马来酸二丁基锡的合成及其共聚合

马来酸二丁基锡的合成及其共聚合刘云桥金根河李福绵（北京大学化学与分子工程学院北京１００８７１）关键词马来酸二丁基锡，醋酸乙烯酯，交替共聚物，光聚合关于马来酸酐［１］，马来酰亚胺 Ｎ 取代物［２，３］与富电子烯类单体如苯乙烯，醋酸乙烯酯，乙烯基烷基醚...     

马来酸酐与二苄基马来酸酯共存体系的荧光分析法研究

本实验测定了二苄基马来酸酯甲醇溶液的荧光光谱，并发现马来酸酐对该荧光体系有猝灭作用，通过对不同马来酸酐浓度与各种浓度的二苄基马来酸酯甲醇溶液在４００ｎｍ处荧光强度数据的分析，发现马来酸酐的浓度与荧光猝灭程度在一定范围内呈良好的线型关系。据此，提出了用荧光猝灭法对马来酸酐及二苄基马来酸酯的定量分析     

阿斯美胶囊中四种组分的高效液相色谱分析

建立了反相高效液相色谱法测定阿斯美胶囊中氨茶碱、盐酸甲氧非那明、马来酸氯苯那敏及那可汀四种组分的含量。色谱柱为ＳｐｈｅｒｉｓｏｒｂＣ８，５μｍ，２００ｃｍ×４０ｍｍＩＤ，流动相为体积分数０５％的三乙胺溶液（磷酸调节ｐＨ５５）＋乙腈＋甲醇（５５０＋３６８＋８２），检测波长为２６４ｎｍ，线性范围分别为：氨茶碱３１２５～２５０ｍｇ／Ｌ，γ＝０９９９６，盐酸甲氧非那明１５６２５～１２５０ｍｇ／Ｌ，γ＝１００００，马来酸氯苯那敏２５～２００ｍｇ／Ｌ，γ＝０９９９９，那可汀８７５～７００ｍｇ／Ｌ，γ＝０９９９９；回收率（ｎ＝３）分别为１０１２％，１００８％，９９９％，９９５％；精密度：日内平均ＲＳＤ（ｎ＝６）分别为０７％，０４％，０４％，０６％；日间平均ＲＳＤ（ｎ＝３）分别为１０％，１０％，１１％，１２％。     

二(顺丁烯二酸异丙酯酰氧基)-异丙氧基钕及其与甲基丙烯酸甲酯共聚物的研究

用三异丙氧基钕与顺丁烯二酸酐反应合成含钕单体二（顺丁烯二酸异丙酯酰氧基） 异丙氧基钕，并与甲基丙烯酸甲酯（ＭＭＡ）共聚而制得含钕共聚物．用元素分析、ＩＲ、ＸＰＳ和ＳＥＭ对其结构进行表征，并研究了其热性能、光学性能和磁性．表明含钕共聚物是一种具有优异热稳定性、高透光率和大折光率，以及具有光选择吸收性和顺磁性的高分子材料     

Uncertainty assessment from robustness testing applied on an LC assay for R-timolol and other related substances in S-timolol maleate

The robustness testing of a normal-phase liquid chromatographic (LC) method for the determination of R-timolol and other related substances in S-timolol maleate was performed applying a two-level Plackett-Burman design. Two qualitative and five quantitative factors were examined. Two types of responses were considered, qualitative, i.e. chromatographic performance criteria, and quantitative ones. The latter were taken into account to determine if the analytical procedure was robust. The quantitative responses were the contents of R-timolol in two S-timolol maleate samples. Even though some significant factor effects were observed on the qualitative responses, the R-timolol contents were not significantly different from those observed at nominal conditions, which demonstrated the robustness of the procedure.Since the experiments of the Plackett-Burman design can be assimilated to laboratories in an interlaboratory study, uncertainty can be evaluated using the robustness test data. The robustness test was set-up in such a way that the required variances could be estimated. It was shown that the robustness set-up allows estimating the reproducibility uncertainty without performing an interlaboratory study.     

Chemical and analytical characterization of related organic impurities in drugs

A system is proposed for the classification of related organic impurities in drugs and drug products including among others (separated and non-separated) intermediates, various kinds of by-products, among them products of different side reactions, epimeric/diastereomeric, enantiomeric impurities, impurities in natural products, and finally degradation products. Examples are taken mainly from the author's own experience and from among the named impurities in the European Pharmacopoeia with focus on impurities in hydrocortisone, prednisolone, enalapril maleate, lisinopril, ethynodiol diacetate, pipecuronium bromide, cimetidine, and ethynylsteroids. The methodological aspects of impurity profiling from the detection to the identification/structure elucidation and quantitative determination of impurities are briefly summarized.This paper is Part 23 in the series "Estimation of impurity profiles of drugs and related materials". For Part 22 see ref. [1].     

β-Tricarbonyl compounds. I. 2,4-Disubstituted 1,3-cyclopentanediones

Summary Stable enolic isomers of 2-aroyl-4-aracyl-1,3-cyclopentanediones such as3 and4 were prepared by condensation of aryl methyl ketones and diethyl maleate using an excess of sodium ethoxide (Aryl=C₆H₅, 4-C₆H₄CH₃, 4-C₆H₄Br and 4-C₆H₄Cl).

---

-Tricarbonyl Verbindungen. I. 2,4-Disubstituierte 1,3-Cyclopentandione

Zusammenfassung Stabile Enol-Isomere von 2-Aroyl-4-aracyl-1,3-cyclopentandionen wie3 und4 wurden durch Kondensation von Arylmethylketonen und Diethylmaleat mit einem Überschuß von Natriumethoxid dargestellt (Aryl=C₆H₅, 4-C₆H₄CH₃, 4-C₆H₄Br und 4-C₆H₄Cl).

     

超临界二氧化碳中马来酸锌催化合成环状碳酸酯

在超临界二氧化碳中, 利用马来酸锌催化二氧化碳与环氧化物反应合成环状碳酸酯. 单独使用马来酸锌作为催化剂时, 对二氧化碳与环氧丙烷反应的催化活性较低, 而在DBU、DMAP、三乙胺、吡啶、咪唑或4-氨基吡啶等有机碱的存在下, 反应活性较高, 产物的收率得到明显提高. 有机碱作用的强弱顺序为DBU>Et3N>咪唑>4-氨基吡啶>DMAP>吡啶. 在压力为8 MPa, 温度110 ℃, 反应时间48 h条件下, 马来酸锌与DBU组成的二元催化系统可以催化二氧化碳与环氧丙烷反应, 得到83.4%产率的碳酸丙烯酯. 该二元系统也能催化其它环氧化物高产率地转化为相应的环状碳酸酯.     

Quantification of flupirtine maleate polymorphs using X-ray powder diffraction

Flupirtine maleate,a pharmaceutical compound for treating psychotic disease in clinics,has seven polymorphs.Form A,with better crystal stability and bioavailability,has been widely used as the pharmaceutical crystal form.Unfortunately,it is usually found in a polymorphic mixture with form B.In this study,pure crystal forms of A and B were prepared and characterized by X-ray powder diffraction (XRPD),Fourier transform infrared spectroscopy (FT-IR) and thermal analysis.An XRPD-based method for the quantitative determination of the amount of the flupirtine maleate polymorphs form A and form B was also established through a systematic optimization of instrumental parameters.The results of the analytical methodology validation showed that the XPRD method had a broad quantitative range of 0-100%(w/w),good linear relationship,with R²=0.999,excellent repeatability and precision and low limits of detection (LoD) of 0.15%(w/w) and quantification (LoQ) of 0.5%(w/w).The results also showed that the single-peak method was not as good as the whole pattern in reducing the influence of the preferred orientation,but this can be compensated for by a systematic optimization of instrumental parameters and validating the analytical methodology to reduce errors and obtain a good,repeatable,sensitive,and accurate method.This XRPD method can be used to analyze mixtures of flupirtine maleate polymorphs (forms A and B) quantitatively and control the quality of the bulk drug.     

顺丁烯二酸二异辛酯的合成

以顺丁烯二酸酐和异辛酯为原料，用对甲苯磺酸作催化剂合成顺丁烯二酸二异辛酯。用正交试验确定了酯化反应的优化条件，酯化率达97．96％．