Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

世界上第一个物理技术研究所的建立及其影响

德国夏洛滕堡物理技术研究所（The Physikallisch-Technische Reichanstalt,简称PTR）是世界上第一个国家级的物理技术研究所，它开创了科学研究和技术研究相结合，服务于工业和国家经济之先河。文章从PTR建立的历史背景、早期研究工作和所产生的影响等方面作较为全面的讨论。     

Thermal effects on parallel resonance energy of whistler mode wave

In this short communication, we have evaluated the effect of thermal velocity of the plasma particles on the energy of resonantly interacting energetic electrons with the propagating whistler mode waves as a function of wave frequency and L-value for the normal and disturbed magnetospheric conditions. During the disturbed conditions when the magnetosphere is depleted in electron density, the resonance energy of the electron enhances by an order of magnitude at higher latitudes, whereas the effect is small at low latitudes. An attempt is made to explain the enhanced wave activity observed during magnetic storm periods.     

Nitrated polynuclear aromatic hydrocarbons in ambient air in Italy. A brief overview

When nitrated polynuclear aromatic hydrocarbons (NPAH) were recognised as long‐term toxic compounds and were also identified in several anthropogenic emissions and among the by‐products of photochemical smog they became objects of investigation in ambient air in both polluted and clean environments. In Italy the first investigations focussing on atmospheric NPAH were performed in the early eighties and encompassed both the canyon streets and dwelling areas of Rome. Because NPAH were indicated as markers of vehicle emission, new investigations were performed in other cities and also in rural and (nominally) unpolluted locations. In general, the first measurements of NPAH were episodic and could not be assumed to be strictly representative of the sites investigated. In contrast, nowadays consistent data bases on NPAH have been built up and are discussed in the technical literature, so that both neat concentrations and the yearly timed variation of the most important NPAH congeners have been measured in Italian air. Although concentrations of NPAH in air are usually much lower than those of PAH, owing to their very high potency in inducing mutations and tumours NPAH are regarded as having an important health impact on populations living in Italian urban areas. In this regard the genotoxicity of atmospheric aerosols is partly associated with nitrofluoranthenes and nitropyrenes whereas nitronaphthalenes and methylnitronaphthalenes seem to contribute to that of the gaseous organic fraction. Several civic and regional administrations are introducing control of atmospheric NPAH among ways of improving air quality in cities.     

Critical evaluation of gas standards based on hydrogen

Summary Six commercial hydrogen standards containing helium, oxygen, nitrogen, methane and carbon dioxide at trace levels were analyzed by gas chromatography, for periods up to 105 days. The concentrations, in the range of 0–120 μmol mol⁻¹, were stable (with the exception of oxygen) but often significantly different from the certified values provided by the suppliers, especially for helium, oxygen and nitrogen. Concurrently, some experiments were carried out to verify the stability of gas mixtures based on hydrogen stored in cylinders submitted to different chemical and physical treatments. The causes that led to the deviations observed, as well as the decreases in oxygen, are discussed. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996.     

多电子束契伦柯夫自由电子激光振荡器

我们对多电子束契伦柯夫自由电子激光进行了首次实验研究。280A,500kV的电子束被引入一多介质矩形谐振腔,在频率为33.4GHz处产生了1.7MW的契伦柯夫相干受激辐射。互作用效率为1.2％。     

Characterization of high-temperature superconductors by electron microprobe analysis

In order to optimize the physical properties of HTSC small single crystals grown from a melt for basic studies of their physical properties the influence of the environment on their impurity content was investigated by EPMA. This requires quantitative analysis of all elements being present in the crystals. The accuracy of results was affected by problems with the choice and quality of standards, by contamination but also by malfunction of microprobe electronics. The HTSC materials were found to react with mills, milling balls, crucibles and the atmosphere. These problems are being discussed and some reactions being studied for Y₁Ba₂Cu₃O_6+x (0 < x < 1) HTSC in A1₂O₃ and ZrO₂ crucibles. The crystals grown contain reproducible amounts of impurities depending on boundary conditions and exhibit a zone structure in composition particularly for Y and Ba within their range of homogeneity.     

高分辨等离子体质谱法直接测定高纯镓中的痕量元素

建立高分辨电感耦合等离子体质谱法(HR-ICP-MS)测定高纯镓样品中Be、Mg、A l、S i、Ti、V、Cr、Mn、Fe、Co、N i、Cu、Zn、Ge、As、Mo、Ag、Cd、In、Sb、Ba、Pb、B i等痕量元素的方法。样品用HNO3 HC l经微波消解后,试液直接进样用HR-ICP-MS法同时测定上述元素,在高分辨质谱测量模式下避免了大量的质谱干扰,详细地研究了HC l和高纯镓所产生的基体效应,以Sc、Rh、Tl作为内标元素校正了基体效应,讨论和确定了实验的最佳测定条件。结果表明,23种痕量元素的检出限在0.001~0.21μg/L之间;回收率在89.8%~111.6%之间,相对标准偏差(RSD)小于3.3%。     

Identification of selenium species in urine by ion-pairing HPLC–ICP–MS using laboratory-synthesized standards

This study focused on the detection/identification of possible selenium metabolites in human urine. Organoselenium compounds not commercially unavailable were synthesized and characterized by electrospray mass spectrometry. Separation of selenomethionine, methylselenomethionine, trimethylselonium, selenoethionine, and selenoadenosylmethionine was achieved by ion-pairing HPLC with a mobile phase of 2 mmol L^–1 hexanesulfonic acid, 0.4% acetic acid, 0.2% triethanolamine (pH 2.5), and 5% methanol. The column effluent was introduced on-line to inductively coupled plasma–mass spectrometry for selenium-specific detection (⁷⁷Se and ⁷⁸Se). For selenium speciation in urine, solid-phase extraction was carried out using C₁₈ cartridges modified with hexanesulfonic acid. Selective retention of cationic species was observed from acidified urine (perchloric acid, pH 2.0). After elution with methanol, evaporation, and dissolution in the mobile phase, the sample was introduced to the HPLC–ICP–MS system and the chromatographic peaks were assigned by adding standards. The species identified in urine were selenomethionine, trimethylselonium ion, and selenoadenosylmethionine. The last species was detected for the first time and our results suggest that selenomethionine might enter the metabolic pathway of its sulfur analog in the activated methylation cycle.Kazimierz Wrobel and Katarzyna Wrobel are on the leave from the Institute of Scientific Research, University of Guanajuato, L. de Retana No. 5, 36000 Guanajuato, Gto., Mexico     

A way of establishing quality of measurements in gas analysis—national and international aspects

Standardising quality of measurements at both the national and international level results in a unity in measurement that may be regarded a synonym of traceability. In gas analysis, the key issue in achieving this aim is production of gaseous reference materials. Establishing a network of secondary measurement standards at gaseous CRM producers’ sites in Ukraine might be interesting for those involved in gas analysis activities. Inevitably, problems concerning the recognition of measuring capabilities of both national metrological institutes and local CRM producers are now an international issue. Thus, the problems of national adoption of international standards, as well as harmonisation between different international documents are currently relevant, and Ukrainian experience may be useful to others in this field. Presented at the 3rd International Conference on Metrology, November 2006, Tel Aviv, Israel.