Sub-Doppler and Doppler spectroscopy of DCN isotopomers in the terahertz region: ground and first excited bending states (v1v2v3)=(0 1 0)

The rotational spectra of the deuterium cyanide isotopic species DCN, D¹³CN, DC¹⁵N, and D¹³C¹⁵N were recorded in the vibrational ground and first excited bending state (v₂=1) up to 2 THz. The R-branch transitions from J=3←2 to J=13←12 were measured with sub-Doppler resolution. These very high resolution (∼70 kHz) and precise (±3-10 kHz) saturation dip measurements allowed for resolving the underlying hyperfine structure due to the ¹⁴N nucleus in DCN and D¹³CN for transitions as high as J=10←9. Additional high JR-branch (J=25←24 to J=28←27) transitions around 2 THz and direct l-type (ΔJ=0, J=19 to J=25) transitions from 66 to 118 GHz were recorded in Doppler-limited resolution. For the ground state of D¹³C¹⁵N, the J=1←0 transition was measured for the first time. The transition frequency accuracies for the other deuterated species were significantly improved. These new experimental data, together with the available infrared rovibrational data and previously measured direct l-type transitions, were subjected to a global least squares analysis for each isotopomer. This yielded precise sets of molecular constants for the ground and first excited vibrational states, including the nuclear quadrupole and magnetic spin-rotation coupling constants of the ¹⁴N nucleus for DCN and D¹³CN. The hyperfine structure due to the D, ¹³C, and ¹⁵N nuclei have not been resolved, but led to a broadening of the observed saturation dips.     

K-Dependence and temperature dependence of N2-, H2-, and He-broadening coefficients for the J = 12-11 transition of acetonitrile CH3CN located near 220.7 GHz

Extensive experiments on the K = 3 component of the J = 12-11 rotational transition of acetonitrile CH₃C¹⁴N, located near 220.7 GHz, were performed at different temperatures in the range 235-350 K. They allow determining the N₂-, H₂-, and He-broadening coefficients, as well as their temperature dependences. More specific measurements on all the K-components of the involved transition perturbed by N₂ at 303 K allow to point out a clear decreasing of the broadening coefficient with increasing K. Narrowing effects are clearly observed, and experimental lines were analysed both with Voigt and speed dependent Voigt profiles; but no exhaustive lineshape study was carried out. All the experimental parameters are compared with results derived from a semiclassical calculation of collisional interactions, including electrostatic, induction, and dispersion energy contributions.     

双金属氰化络合物催化剂的形态及其对催化剂活性的影响

合成了多个基于钴氰化锌的双金属氰化络合物(DMC)催化剂,并对催化剂的结晶形态进行了表征.考察了制备过程中,有机配体及其引入方式,温度,搅拌速度对DMC催化剂形态的影响.其中有机配体对DMC催化剂形态的影响是最主要的.有机配体中富电子原子的电负性的强弱和数量共同影响着DMC催化剂的形态.该类原子的电负性越强,得到的DMC催化剂的结晶性越差,无定型部分的比例越高,并且单个原子的电负性强弱比该类原子的数量在此间的影响更大.而在有机配体预先存在的情况下,该沉淀体系则更有利于无定型部分的产生.在30℃左右的沉淀反应温度下,得到的DMC催化剂的无定型部分比例最高.在有机配体存在的情况下,搅拌速度对DMC催化剂形态的影响有限.并且发现存在于有机配体中的DMC催化剂随着时间的推移,形态会发生变化.初步揭示了DMC催化剂的形态与其催化活性间的关系.而无定型态的DMC催化剂更有利于PO的聚合.     

Fe/Zn双金属氰化物催化剂催化环氧丙烷聚合的活性结构研究

以氯化锌、铁氰化钾（含有整合剂）的水溶液为原料，合成了铁锌双金属氰化物（DMC）催化剂。为获得高活性的DMC催化剂，需将叔丁醇 、多元醇螯合剂螯合至其结构中，用XRD、XPS等分析手段，对铁锌DMC催化剂的结构与活性进行分析表征。实验发现，DMC催化剂的晶体结构与螯合剂密切相关，螯合剂能显著降低DMC催化剂的结晶程度，从而提高DMC催化剂的活性。同时，氯化锌过量也有利于DMC催化剂活性的提高。并表征了相关DMC催化剂的活性中心。     

氰根桥连的异金属配位聚合物{[Ni(pn)2][Fe(CN)4(bipy)]}2·3H2O(pn=1,3-丙二胺,bipy=2,2′-联吡啶)的合成与结构

以[Fe(CN)₄(bipy)]^2-为建筑块和[Ni(pn)₂]²⁺在水溶液中反应,合成了{[Ni(pn)₂][Fe(CN)₄(bipy)]}₂·3H₂O(pn=1,3-丙二胺)。通过X-射线单晶衍射确定了其晶体结构。该配合物属单斜晶系,P2₁/n空间群,晶胞参数为:a     

A short synthesis of 4-amino-3-hydroxybutyric acid (GABOB) via allyl cyanide

4-Amino-3-hydroxybutyric acid was synthesized from allyl cyanide in four steps in an overall yield of 38%. Ultrasonically promoted epoxidation of allyl cyanide with m-chloroperoxybenzoic acid giving oxiranylacetonitrile was used as a key step.     

Indirect spectrophotometric determination of cyanide

A spectrophotometric method for cyanide based on its inhibition of the colour formation reaction between nickel(II) and 3-(4,5-dimethyl-2-thiazolylazo)-2,6-dihydroxybenzoic acid has been developed, and allows the determination of down to 0.1 g of cyanide. Most of the interferences can be avoided by displacement of the hydrogen cyanide using an arsine generator.     

工业废水中微量铜（Ⅱ）和氰化物的流动注射光度分析

采用ＦＩＡ技术，以光度比色法为基础，建立了工业废水中微量Ｃｕ＾２＋和ＣＮ＾－的顺序自动分析方法和装置。其对二种离子的测定频率为６０样／ｈ，相对标准偏差＜１．０％，工作曲线的ｒ值≥０．９９９，各项分析技术指标均优于手工法操作。     

Novel Cyanide-Bridged Three-Dimensional Coordination Polymer Derived from an Octahedral Rhenium Cluster [Re6Te8(CN)6]4?: Synthesis and Crystal Structure of [{Mn(H2O)2(DMF)} 2Re6Te8(CN)6]·2H2O

The reaction of a water solution of K₄Re₆Te₈(CN)₆ with a solution of Mn(NO₃)₂ in 0.02M hydrochloric acid in the presence of DMF gave crystals of a cluster rhenium complex [{ Mn(H₂O)₂(DMF)}₂Re₆Te₈(CN)₆]·2H₂O. The structure of the compound was determined by single crystal X-ray diffraction (a = 12.6679(9) Å, b = 17.4524(12) Å, c = 9.7882(6) Å, β = 105.570(6)°, V = 2084.6(3) ų, Z = 2, space group P2₁/n, R = 0. 0389). In the complex, the [Re₆Te₈(CN)₆]⁴⁻ cluster anions are linked to Mn²⁺ cations by the cyanide bridges, the manganese cations being additionally coordinated by the DMF molecule and two water molecules. The neighboring clusters are joined by Re-C-N-Mn bridges into a three-dimensional framework possessing cavities filled with doubly disordered water molecules.Original Russian Text Copyright © 2004 by Yu. V. Mironov, S. F. Solodovnikov, V. E. Fedorov, and Yu. V. Gatilov__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 918–922, September–October, 2004.     

双金属氰化物络合物催化环氧烷烃开环聚合的特征

合成了Co Zn双金属氰化物 (DMC)络合物催化剂 ,以X 射线衍射、元素分析、红外光谱等手段进行了表征 ,考察了该催化体系下环氧丙烷开环聚合的反应特性 ,并初步探讨了聚合反应的机理 .研究发现 ,Co Zn双金属氰化物催化剂具有很高的催化活性 ,适合于中高分子量聚醚的合成 ,但是碱性起始剂起阻聚作用 ;在该催化体系下聚合物分子量可控 ,不饱和度很低 (<0 .0 14meq g) ,分批加料聚合所得到的聚合物分子量分布较窄 (Mn Mw <1.4 ) ,而一步加料聚合所得到的聚合物分子量分布变宽 ;1 3C NMR分析表明聚合物主链具有无规立构分布的特点 ,且链节分布几乎都为头 尾方式 .聚合过程中活性链与非活性链之间可能存在一个交换反应 ;虽然聚合反应有终止 ,但与聚合物链长没有关系 ,聚合物链的终止是可逆的 .