Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

Membrane-immobilized haptoglobin as affinity matrix for a hemoglobin-A1c immunosensor

An amperometric immunosensor for hemoglobin-A1c (HbA1c) determination has been developed utilizing membrane-immobilized haptoglobin as affinity matrix fixed in front of a Pt-working electrode. The HbA1c assay was carried out in a two-step procedure including the selective hemoglobin enrichment on the sensor surface and the specific HbA1c detection by a glucose oxidase (GOx) labeled anti-HbA1c antibody. Hydrogen peroxide generated by the enzyme label was oxidized at +600 mV versus Ag/AgCl. A standard curve for HbA1c was obtained with a linear range between 0 and 25% HbA1c of total hemoglobin which correspond to 7.8–39 nM. ELISA studies confirmed the advantage of a sandwich-type format with haptoglobin as capture molecule for selective hemoglobin binding over the direct adsorption method. Results by the sandwich immunoassay showed a linear correlation within the clinically relevant range 5–20% (CV < 3). For sensor application the immobilization procedure of haptoglobin onto CDI-activated cellulose membranes was optimized.     

Direct electrochemistry and enzymatic activity of hemoglobin in positively charged colloid Au nanoparticles and hemoglobin layer-by-layer self-assembly films

Alternate adsorption of positively charged colloid-Au nanoparticles (nano-Au⊕) and negatively charged hemoglobin (Hb) on L-cysteine (L-cys) modified gold electrode resulted in the assembly of {Hb/nano-Au⊕}n layer-by-layer films/L-cys modified gold electrode. The nano-Au⊕ was characterized by transmission electron micrograph (TEM) and microelectrophoresis. The modified electrode interface morphology was characterized by electrochemical impedance spectroscopy (EIS), atomic force mi- croscopy (AFM), cyclic voltammograms (CV) and chronoamperometry. Direct electron transfer between hemoglobin and gold electrodes was studied, and the apparent Michaelis-Menten constant ( km app) of the modified electrode was evaluated to be 0.10 mmol·L?1. Moreover, the higher activity of proteins in the nano-Au⊕ films could be retained compared with the electropolymerization membrane, since the pro- teins in nano-Au⊕ films retained their near-native structure. Direct electron transfer between hemoglo- bin and electrode and electrochemically catalyzed reduction of hydrogen peroxide on a modified elec- trode was studied, and the linear range was from 2.1×10-8 to 1.2 ×10?3 mol·L-1 (r = 0.994) with a detection limit of 1.1×10-8 mol·L-1 H2O2.     

纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.     

Influences of Triton X-100 on Hemoglobin Behaviors in Hemoglobin/Acyclovir/Triton X-100/H2O System

The influences of Triton X-100 on hemoglobin （Hb） behaviors were studied by the methods of UV-Vis spectrum, fluorescence spectrum, HPLC, conductivity, zeta potential and negative-staining transmission electron microscope in Hb/acyclovir/Triton X-100/H2O system. With the increase of Triton X-100 concentration in the system, the percentage of the free acyclovir increased from 58%--63% to 90%--94%. The static quenching constant and the association number of acyclovir to Hb decreased. The fluorescence spectrum, conductivity, zeta potential, fluorescence polarization and negative-staining morphology of Hb tended to recover to those of the original state of Hb in the same concentration of Hb. The interaction between Triton X-100 and Hb is stronger than that between acyclovir and Hb. Most Triton-X-100 was associated with Hb at low Triton X-100 concentration. But the interaction of Triton X-100 with Hb was apparently dominant in high Triton X-100 concentration. The Hb structure was unfolded and finally denatured.     

Synthesis and crosslinking of cyano-substituted polyamides and polyimides prepared from 1-(2,2-dicyano-1-hydroxyviyl)-3,5-diaminobenzene,sodium salt

3,5-Dinitrobenzoyl chloide was condensed with malononitrile in the presence of sodium hydroxide under phase-transfer conditions to afford 1-(2,2-dicyano-1-hydroxyvinyl)-3,5-dinitrobenzene, sodium salt, which was catalytically hydrogenated to the corresponding diamine. The latter was used as starting material for the preparation of unsaturated cyanosubstituted polyamides and polyimides. The polymers were soluble in polar aprotic solvents, dilute sodium hydroxide, and certain strong inorganic and organic acids. Upon curing at 300°C for 65 h, crosslinked polymers were obtained that were stable up to 392–404°C in N₂ or air and afforded an anaerobic char yield of 60–71% at 800°C. Their glass transition temperatures as determined by thermal mechanical analysis (TMA) were 221–275°C. © 1995 John Wiley & Sons, Inc.     

Increased viscosity of erythrocyte suspension upon hemolysis

Viscous properties of partially hemolyzed erythrocyte suspensions were studied with a cone-plate viscometer. A Casson plot was successfully applied for analysis of the viscous properties. When the degree of hemolysis was increased, Casson viscosity ( _c) of the partially hemolyzed erythrocyte suspensions increased, but the substitution of hemoglobin solution with the same O₂-carrying capacity of hemolyzed fraction (containing ghost) reduced the _c remarkably. The yield stress (f _c) of the intact erythrocyte suspension increased with increasing hematocrit, but thef _c of partially hemolyzed erythrocyte suspension was dependent on both hematocrit and the degree of hemolysis. The apparent viscosity ( _a) of erythrocyte suspension was drastically increased with the slight hemolysis, and became maximum at a certain degree of hemolysis which was dependent on both total hemoglobin concentration and shear rate. Such influence of hemolysis on the _a was also evident in the mixture of erythrocyte suspension and hemoglobin solution. These results suggest that the hemoglobin molecule plays a certain role in erythrocyte-erythrocyte interaction in their suspension, which modifies the viscosity.     

Oxidation of dibenzothiophene catalyzed by heme-containing enzymes encapsulated in sol-gel glass

We have encapsulated several hemoproteins in the sol-gel glass to catalyze the oxidation reaction of dibenzothiophene (model for organic sulfur compounds in coal) with hydrogen peroxide. In addition to cytochrome c and myoglobin, which have previously been encapsulated in sol-gel glasses, two other hemoproteins, horseradish peroxidase and bovine blood hemoglobin, have now been successfully immobilized in sol-gel media with the retention of their spectroscopic properties. All four hemoproteins studied also demonstrate similar catalytic activities toward the oxidation of dibenzothiophene as compared with the results obtained with the proteins in solution. In the case of encapsulated cytochrome c, the more water-soluble S-oxide was obtained with much higher selectivity over the less water-soluble sulfone (S-oxide/sulfone = 7.1) as compared to what was obtained in the aqueous/organic medium (S-oxide/sulfone = 2.3). Because of the advantage of easy separation of the encapsulated proteins from the liquid reaction mixture, it is clear from these studies that the immobilization of active hemoproteins in the solid glass media could serve as more practical biocatalysts.     

Highly crosslinked micron-range polymer microspheres by dispersion polymerization of divinylbenzene

Narrow disperse microparticles are formed by dispersion polymerization of commercial divinylbenzene in acetonitrile or ethanol solution in the presence of 2,2′-azobis(2-methylpropionitrile) initiator and polyvinylpyrrolidone stabilizer. The particles have average diameters between 1 and 9 μm depending on monomer concentration, solvent, and temperature. While the smaller particles are relatively smooth, surface texture increases with diameter to give popcorn shapes at 9 μm diameter. High crosslinker concentration is shown to be essential for particle formation. © 1993 John Wiley & Sons, Inc.     

新型大分子席夫碱配合物的合成和表征

本文用胺基封端聚四氢呋喃(Mn=862)与水杨醛反应，生成新型席夫碱遥爪配体，再与金属离子(Fe³⁺, Co²⁺, Cu²⁺)反应，得到新型大分子席夫碱配合物。用IR、ESR、UV、循环伏安法、拉伸和动态粘弹谱等表征手段对配合物进行了研究。证明所得配合物的配位结构与血红蛋白分子的功能片段的配位结构相似，钴配合物具有与血红蛋白分子相近的可逆化学吸附功能。