裂解气相色谱质谱法研究增塑剂邻苯二甲酸二甲酯的热降解机理

用裂解气相色谱-质谱联用方法研究了橡胶产品中使用的增塑剂邻苯二甲酸二甲酯(DMP)在不同温度条件下的热裂解行为.对不同温度条件下裂解产物的分析表明,在初始阶段DMP的裂解产物主要为二氧化碳、苯、甲苯和苯甲酸甲酯.随着温度的升高苯甲酸甲酯进一步裂解成为分子质量更小的自由基,并发生稠环化反应形成更稳定的菲、蒽、间-联三苯、三亚苯等芳香族多环化合物.根据分析实验提供的裂解产物信息和有机物热裂解化学反应的原理对DMP的热裂解反应机理作了探讨,表明在废旧合成橡胶热裂解回收过程中,增塑剂DMP的高温裂解会产生多环芳烃污染物.应选择合适裂解工艺和裂解温度,以减少对环境的污染.     

Determination of the rate of rapid lipid transfer induced by poly(ethylene glycol) using the SLM Fourier transform phase and modulation spectrofluorometer

Rate constants were determined for the transfer of the fluorescent lipid probe 1-palmitoyl-2-[[2-[4-(6-phenyl-trans-1,3,5-hexatrienyl)phenyl]ethyl] oxy]carbonyl]-3-sn-phosphatidylcholine (DPHpPC) between large, unilamellar extrusion vesicles composed either of dipalmitoyl phosphatidylcholine (DPPC) or of DPPC mixed with a small amount (0.5 mol%) of lyso phosphatidylcholine (Lyso PC). Transfer of the lipid probe in the presence of varying concentrations of poly(ethylene glycol) (PEG) was monitored using the SLM 48000-MHF Multi-Harmonic Fourier Transform phase and modulation spectrofluorometer to collect multifrequency phase and modulation fluorescence data sets on a subsecond time scale. The unique ability of this instrument to yield accurate fluorescence lifetime data on this time scale allowed transfer to be detected in terms of a time-dependent change in the fluorescent lifetime distribution associated with the lipid-like DPHpPC probe. This probe demonstrates two short fluoresence decay times (ca. 1.1–1.4 and 4.3–4.8 ns) in a probe-rich environment but a single long lifetime (ca. 7 ns) in a probe-poor environment. A simple two-state model for initial lipid transfer was used to analyze the multifrequency data sets collected over a 4-s time frame to obtain the time rate of change of the concentrations of donor and acceptor probe populations following rapid mixing of vesicles with PEG. The ability to measure fluorescence lifetimes on this time scale has allowed us to show that the of rate of lipid transfer increased dramatically at 35% PEG in both fusing and nonfusing vesicle systems. These results are interpreted in terms of a distinct interbilayer structure associated with intimate bilayer contact induced by high and potentially fusogenic concentrations of PEG.     

酯交换法合成碳酸二苯酯用氧化铅－氧化锌催化剂的研究

 制备了一种用于苯酚与碳酸二甲酯酯交换合成碳酸二苯酯的新型氧化铅－氧化锌多相催化剂．研究了制备方法、焙烧温度、不同母体和母体配比对催化剂催化性能的影响．应用XRD，TPR和原子吸收光谱对催化剂结构进行了表征，发现Pb3O4是主活性物相，ZnO为助催化剂，并以非晶态或微晶态存在于催化剂体系中．当焙烧温度为500℃，n（Pb）／n（Zn）≈2时，催化剂的活性最高，碳酸二苯酯产率可达45．6％．考察了催化剂的重复使用效果，并对失活原因进行了探讨．     

Mesoporous material as catalyst for the production of fine chemical: Synthesis of dimethyl phthalate assisted by hydrophobic nature MCM-41

Aluminum, iron and zinc containing MCM-41 molecular sieves were prepared by the hydrothermal method. The catalyst was characterized by the XRD, BET (surface area), FT–IR and ²⁹Si, ²⁷Al MAS–NMR techniques. The catalytic activity of these molecular sieves was tested with esterification reaction used with phthalic anhydride (PAH) and methanol (MeOH) in the autoclave at 135 °C, 150 °C and 175 °C. Conversion increases with an increase in temperature and mole ratio. The activity of these catalysts followed the order: Al-MCM-41 (112) > Fe-MCM-41 (115) > Al-MCM-41 (70) > Al-MCM-41 (52) > Fe-MCM-41 (61) > Al, Zn-MCM-41 (104) > Al-MCM-41 (30). The reaction yielded both monomethyl phthalate (MMP) and dimethyl phthalate (DMP). The nature of the catalyst sites has been proposed using with water as an impurity. The selectivity of the dimethyl phthalate increases with increase in temperature and mole ratio. The weight of the catalyst was optimized at 0.07 g. The hydrophilic and hydrophobic nature of the catalyst has been explained by the influence of water and the external surface acidity also facilitates the reaction and this has been confirmed by the supporting reaction.     

HPLC isolation and NMR structure elucidation of the most prominent octabromo isomer in technical octabromo diphenyl ether

The major octabromo isomer of technical octabromo diphenyl ether mixture (technical octaBDE) DE-79 was isolated by RP-HPLC. Three serially coupled columns (each 250 mm long) enabled a good separation of the target compound from other congeners using 100% ACN as eluent. Approximately 100 microg of the target compound was isolated with a purity of >90% and investigated by MS for confirmation of the degree of bromination. 1H-NMR and 2-D 1H-13C correlation NMR spectra unequivocally clarified that the octaBDE in question is 2,2',3,3',4,4',6,6'-octabromodiphenyl ether (BDE 197). Based on annual production rates of technical BDE products (1999/2001), approximately 380 tons of BDE 197 were annually produced which, on the long term, may enter the environment. Compared with other individual BDE congeners, BDE 197 has the seventh highest application rate. Reductive debromination of BDE 197 can lead to four hepta-, 15 hexa-, 23 penta-, and 28 tetra-BDE isomers, respectively. This variety includes all known major BDEs of environmental concern (BDE 47, 85, 99, 100, 153, 154, and 183). The identification of BDE 197 in technical octaBDE DE-79 strongly suggests that research on the environmental fate of BDEs should include this key-BDE congener.     

相转移催化合成增塑剂BBP和水杨醛的研究

相转移催化合成增塑剂ＢＢＰ和水杨醛的研究郭锡坤，高文华，曾东宇（汕头大学化学系，汕头５１５０６３）关键词相转移催化，季铵盐，聚乙二醇，邻苯二甲酸丁苄酯，水杨醛，增塑剂邻苯二甲酸丁苄酯（增塑剂ＢＢＰ）是一种优良的增塑剂．邻羟基苯甲醛（水杨醛）不仅是重要...     

一测多评方法应用于高效液相色谱法测定防晒产品中15种防晒剂的含量

选用CAPCELL PAK C18色谱柱为分离柱,柱温为30℃,进样体积为10.0μL,并用不同比例的(A)甲醇、(B)四氢呋喃和(C)0.008 2mol·L^-1高氯酸溶液的混合液作为流动相,按程序梯度洗脱模式对市售防晒产品中所用的15种防晒剂的标准品进行色谱分离,并在波长311nm处进行紫外检测。实样分析时,称取样品0.25g,用甲醇、四氢呋喃、水和高氯酸(体积比为250∶450∶300∶0.2)的混合液(以下简称混合溶剂)15 mL超声提取30 min,用混合溶剂定容至25.0mL,离心10min,分取上清液1.0mL,加入混合溶剂定容至10.0mL,经0.45μm滤膜过滤,取滤液按仪器工作条件进行高效液相色谱分析。结果表明:所测定的15种防晒剂在一定的质量浓度范围内与其对应的峰面积呈线性关系。选定其中的二苯酮-3为参照物,并根据其余14种化合物的质量浓度和峰面积计算了各化合物的相对校正因子和相对保留时间等参数,确定了用一测多评法(QAMS)测定防晒产品中15种防晒剂的条件。还对色谱柱的型号、色谱仪器的型号以及柱温、进样量等对相对校正因子和保留时间可能产生影响的因素进行了系统试验。证明了在选定的色谱柱型号的前提下,用QAMS方法可实现防晒产品中15种防晒剂含量的同时测定。应用QAMS方法测定了6个批次防晒产品中的防晒剂含量,所得结果与用标准曲线法计算的结果基本一致,表明QAMS方法在降低检测成本和节省检测时间方面效果显著。     

Synthesis and thermal stability of silicon-containing esters of phosphorus acids

A number of trialkylsilylmethyl diphenyl phosphates MeRR′SiCH₂OP(O)(OPh)₂ (1a-e: R=Et (a), Pr (b), CF₃CH₂CH₂ (c, e), Me₃SiCH₂ (d); R′=Me (a-d), Et (e)) were synthesized and their thermal rearrangement, of the 1,2-shift type, was studied. The rearrangement consists of the migration of an alkyl group from Si atom to the methylene carbon atom and gives the corresponding silyl esters. The rate of the rearrangement was found to increase in the order1d<1b<1a<1 (R=R′=Me)<1c corresponding to the enhancement of the total inductive effect (−I) of the substituents at the Si atom. The relative migration ability of the substituents at the Si atom, determined by GC/MS analysis of the disiloxane fraction resulting from hydrolysis of pyrolyzed phosphates1a-e, increases in the order R=Pr<Et<CF₃CH₂CH₂<Me≪Me₃SiCH₂, which differs substantially from the order in which the rate of the rearrangement of phosphates1a-d changes. The electronegativity of the migrating group affects noticeably the relative ability to migrate. For Part 4, see Ref. 1. Deceased. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 1767–1772, September, 1998.     

Convenient and High-Yielding Preparations of Mono(5-carboxy-2-ethylpentyl) Phthalate and its Ring-Deuterated Isomer – The “Third” Major Metabolite of Bis(2-ethylhexyl) Phthalate

Summary. The synthesis of an oxidative major metabolite of bis(2-ethylhexyl) phthalate is described. The target molecule and its ring-deuterated isomer were obtained via acylation of the appropriate -hydroxy benzyl ester or the corresponding carboxylate with phthalic anhydride or phthalic anhydride-d₄. All transformation steps proceed with high yields.     

Synthesis and structure of tetraphenylantimony hydrogen phthalate

Tetraphenylantimony hydrogen phthalate, Ph4SbOC(O)C6H4000H-o, was prepared by the reaction of pentaphenylantimony with phthalic acid. According to the data of X-ray structural analysis, the resulting compound is a trigonal-bipyramidal complex of antimony with three phenyl groups in equatorial positions; the fourth phenyl group and the carboxyl fragment are in axial positions. The CSbO angle is 177.5(1)° the Sb-C(Ph)_eq and Sb-C(Ph)ax distances are 2.099(4)-2.177(4) A and 2.129(4) A, respectively. The H atom of the free carboxyl group and the carbonyl O atom of another carboxylate group form an intramolecular hydrogen bond.DeceasedTranslated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 2082–2085, August, 1996.