Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Mechanical properties of SBR-networks: I. Determination of crosslink densities by stress-strain-measurements

The tube model is applied for the treatment of stress-strain measurements on SBR networks. It is shown that this theory allows the separation of crosslink and constraint contributions to the stress-strain behavior and, also, a reliable determination of crosslink densities. The consideration of dynamical contributions is discussed and a special numerical method is developed.     

羧基丙烯酸酯涂料合成及其防雾性能研究

采用种子乳液聚合法合成了一种互穿网络型羧基丙烯酸酯类聚物乳液，研究了加料方式对羧基分布的影响，结果表明丙烯酸加入到核单体中有利于羧基分布在乳胶粒表面。在体系中引入离子键交联结构提高了乳液涂料的硬度和耐水性能，离子键交联ＰＩＬＮ型涂料具有优良的防雾性能。     

Model networks of end-linked polydimethylsiloxane chains

Summary Elastomeric networks of high extensibility were prepared by end-linking mixtures of vinyl-terminated polydimethylsiloxane chains having molecular weights of approximately 600 and 11,000 g mol^–1, with silanes chosen to give junction functionalities ranging from 3 to 8. The resulting bimodal networks were studied in elongation, at 25 °C, to their rupture points, and in swelling equilibrium in benzene at room temperature. The elongation moduli [f ^*] were found to be in satisfactory agreement with previous results obtained by end-linking hydroxyl-terminated polydimethylsiloxane chains. Values of [f ^*] at low and moderate deformations gave relatively low values of the ratio of elasticity constants 2C ₂/2C ₁, which is a measure of the extent to which the elongation changes from approximately affine to nonaffine as the elongation increases. The low values obtained for this ratio are presumably due to diminished interpenetration of configurational domains in the case of very short chains. In spite of its small magnitude, 2C ₂/2C ₁ does show some decrease with increase in , as predicted by the recent molecular theory of rubberlike elasticity developed by Flory. The swelling equilibrium results were also found to be in satisfactory agreement with theory. The elongation moduli increased significantly at high elongations, and the values of the elongation at which the upturn was first discernible were very nearly independent of , This is consistent with the interpretation of this anomalous behaviour in terms of limited chain extensibility. The maximum extensibility generally decreased somewhat with increase in and this caused a decrease in both the ultimate strength and the toughness of the elastomer, as measured by the energy required for rupture.     

On the Effect of Organic Substitution of Silicon Alkoxides in Poly(Vinyl Acetate) Organic-Inorganic Composites

Abstract

Organic-inorganic composites (OICs) were prepared via the in-situ polymerization of an organically (phenyl) substituted trialkoxysilane, phenyltriethoxysilane (PhTEOS), in the presence of poly(vinyl acetate) (PVAc). The mechanical reinforcement above T _g previously observed in OICs of unfunctionalized organic polymers such as PVAc with acid catalyzed in-situ polymerized tetraalkoxysilane was not observed when the tetraalkoxysilane was replaced with PhTEOS. Although both systems are optically transparent and both exhibit a high degree of hydrogen bonding between the carbonyl of PVAc and the residual hydroxyls of the silicate, the polymerization of the alkoxide is different. The tetra-functional alkoxide polymerizes to form a load-supporting silicate network, leading to a high plateau in the tensile modulus above T _g, whereas the trifunctional alkoxide reacts to form primarily low molecular weight oligomers. These increase the T _g of the PVAc but do not provide mechanical reinforcement.     

How good is CuAAC “click” chemistry for polymer coupling reactions?

¹H NMR and SEC analyses are used to investigate the overall efficiency of Copper Catalyzed Azide Alkyne Cycloaddition (CuAAC) “click” coupling reactions between alkyne‐ and azide‐terminated polymers using polystyrene as a model. Quantitative convolution modeling of the entire molecular weight distribution is applied to characterize the outcomes of the functional polymer synthesis reactions (i.e., by atom transfer radical polymerization), as well as the CuAAC coupling reaction. Incomplete functionality of the azide‐terminated polystyrene (∼92%) proves to be the largest factor compromising the efficacy of the CuAAC coupling reaction and is attributed primarily to the loss of terminal bromide functionality during its synthesis. The efficiency of the S_N2 reaction converting bromide to azide was found to be about 99%. After taking into account the influence of non‐functional polymer, we find that, under the reaction conditions used, the efficiency of the CuAAC coupling reaction determined from both techniques is about 94%. These inefficiencies compromise the fidelity and potential utility of CuAAC coupling reactions for the synthesis of hierarchically structured polymers. While CuAAC efficiency is expected to depend on the specific reaction conditions used, the framework described for determining reaction efficiency does provide a means for ultimately optimizing the reaction conditions for CuAAC coupling reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 75–84     

An Investigation into the Migration of Segments in Crosslinked Fluorinated Polyimide Adhesive

Crosslinked fluorinated polyimides (CFPI) were successfully synthesized to study and explore the effect of cross-linkage on the migration of fluorinated segments and on the adhesion strength. Characterization by dynamic thermomechanical analysis (DMA) and thermo gravimetric analysis (TGA) confirmed good thermal properties of CFPI. X-ray photoelectron spectroscopy (XPS) results showed that the ratio of fluorinated component (6FDA-ODA) concentration of the surface to the bulk decreased with the crosslink density. The water contact angle of CFPI was lower than that of non-crosslinked fluorinated polyimide, indicating that the migration of fluorinated groups to the surface was reduced by the presence of cross-linkage. Therefore, CFPI, with no fluorine segregation on the surface, exhibited excellent wetting of adherent surfaces and adhesion strength, which was proved by lap shear strength (LSS) measurements and scanning electron microscopy.     

Amplitude Modes in Mixed Polymers Trans [C2H2)y(C2D2) 1-y]x

Resonant Raman Scattering and doping induced IR absorption are explained in terms of amplitude modes of the 1-d gap. The RRS frequencies and relative intensities of the renormalized phonon lines at the various concentrations are readily obtained.     

Complex new materials from simple chemistry: Combining an amino‐substituted polysiloxane and carboxylic acids

Changes in rheological, adhesive, and swelling properties of quaternary salts, made by adding one of eight mono‐ or six α,ω‐alkanedioic acids (the latter with two to six or nine carbon atoms) to 6‐7PSil (a polysiloxane with 6%–7% of the monomer units contain a 3‐aminopropyl group) have been correlated with the salt structures. The simple acid‐base chemistry initiates drastic changes in the bulk properties of the materials that depend on the amount and type of the added acid. Thus, the quaternized forms of the 6‐7PSil have significantly enhanced viscoelastic and adhesive properties compared to those of the initial polysiloxane, and they can swell selectively liquids based on their polarity. Also, interpenetrating networks have been made in situ by photopolymerization of salts with vinylic carboxylic acids. DFT calculations on model systems consisting of dimethylammonium α,ω‐alkanedioate salts with two to six carbon atoms provide insights into the interactions responsible for the unexpected dependence of the properties of the 6‐7PSil salts on the chain lengths of the diacids. The potential for applying the methodologies described here to systems with other amino‐substituted polymers and other acid types is noted. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3851–3861