New unsaturated polyesters as injectable drug carriers

New unsaturated polyesters of poly(fumaric acid-glycol-sebacic acid) copolymers and poly(maleic anhydride-glycol-sebacic acid) copolymers were prepared by melt polycondensation of the corresponding mixed monomers: sebacic anhydride, fumaric acid or maleic anhydride and glycol. Methyl-methacrylate (MMA) was used as crosslinker and dimer acid was used as thinner.In vitro studies showed that those copolymers are degradable in phosphate buffer at 37 °C and poly(fumaric acid-glycol-sebacic acid) has proper drug release rate as drug carriers. The biocompatibility of poly(fumaric acid-glycol-sebacic acid) copolymers under mice skin was also evaluated; macroscopic observation and microscopic analysis demonstrated that the copolymer is biocompatible and well tolerated in vivo. The injected poly(fumaric acid-glycol-sebacic acid) [molar ratio M_{fumaric acid}:M_glycol:M_{sebacic acid} = 1.75:2.20:0.25] containing 5% adriamycin hydrochloride (ADM) in the mice bearing Sarcoma-180 tumor exhibited a good antitumor efficacy. The volume doubling time (VDT) (18 ± 2.5 days) of the tumor growth by this treatment was longer than that (7 ± 0.9 days) by the subcutaneous injection of ADM.     

Controlled release of acetochlor from poly (butyl methacrylate-diacetone acrylamide) based formulation prepared by nanoemulsion polymerisation method and evaluation of the efficacy

Acetochlor is an important herbicide for gramineous weeds and some small seed broadleaf weeds. Controlled-release formulations of herbicide are highly desirable not only for attaining the most effective utilisation of the weed control, but also for reducing environmental pollution. Acetochlor was incorporated in poly (butyl methacrylate-diacetone acrylamide) based formulation to obtain controlled release properties. The acetochlor nanocapsules were characterised by size distribution, infrared spectroscopy (IR) and field emission scanning electron microscopy (FESEM), and factors related to loading efficiency, swelling behaviour of the formulation were investigated. For this controlled-release formulation, the loading efficiency could reach about 50% (w/w). n, the diffusion parameter was indicative of the transport mechanism, and the values for ‘n’ were in the range of 0.28–0.61, which indicated that the release of acetochlor was diffusion-controlled. The time taken for 50% of the active ingredient to be released into water, t₅₀, was also calculated for the comparison of formulations in different conditions. The formulation with higher temperature and more diacetone acrylamide had lower value of t₅₀, which means a quicker release of the active ingredient. This study highlighted some pieces of evidence that improved herbicide incorporation and slower release were linked to potential interactions between the herbicide and the polymer.     

PPH加Block术与单纯Block术治疗直肠前突的临床比较研究

目的 探讨吻合器痔上黏膜环切术（PPH 术）加直肠闭式修补术（Block 术）治疗直肠前突的临床疗效。方法 近9年来对女性直肠前突患者先后采用Block 术（36 例）和PPH+Block 术（41 例）治疗,分析两组患者的临床资料,观察并比较其术后第1 天出血量、术后并发症的发生率及疗效。结果 两组患者术后第1 天出血量及术后并发症发生率的差异均无统计学意义（均P＞0.05）。术后3、6、12个月PPH+Block 术组与Block 术组的痊愈率分别为85.4%、82.9%、82.9%和58.3%、52.8%、52.8%,差异均有统计学意义（均P＜0.05）。结论 PPH+Block 术治疗直肠前突较单纯Block 术疗效更好,值得推广应用。     

甲氨蝶呤/层状双金属氢氧化物的性能调控及细胞生物实验研究

在乙醇-水混合体系中,以氨水为沉淀剂共沉淀合成了甲氨蝶呤/层状双金属氢氧化物(MTX/LDH)纳米复合物,采用控制水热处理时间的方式来调控其性能。利用X-射线衍射(XRD)、透射电镜(TEM)和红外光谱(FT-IR)等表征手段,对其结构及形貌进行了表征。研究表明:MTX分子以单层倾斜或垂直方式插入LDH层间,随着水热处理时间的不同,MTX在层间的倾斜角度发生了变化;水热处理时间对产物的结晶度、粒径和层间排列方式都有影响,当水热处理时间为12h时,得到的MTX/LDH纳米复合物的结晶度最高,单分散性最好。在磷酸缓冲液中考察了MTX/LDH纳米复合物的缓释性能,结果表明样品均呈现出良好的缓释性能,释放速率先快后慢。重点考察了这几种MTX/LDH纳米复合物作用于肺癌细胞A549的细胞生物实验,研究表明这几种复合物对肺癌细胞A549都具有良好的抑制作用,其效果与纳米复合物的单分散性和粒径有密切的关系,单分散性越好,粒径分布越均匀,对A549癌细胞的抑制效果越好。     

Potential Value of Wood Tar as a Natural Fungicide against Valsa mali

The Valsa canker caused by Valsa mali seriously harmed the production of East Asian apples and caused very significant economic losses. Considering the chemical residues and the improvement of people’s awareness of environmental protection, there is a need for screening new green pesticides for the control of Valsa canker. Therefore, we conducted systematic evaluations on the antifungal activity of wood tar. In this research, the effective concentration (EC₅₀) of six strains of V. mali to wood tar was determined, and the EC₅₀ ranged from 69.54 to 92.81 μg/mL. After treatment with wood tar, the hyphae of V. mali broke, swelled, and deformed; the permeability of the cell membrane increased; and the activity of pectinase reduced. Moreover, the expression levels of five genes related to pectinase also decreased significantly. In addition, the activities of phenylalanine ammonia lyase (PAL) and peroxidase (POD) of apple leaves treated with wood tar also increased. On detached apple branches, wood tar also showed therapeutic and protective activities. In the 2016–2019 field experiments, wood tar also showed good efficacy against Valsa canker and promoted the formation of callus. (In the experiments from 2016 to 2019, it can be seen that the control effect of 50% wood tar and 100% wood tar in the field is above 75% and promoted the formation of callus.) This study is the first to report the bidirectional efficacy of wood tar against Valsa mali and for trunk wound healing. The above results evidenced that wood tar has great potential to be developed as a natural alternative to commercial fungicides for the management of apple Valsa canker.     

早期视网膜分支静脉阻塞患者倍频固体激光治疗对临床疗效及CMT值变化的影响

本文探讨了早期视网膜分支静脉阻塞患者倍频固体激光治疗对临床疗效及黄斑中心视网膜厚度(CMT)值变化的影响.将因视网膜分支静脉阻塞行激光治疗的30例患者纳入激光组,同期行常规治疗的30例患者纳入对照组,对比两组临床疗效、视力、CMT值变化、眼底荧光血管造影(FFA)检查渗透率及并发症.结果显示,治疗后激光组患者临床治疗总...     

表面活性剂的协同作用在甲维盐微乳剂中的应用

通过测定不同类型的单一及复配型表面活性剂水溶液的临界胶束浓度和表面张力,研究了它对W(甲维盐)=1%微乳剂的性能影响。膦酸酯类阴离子表面活性剂A的临界胶束浓度为1.79×10-4mol/L,表面张力为28.90mN/m;苯乙烯基酚聚氧乙烯聚氧丙烯醚嵌段型非离子表面活性剂B(EPE型)的临界胶束浓度为1.91×10-4mol/L,表面张力为20.70mN/m;按m(A)∶m(B)=2∶3形成的复配型表面活性剂2#的水溶液的临界胶束浓度为9.30×10-5mol/L,表面张力为25.66mN/m。当W(2#)=10%时,配制W(甲维盐)=1%的微乳剂物理稳定性最佳,各项指标均合格。对甘蓝小菜蛾幼虫的田间药效的试验,结果表明该药剂具有较强的杀虫作用和较长的持效期,具有较好的推广应用前景。     

多星测控调度问题任务优先级研究

在对多星测控调度问题工程需求进行分析的基础上,提出了多星测控问题中影响测控任务优先级的10个影响因素,并对各项因素对测控任务优先级的影响方式与影响程度进行了分析.利用功效系数法给出了设定优先级的算法,最后给出了一个算例.     

固态照明光源的基石--氮化镓基白光发光二极管

首先回顾了照明光源的简单历史 ,然后介绍了发光二极管 (LED)发展到大功率白光LED的历史 ,接着简述了国内外发展现状 ,主要技术路线及其特点 .最后阐述了作者在这方面的研究工作进展状况 ,对其发展趋势提出了一些看法 .