测接触角法确定偶联剂的最佳用量

偶联剂是一类能在无机填料和聚合物基材之间形成“分子桥”、改善两者之间相容性或提高两者之间相互作用能力的化合物。将经偶联剂改性的无机填料填充到聚合物中可以制得成本低、性能好的复合材料。由于偶联剂用量多少将对复合材料的性能产生较大影响,因此建立一种准确、简便地确定偶联剂最佳用量的方法有着十分重要的理论和实际应用意义。     

Hydrogen Effect on Coke Removal and Catalytic Performance in Pre-Carburization and Methane Dehydro-Aromatization Reaction on Mo/HZSM-5

1. Introduction As an effective utilization of methane, the methane dehydro-aromatization was focused in the last decade [1-28]. Over the Mo/HZSM-5 bi- functional catalyst at high reaction temperature, methane can be converted into light aromatics (ben- zene and naphthalene) and hydrogen. Mo active species can activate the C—H bond of methane; and HZSM-5 supplies the acid sites for the oligomeriza- tion and cyclization of hydrocarbons to form aromat- ics, and suppresses the deeper condens…     

选择脱卤还原反应的研究

Ramasamy、Osuka等用NaHTe/EtOH研究了二卤代物的脱邻二溴、偕二溴反应和α-溴代羰基化合物的脱卤还原反应,我们选择结构不同的卤代物以NaHTe还原,发现在水介质和催化量碲代替计算量碲时也能顺利地进行这类反应,其反应条件温和,产率高,是有机官能团转化的好方法。     

多支链烷基苯磺酸钠水溶液的表面性质

用自制的四种高纯度多支链烷基苯磺酸钠,研究了支链结构对其表面性质的影响.结果表明,随支链烷基碳数增加,临界胶束浓度降低,标准吸附自由能DGadӨ更负;但是,饱和吸附量Γmax却随支链烷基碳数增加而减小,且临界胶束浓度时的表面张力γcmc随吸附量减小而降低,表现出与一般表面活性剂不同的变化趋势.从多支链烷基苯磺酸钠的分子结构特点,解释了随支链烷基碳数增加Γmax和γcmc的变化规律,探讨了分子的独占面积(as)对Γmax及γcmc的影响.     

3D finite element simulation of explosive welding of three-layer plates

A 3D finite element model of the explosive welding process of three-layer plates with materials of steel-copper-copper is established. Based on the presented model, the bonding mechanism is simulated and analyzed, different detonation modes are also comparatively studied to indicate the driving force spread in few microseconds. The results show that the three layer plates bond together after many times of impact between the flyers and the base driven by detonation wave, which is damping rapidly at each impa...     

气相色谱-质谱法对鲜水果中5种保鲜剂残留量的同时测定

建立了气相色谱-质谱法(GC-MS)同时测定鲜水果中对羟基苯甲酸甲酯、对羟基苯甲酸乙酯、乙萘酚、4-苯基苯酚和联苯醚5种保鲜剂的分析方法。鲜水果样品经乙醚超声提取、浓缩后,活性炭柱净化,选择离子模式(SIM)下测定,外标法定量。在优化条件下,5种保鲜剂的线性范围为0.2～4.0 mg/L,相关系数(r2)大于0.991,联苯醚的检出限为0.05 mg/kg,其余4种保鲜剂的检出限均为0.1 mg/kg。5种保鲜剂的加标回收率为80.4%～104.5%,相对标准偏差(RSD)为1.2%～6.4%。该方法简便、快速、试剂价廉易得,且能消除鲜水果样品中色素等杂质的干扰,具有较高的准确度和精密度,适用于鲜水果中上述5种防腐保鲜剂残留量的测定。     

Simultaneous derivatization and air-assisted liquid–liquid microextraction of some aliphatic amines in different aqueous samples followed by gas chromatography-flame ionization detection

The paper presents a new method based on simultaneous derivatization and air-assisted liquid–liquid microextraction (AALLME) for the extraction and preconcentration of some aliphatic amines prior to gas chromatography-flame ionization detection (GC-FID). Primary aliphatic amines are derivatized and extracted simultaneously by a fast reaction with butylchloroformate (derivatization agent/extraction solvent) under mild conditions. The mixture of butylchloroformate and aqueous sample solution is rapidly sucked into a 10-mL glass syringe and then is injected into a test tube with conical bottom and the procedure is repeated seven times. After centrifuging the resulted cloudy solution, the derivatized analytes in the sedimented phase are determined by GC-FID. The influence of main factors on the efficiency of derivatization/extraction procedure is studied. Under the optimal conditions, the enrichment factors (EFs) for aliphatic amines are obtained in the range of 248–360 and limits of detection (LODs) are between 0.30 and 2.6 μg L⁻¹. The obtained extraction recoveries ranged from 50 to 72% and the relative standard deviation (RSD) was less than 4.8% for intra-day (n = 6) and inter-days (n = 4) precision. The method is successfully applied to determine some aliphatic amines in environmental water samples.     

国内外“物质的量”主题教学研究现状述评

分别以“Web of Science”与“中国知网”数据库为检索源,对2000—2020年间国内外“物质的量”主题研究论文进行检索,根据论文的研究内容进行分类归纳。研究表明:目前“物质的量”主题教学研究主要涉及:概念历史考量、教材研究、教师发展、学生认知与教学策略研究等5个方面。通过探析国内外的相关研究成果,以期为国内相关研究与实践提供有益借鉴。     

铀床氚残留量的测量

分别采用直接测量法、同位素交换法和溶解法测量铀床中的氚残留量, 并分析了这三种测量方法在本实验条件下的误差. 直接测量法测量铀床的氚残留量的结果如下: 铀床的氚残留量为2.68%, 即每克铀含(0.0308±0.0003) mmol 氚气; 当压力读数在1500～133332 Pa之间时, 基于理想气体状态方程的测量方法(简称PVT法)的标准差小于0.95%. 同位素交换法测量铀床氚的结果如下: 加热充分解吸过的铀床经多次同位素交换后, 其交换效率仅为2.84%, 即不到3%(摩尔分数)的氚被氘气载带出来, 其同位素交换法测量的标准差为7.35%. 溶解法能够彻底地测量铀床中残留的氚, 其溶解法测量的标准差为6.49%.     

化学计量研究进展

叙述了化学计量的特点、作用和重要性及其研究内容,探讨了标准物质量值传递系统及实现标准物质量值溯源性的途径,阐述了建立化学测量溯源性的重要性、困难性、复杂性及基本设想和途径,并对化学计量中物质的量“摩尔”进行了简要论述。