MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.     

Copolymerization of N‐vinylcaprolactam and glycidyl methacrylate: Reactivity ratio and composition control

Free‐radical copolymerizations of N‐vinylcaprolactam (VCL) and glycidyl methacrylate (GMA) were investigated to synthesize temperature‐responsive reactive copolymers with minimized compositional heterogeneity. The average copolymer composition was determined by Fourier transform infrared and nuclear magnetic resonance techniques. The reactivity ratios for VCL and GMA were found to be 0.0365 ± 0.0009 and 6.44 ± 0.36 by the Fineman–Ross method and 0.039 ± 0.006 and 6.75 ± 0.29 by the Kelen–Tudos method, respectively. When prepared by batch polymerization, VCL–GMA copolymers had a highly heterogeneous composition and fractions of different solubilities in water. The use of a gradual feeding technique, which included the sequential addition of more reactive GMA monomer into the reaction, yielded copolymers with much more homogeneous composition. The produced copolymers with 0.9 and 0.11 fractional GMA contents preserved their temperature‐responsive properties and precipitated from aqueous solutions when the temperature exceeded 31 °C. The GMA units in the VCL–GMA copolymers were capable of reacting with amino end‐functionalized poly(ethylene oxide) at room temperature to produce poly(N‐vinylcaprolactam)–poly(ethylene oxide) graft copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 183–191, 2006     

A coincidence transmission electron microscope with digital waveform measuring system for analytical microscopy

We have been developing a new analytical transmission electron microscope (TEM), called a coincidence TEM, which in principle enables elemental mapping images to be observed at a high signal‐to‐noise (S/N) ratio under very low dose radiation conditions. In this paper, we report the development of a coincidence TEM with a digital waveform measuring system for obtaining a coincidence elemental mapping image. In this system, analog signals detected by a Si(Li) detector and a multianode, position‐sensitive photomultiplier (PSPM) are continuously converted into 12‐bit digital waveform data at a rate of 100 MHz, and transferred to a PC. From the transferred digital waveform data, information on X‐ray photon energy, electron incident position, and detection times of both X rays and electrons are calculated by digital waveform measurement, which lead to the observation of a successful coincidence elemental mapping image. Copyright © 2005 John Wiley & Sons, Ltd.     

The effect of UV-irradiation on composting of polyethylene modified by cellulose

LDPE and its blend with cellulose, obtained by extrusion, were UV-irradiated with different doses or biodegraded in soil up to 1 year. Simultaneously, the same samples were 1 year biodegraded after 20 h UV pre-irradiation in the same conditions. The course of photo- and biodegradation was monitored by estimation of average molecular weights and polydispersity, gel amount, changes of PE crystallinity and mechanical properties. Moreover, the biodegradation degree was calculated on the basis of carbon dioxide evolved and surface morphological changes were observed by SEM. It was found that biodegradation of PE + cellulose is hampered by intermolecular crosslinking of both components. Although, the rate of decomposition of PE + cellulose blends is low it is enough for disintegration of such materials in the natural environment.     

相转移催化元素硫的歧化反应

本工作将相转移催化(PTC)应用于元素硫歧化反应,大大降低了反应温度,提高了反应速度。该反应被证实与熔态硫在水溶液中的歧化相同,即4S+6OH~-=2S~(2-)+S_2O_3~(2-)+3H_2O。比较了四乙基铵、四丁基铵、十六烷基三甲基铵和三辛基甲基铵四种相转移催化剂及四氯乙烯、二甲苯和四氯乙烷三种溶剂的影响。讨论了本体系相转移催化的证据。为改进以元素硫歧化反应为基础的提取冶金过程提供了依据。     

Fundamental and applied investigations in plasma-source mass spectrometry for elemental analysis

The current status of plasma source-mass spectrometry (PS-MS) is reviewed. An overview of interference effects that exist, alternative plasma sources available, and mass spectrometer interface studies is provided. A discussion of current and future development areas in plasma source mass spectrometry is also included.     

Analysis of microgram amounts of particulate material by simultaneous multiwavelength AES

A unique simultaneous emission spectrograph is utilized to perform qualitative and quantitative analysis on trace quantities of solid particulates. The atomic emission spectroscopic system consists of a direct current plasma source and an echelle spectrograph with a charge injection device detector, enabling the system to simultaneously measure the wavelength range from 220 nm to 520 nm with 0.02 nm resolution at 300 nm. Monitoring all wavelengths simultaneously allows the qualitative and quantitative determination of most major and minor constituent in a trace quantity of sample with little prior knowledge about the sample. The ability to perform qualitative and quantitative analysis on particulates is demonstrated by evaluating NBS certified coal fly ash, as well as a sample taken from the respirator air filter at an acute care unit in a hospital.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

ICP-MS for elemental speciation studies

The use of inductively coupled plasma mass spectrometry (ICP-MS) coupled with separation techniques for the purpose of elemental speciation has recently gained a lot of attention. Much of this is due to ever improving separation capabilities of Chromatographic techniques, the high sensitivity of ICP-MS, and the continuing development of better interface techniques. Additionally, there is a growing awareness of the need to monitor various species of an analyte, rather than just total analyte concentrations, due to their often varying natures. For the sake of learning from different elemental speciation approaches, this review brings together some selected types of elemental speciation which have been recently seen in literature. These include separations using various forms of liquid chromatography, such as reversed phase, reversed phase ion pairing, micelle, ion exchange, and size exclusion. Elemental speciation employing gas Chromatographie separations and supercritical fluid separations are discussed as well as elemental speciation using capillary electrophoresis.     

有机化合物中硫元素的微量库仑分析

含硫有机化合物在竖式石英燃烧管中,于氧气流下经950℃高温燃烧分解,生成的二氧化硫(或三氧化硫)通过含双氧水的石英棉转化管,转化为硫酸。硫酸泵入电解池后,进行酸-碱库仑滴定。本法操作按时间程序控制进行,每次分析时间为15分钟,分析绝对误差为±0.5％对含磷的有机硫化合物及含钠、铁、铜、钼、镍、镧等金属的有机硫化合物,如在样品上复盖一层三氧化钨进行燃烧分解,也可获得满意的结果。     

Iodine-Mediated Alkoxyselenylation of Alkenes and Dienes with Elemental Selenium

A one-pot synthesis of linear and cyclic β-alkoxyselenides is developed through the iodine-mediated three-component reaction of elemental selenium with alkenes (dienes) and alcohols. Selenylation of 1,5-hexadiene gives 2,5-di(methoxymethyl)tetrahydroselenophene and 2-methoxy-6-(methoxymethyl)tetrahydro-2H-selenopyran via the 5-exo-trig and 6-endo-trig cyclization. 1,7-Octadiene affords only linear 1:2 adduct with two terminal double bonds. 1,5-Cyclooctadiene results in one diastereomer of 2,6-dialkoxy-9-selenabicyclo [3.3.1]nonanes via 6-exo-trig cyclization. With 1,3-diethenyl-1,1,3,3-tetramethyldisiloxane, the first ring-substituted representative of a very rare class of heterocycles, 1,4,2,6-oxaselenadisilinanes, was obtained at a high yield.