排序方式: 共有7条查询结果,搜索用时 15 毫秒
1
1.
Mahendra?Nath?RoyEmail author Anuradha?Sinha Biswajit?Sinha 《Journal of solution chemistry》2005,34(11):1311-1325
The excess molar volume (V E), viscosity deviations (Δη) and Gibbs excess energy of activation for viscous flow (G∗E) have been investigated from density (ρ) and viscosity (η) measurements of eight binary mixtures of 1,3-dioxolane with methanol,
ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, t-butanol, and i-amyl alcohol over the entire range of mole fractions at 303.15 K. The viscosity data have been correlated with the Grunberg
and Nissan equation. Furthermore, excess isentropic compressibilities (KSE) have been calculated from ultrasonic speed measurements of these binary mixtures at 303.15 K. The deviations have been fitted
by a Redlich–Kister equation and the results are discussed in terms of molecular interactions and structural effects. The
excess properties are found to be either negative or positive depending on the molecular interactions and the nature of the
liquid mixtures. The systems studied exhibit very strong cross association through hydrogen bonding. 相似文献
2.
A novel, fluorinated diamine monomer with the ether–ketone group, 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzophenone ( 2 ), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride and 4,4′‐dihydroxybenzophenone in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Flourinated polyimides (PIs) 5a – f and copolyimides (co‐PIs) 5c / a – f were synthesized from 2 and various commercial aromatic dianhydrides via thermal or chemical imidization. PIs 5a – f had inherent viscosities ranging from 0.72 to 1.22 dL/g. Besides the chemical imidization of 5c ( C ), the 5 ( C ) series were soluble in amide‐type solvents and even in less polar solvents, but PIs 5a – f prepared via thermal imidization were insoluble. PI films 5a – f exhibited tensile strengths ranging from 92 to 112 MPa, elongations at break from 8 to 15%, and initial moduli from 2.0 to 2.1 GPa. The glass‐transition temperatures of the 5 series were in the range of 232–278 °C, and the 10% weight‐loss temperatures were above 535 °C, with more than a 50% char yield at 800 °C in nitrogen. In comparison of the PI 5 series with the analogous non‐fluorinated PIs 6 series based on 4,4′‐bis(4‐aminophenoxy)benzophenone, the 5 series revealed better solubility, lower color intensity, dielectric constant, and moisture absorption. Their PI films had cutoff wavelengths between 370 and 410 nm, b* values ranging from 9.6 to 58.3, dielectric constants of 3.05–3.64 (1 MHz), with moisture absorption in the range of 0.08–0.38 wt %. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 222–236, 2004 相似文献
3.
以溴代丁二酮为原料,分别从加料方式、酸度、原料摩尔比等方面优化了溴甲基取代甘脲的合成工艺。在溴代丁二酮与尿素的摩尔比为1∶5、加入水-乙醇混合溶剂、搅拌24h后加入溶剂体积2.5%的三氟乙酸、反应48h条件下,产率达60.8%。相对文献[10],本法产率提高了20%~30%。并利用溴甲基取代甘脲与多聚甲醛在氢溴酸-冰乙酸体系下75℃恒温反应1h,得溴甲基取代甘脲二醚,产率达65.5%。在利用核磁共振技术对化合物的结构及性能进行检测和表征的同时,使用X射线单晶衍射技术确定了其中两个化合物的晶体结构。 相似文献
4.
Sheng-Huei Hsiao Ching-Yen Yang 《Journal of polymer science. Part A, Polymer chemistry》1997,35(13):2801-2809
A spirobichroman structure-containing diether anhydride (SBCDA), 6,6′-bis(3,4-dicarboxyphenoxy)-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman dianhydride, was prepared by the nucleophilic nitrodisplacement of 4-nitrophthalonitrile with the phenolate ion of 6,6′-dihydroxy-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman, followed by alkaline hydrolysis of the intermediate tetranitrile and dehydration of the resulting tetraacid. A series of high molecular weight poly(ether imide)s with inherent viscosities between 0.45 and 1.28 dL/g were synthesized from SBCDA and various aromatic diamines via a conventional two-stage procedure that included ring-opening polyaddition in N,N-dimethylacetamide (DMAc) to give poly(amic acid)s, followed by thermal cyclization to poly(ether imide)s. The intermediate poly(amic acid)s had inherent viscosities of 0.70–1.50 dL/g. Except for the poly(ether imide) obtained from p-phenylenediamine, the other poly(ether imide)s were soluble in various organic solvents and could be solution-cast into transparent, flexible, and tough films. These poly(ether imide)s had glass transition temperatures in the range 175–262°C and showed no significant decomposition below 420°C, with 10% weight loss being recorded above 446°C in nitrogen or air. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2801–2809, 1997 相似文献
5.
以三乙基铝 (TEA) 为保护剂, 研究了 TiCl4/MgCl2/芴二醚/Al(C2H5)3 体系催化丙烯与十一烯醇或十一烯酸的共聚反应. 结果表明, 在极性单体存在下, 聚合反应活性随极性单体加入量的增加而降低, 但可保持丙烯均聚活性的一半以上, 反应活性衰减较小. 同时, 随着极性单体加入量的增加, 极性单体在共聚物中的含量增加. 与十一烯酸相比, 十一烯醇共聚具有更高的共聚活性和共单体含量. 随着共聚物中极性单体含量的增加, 聚合物的熔点和结晶温度都有所降低. 反应温度对丙烯和十一烯醇共聚的反应活性和共单体含量影响较小. 相似文献
6.
A. Villares 《The Journal of chemical thermodynamics》2004,36(12):1027-1036
This paper reports densities and speeds of sound for the binary mixtures of (1,3-dioxolane or 1,4-dioxane) with (2-methyl-1-propanol or 2-methyl-2-propanol) at the temperatures (298.15 and 313.15) K. Excess volumes and excess isentropic compressibility coefficients have been calculated from experimental data and fitted by means of a Redlich-Kister type equation. The ERAS model has been used to calculate the excess volumes of the four systems at both temperatures. 相似文献
7.
1