New poly(butylene succinate)/layered silicate nanocomposites. II. Effect of organically modified layered silicates on structure,properties, melt rheology,and biodegradability

A series of new poly(butylene succinate) (PBS)/layered silicate nanocomposites were prepared successfully by simple melt extrusion of PBS and organically modified layered silicates (OMLS). Three different types of OMLS were used for the preparation of nanocomposites: two functionalized ammonium salts modified montmorillonite and a phosphonium salt modified saponite. The structure of the nanocomposites in the nanometer scale was characterized with wide-angle X-ray diffraction and transmission electron microscopic observations. With three different types of layered silicates modified with three different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, materials properties, melt rheological behavior, and biodegradability. Interestingly, all these nanocomposites exhibited concurrent improvements of material properties when compared with pure PBS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3160–3172, 2003     

Isothermal crystallization kinetics of poly(3‐hydroxybutyrate)/layered double hydroxide nanocomposites

Poly(3‐hydroxybutyrate) (PHB)/layered double hydroxides (LDHs) nanocomposites were prepared by mixing PHB and poly(ethylene glycol) phosphonates (PEOPAs)‐modified LDH (PMLDH) in chloroform solution. Both X‐ray diffraction data and TEM micrographs of PHB/PMLDH nanocomposites indicate that the PMLDHs are randomly dispersed and exfoliated into the PHB matrix. In this study, the effect of PMLDH on the isothermal crystallization behavior of PHB was investigated using a differential scanning calorimeter (DSC) and polarized optical microscopy. Isothermal crystallization results of PHB/PMLDH nanocomposites show that the addition of 2 wt % PMLDH into PHB induced more heterogeneous nucleation in the crystallization significantly increasing the crystallization rate and reducing their activation energy. By adding more PMLDH into the PHB probably causes more steric hindrance of the diffusion of PHB, reducing the transportation ability of polymer chains during crystallization, thus increasing the activation energy. The correlation among crystallization kinetics, melting behavior and crystalline structure of PHB/PMLDH nanocomposites can also be discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3337–3347, 2006     

Using the new in–in method for the synthesis of polyisoprene/polystyrene heteroarm star polymers

The basis of the two‐step in–in method is as follows: star polymers with poly(divinyl benzene) cores, synthesized by the arm‐first method, include many unreacted double bonds in their core, and these double bonds can be attacked by the carbanions of some monomers such as styrene and dienes. In this work, linear polyisoprene chains were used to attack the double bonds existing in the poly(divinyl benzene) cores of polystyrene star polymers, so that a heteroarm star polymer with polystyrene and polyisoprene arms was synthesized. It was later well characterized with size exclusion chromatography, light scattering, viscometry, UV spectroscopy, dynamic mechanical thermal analysis, and ¹H NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 135–142, 2003     

Hydrolysis and polycondensation of ethyl silicates. 2. Hydrolysis and polycondensation of ETS40 (ethyl silicate 40)

The effects of catalysts, pH and reaction conditions on the course of the hydrolysis and condensation of ETS40 (ethyl silicate 40), and on the composition of the reaction products were studied with the aid of gas and gel chromatography, potentiometry and gelation tests. Strong acids (HCl, HClO₄, HNO₃, H₂SO₄, p-toluenesulphonic acid), weak acids (Cl₃, CCOOH, ClCH₂COOH, (COOH)₂, CH₃COOH and HCOOH) and bases (LiOH, NH₄,OH) were used as catalysts.

The hydrolysis rate increased with increasing temperature, catalyst concentration, initial water concentration and initial ethyl silicate concentration, whereas it decreased with increasing number of Si atoms in the ethyl silicate molecules. At pH 0–7 the hydrolysis was acid catalysed, but at pH above 7.0 it was base catalysed. Simultaneously with the hydrolysis, condensation occurred at a rate which increased with increasing temperature, catalyst concentration, ETS40 concentration and, above all, with increasing initial water concentration. The condensation rate depended on the pH. The condensation was at its slowest for pH around 2.0. For pH below 2.0, the condensation increased with increasing hydrogen ion concentration; for pH above 2.0 the condensation increased with decreasing hydrogen ion concentration. Phosphoric acid and hydrofluoric acid increased the rate of condensation considerably. The reaction of ETS40 with water at pH around 2.0 gave rise during the hydrolysis to solutions of ethoxyhydroxysiloxanes with an average of 14–20 Si atoms in a molecule, which displayed long-term stability.     

Incorporation of rare-earth ions in Mg-Al layered double hydroxides: intercalation with an [Eu(EDTA)] chelate

Reaction of an aqueous slurry of an Mg₂Al-NO₃ layered double hydroxide with a four-fold excess of Na[Eu(EDTA)] gives a material which analyses for Mg_0.68Al_0.32(OH)₂[Eu(EDTA)]_0.10(CO₃)_0.11·0.66H₂O. The interlayer spacing of the material is 13.8 Å, corresponding to a gallery height of 9.0 Å, which accords with the maximal dimensions (9-10 Å) of the anion in metal-EDTA complex salts as determined by single crystal X-ray diffraction. Geometrical considerations show that the charge density on the layered double hydroxide layers is too high to be balanced by intercalation of [Eu(EDTA)]⁻ alone, necessitating the co-intercalation of carbonate ions which have a much higher charge density.     

Heterogeneous Catalysis of Ozone Using Iron–Manganese Silicate for Degradation of Acrylic Acid

Iron–manganese silicate (IMS) was synthesized by chemical coprecipitation and used as a catalyst for ozonating acrylic acid (AA) in semicontinuous flow mode. The Fe-O-Mn bond, Fe-Si, and Mn-Si binary oxide were formed in IMS on the basis of the results of XRD, FTIR, and XPS analysis. The removal efficiency of AA was highest in the IMS catalytic ozonation processes (98.9% in 15 min) compared with ozonation alone (62.7%), iron silicate (IS) catalytic ozonation (95.6%), and manganese silicate catalytic ozonation (94.8%). Meanwhile, the removal efficiencies of total organic carbon (TOC) were also improved in the IMS catalytic ozonation processes. The IMS showed high stability and ozone utilization. Additionally, H₂O₂ was formed in the process of IMS catalytic ozonation. Electron paramagnetic resonance (EPR) analysis and radical scavenger experiments confirmed that hydroxyl radicals (•OH) were the dominant oxidants. Cl⁻, HCO₃⁻, PO₄³⁻, Ca²⁺, and Mg²⁺ in aqueous solution could adversely affect AA degradation. In the IMS catalytic ozonation of AA, the surface hydroxyl groups and Lewis acid sites played an important role.     

有机层界面对双层有机发光二极管复合效率的影响

建立了双层有机发光二极管中载流子在有机层界面复合的无序跳跃理论模型.由于有机分子材料的空间及能带结构的无序性，采用刚体模型处理有机层界面问题是不恰当的，而采用无序跳跃模型比较合理.复合效率及复合电流由载流子跳跃距离、有机层界面的有效势垒高度及该界面处的电场强度分布所决定：在双层器件ITO/α-NPD/Alq₃/Al中，当所加电压小于19.5V时，复合效率随着载流子跳跃距离的增加而增加，而大于19.5V时，复合效率随着其距离的增加而减少；复合效率随着有机层界面有效势垒高度的增加而增加； 关键词： 有机层界面 双层有机发光二极管 复合效率 有效势垒高度 无序跳跃模型     

Generalized binomial and negative binomial distributions of order<Emphasis Type="Italic">k</Emphasis> by the<Emphasis Type="Italic">l</Emphasis>-overlapping enumeration scheme

In this paper, we investigate the exact distribution of the waiting time for ther-th ℓ-overlapping occurrence of success-runs of a specified length in a sequence of two state Markov dependent trials. The probability generating functions are derived explicitly, and as asymptotic results, relationships of a negative binomial distribution of orderk and an extended Poisson distribution of orderk are discussed. We provide further insights into the run-related problems from the viewpoint of the ℓ-overlapping enumeration scheme. We also study the exact distribution of the number of ℓ-overlapping occurrences of success-runs in a fixed number of trials and derive the probability generating functions. The present work extends several properties of distributions of orderk and leads us a new type of geneses of the discrete distributions.     

New Component of the Moduli Space M(2;0,3) of Stable Vector Bundles on the Double Space P 3 of Index Two

We study the moduli scheme M(2;0,n) of rank-2 stable vector bundles with Chern classes c ₁=0, c ₂=n, on the Fano threefold X – the double space P ³ of index two. New component of this scheme is produced via the Serre construction using certain families of curves on X. In particular, we show that the Abel–Jacobi map :HJ(X) of any irreducible component H of the Hilbert scheme of X containing smooth elliptic quintics on X into the intermediate Jacobian J(X) of X factors by Stein through the quasi-finite (probably birational) map g:M of (an open part of) a component M of the scheme M(2;0,3) to a translate of the theta-divisor of J(X).     

Structure of Degenerate Block Algebras

Given a non-trivial torsion-free abelian group (A,+,Q), a field F of characteristic 0, and a non-degenerate bi-additive skew-symmetric map : A A F, we define a Lie algebra = (A, ) over F with basis {e_x | x A/{0}} and Lie product [e_x,e_y] = (x,y)e_x+y. We show that is endowed uniquely with a non-degenerate symmetric invariant bilinear form and the derivation algebra Der of is a complete Lie algebra. We describe the double extension D( , T) of by T, where T is spanned by the locally finite derivations of , and determine the second cohomology group H²(D( , T),F) using anti-derivations related to the form on D( , T). Finally, we compute the second Leibniz cohomology groups HL²( , F) and HL²(D( , T), F).2000 Mathematics Subject Classification: 17B05, 17B30This work was supported by the NNSF of China (19971044), the Doctoral Programme Foundation of Institution of Higher Education (97005511), and the Foundation of Jiangsu Educational Committee.