possible to prepare primary alkyl halides from the corresponding alcohols rapidly. Using ionic liquids as solvents in conjunction with microwave heating it is possible to prepare aryl nitriles from the corresponding aryl bromides or iodides. The scope and limitations of using microwave-promotion as a tool in these reactions is discussed.     

Synthesis and cyclization of 1-arylalk-1-ene-3,5-diynylamines

An investigation of the reaction of 1-lithio-1,3-diynes, generated in situ, with nitriles has been carried out. In the case of aromatic nitriles 1-arylalk-1-ene-3,5-diynylamines are formed, which undergo dimerization and cyclization on isolation, giving 3-(alka-1,3-diynyl)-4-(alk-2-ynyl)-2,6-diarylpyridines. The effect of the nature of the substituent in the benzonitrile molecule on the selectivity of the reaction and the yield of the products has been determined. A scheme is proposed for the conversions and the structures of the intermediates have been established. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 701–710, May, 2006.     

Fluorinated,crosslinkable terpolymers based on vinylidene fluoride and bearing sulfonic acid side groups for fuel‐cell membranes

The radical terpolymerization of 8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene with vinylidene fluoride (VDF) and perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride is presented. Changing the feed compositions of these three fluorinated comonomers enabled us to obtain different random‐type poly[vinylidene fluoride‐ter‐perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride‐ter‐8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene] terpolymers containing various sulfonyl fluoride and brominated side groups. Yields higher than 70% were reached in all cases. The hydrolysis of the sulfonyl fluoride group into the ? SO₃Li function in the presence of lithium carbonate was quantitatively achieved without the content of VDF being affected, and so dehydrofluorination of the VDF base unit was avoided. These original terpolymers were then crosslinked via dangling bromine atoms in the presence of a peroxide/triallyl isocyanurate system, which produced films insoluble in organic solvents such as acetone and dimethylformamide (which totally dissolved uncured terpolymers). The acidification of ? SO₃Li into the ? SO₃H function enabled protonic membranes to be obtained. The thermal stabilities of the crosslinked materials were higher than those of the uncured terpolymers, and their electrochemical performances were investigated. According to the contents of the sulfonic acid side functions, the ion‐exchange capacities ranged from 0.6 to 1.5 mequiv of H⁺/g, whereas the water uptake and conductivities ranged from 5–26% (±11%) and from 0.5 to 6.0 mS/cm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4566–4578, 2006     

Oxygen inhibition in thiol–acrylate photopolymerizations

The overall effects of oxygen on thiol–acrylate photopolymerizations were characterized. Specially, the choice of thiol monomer chemistry, functionality, and concentration on the extent of oxygen inhibition were considered. As thiol concentration was increased, the degree of oxygen inhibition was greatly reduced because of chain transfer from the peroxy radical to the thiol. When comparing the copolymerization of 1,6‐hexanediol diacrylate with the alkane‐based thiol (1,6‐hexane dithiol) to the copolymerization with the propionate thiol (glycol dimercaptopropionate), it was found that the propionate system was much more reactive and polymerized to a greater extent in the presence of oxygen. In addition, the functionality was considered where the glycol dimercaptopropionate was compared to a tetrafunctional propionate of similar chemistry (pentaerythritol tetrakis(mercaptopropionate)). Given the same thiol concentration, the higher functionality thiol imparted a faster polymerization rate, due to the increased polymer system viscosity, which limited oxygen diffusion and decreased the extent of overall oxygen inhibition. Thus, preliminary insight is provided into how thiol monomer choice affects the extent of oxygen inhibition in thiol–acrylate photopolymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2007–2014, 2006     

Addition of nitriles to alkaline earth metal complexes of 1,2-bis[(phenyl)imino]acenaphthenes

Compounds [Sr(dpp-bian)(thf)4] (2), [Ba(dpp-bian)(dme)2.5] (3) and [Mg(dtb-bian)(thf)2] (4) (dpp-bian = 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene; dtb-bian = 1,2-bis[(2,5-di-tert-butylphenyl)imino]acenaphthene) were prepared by reduction of dpp-bian and dtb-bian with an excess of metallic Mg, Sr, or Ba in THF or DME. Reactions of [Mg(dpp-bian)(thf)3], 3, and 4 with diphenylacetonitrile gave keteniminates [Mg(dpp-bianH)(NCCPh2)(thf)2] (5), [Mg(dtb-bianH)(NCCPh2)(thf)2] (6), and [Ba(dpp-bianH)(NCCPh2)(dme)2] (7), respectively. The reaction of 2 with CH3C[triple chemical bond]N in THF gave [{Sr(dpp-bianH)[N(H)C(CH3)C(H)CN](thf)}2] (8). The compounds 2, 3, 5-8 were characterized by elemental analysis, and IR and NMR spectroscopy. Molecular structures of 2, 3, 7, and 8 were determined by single-crystal X-ray diffraction. In contrast to reactions of alkali-metal reagents, magnesium amides, or yttriumalkyls with alpha-H acidic nitriles, which are accompanied by an amine or an alkane elimination, the reactions of [Mg(dpp-bian)(thf)3] (1), 2, 3, and 4 with such nitriles proceeded with formation of Mg, Sr, and Ba keteniminates and simultaneous protonation of one nitrogen atom of the bian ligand. The NMR spectroscopic data obtained for complex 5 indicated that in solution the amino hydrogen atom underwent the fast (on the NMR timescale) shuttle transfer between both nitrogen atoms of the dpp-bianH ligand.     

The site of protonation of bifunctional bases with competing basic centers. I. Aromatic nitriles

The experimental values of the gas-phase proton affinities for a variety of 4-substituted benzonitriles, 4-substitutedN, N-dimethylanilines, and 4-substituted benzaldehydes have been examined by means of correlation analysis techniques and by ab initio quantum mechanical methods (MP2/ 6-31G(d) level). From this study it is concluded that in the gas phase, 4-(dimethylamino)-benzonitrile essentially protonates on the dimethylamino group, while protonated 4-cyanobenzaldehyde is very nearly a 21 mixture of the carbonyl- and cyano-protonated forms.This work is dedicatedin memoriam to Professor Robert W. Taft.     

1H and 13C assignments of two new triterpenes from Cladocolea grahami

The structure elucidation and 1H and 13C assignments of the new triterpenes 3beta-palmitoxy-7beta-hydroxyolean-12-ene (1) and its hydrolysis product 3beta,7beta-dihydroxyolean-12-ene (2) and 3beta-sn-glyceroyl-(1'-palmitoxy)urs-12-ene (3), isolated from the aerial parts of Cladocolea grahami (Loranthaceae), are reported.     

A new approach to β-amino acids: biotransformation of N-protected β-amino nitriles

A number of novel N-protected β-amino nitriles were prepared as substrates for two nitrile-converting microorganisms, Rhodococcus sp. R312 and Rhodococcus erythropolis NCIMB 11540. The respective biotransformation products, β-amino acids, are known to be pharmacological very potent compounds.