Determination of ultra-trace gold in natural water by graphite furnace atomic absorption spectrophotometry after in situ enrichment with thiol cotton fiber

A simple method of determining ultra-trace Au in natural water was presented by using graphite furnace atomic absorption spectrophotometry (GFAAS) after in situ enrichment with thiol cotton fiber (TCF). The sample solution was adjusted to pH 1.5-2.0 with HCl, then the water sample was passed through a column packed with 0.10-0.20 g TCF and the flow rate was controlled at 20-40 ml min⁻¹. The effects of interferences, such as complexing and oxidizing agents and other elements adsorbed on TCF were overcome by chemical treatments prior to the desorption of Au. The adsorbed Au was adsorbed with 2.0 ml hot acid, then it was extracted with 1.00 ml methyl isobutylketone (MIBK). For a 5 l water sample, the detection limit of Au is 0.02 ng l⁻¹. The relative standard deviation (R.S.D.) for the determination of 1.44 ng l⁻¹ Au was 9.4%.The method was applied to determine ultra-trace Au both in suspended phase and soluble phase in natural water, the concentrations of total Au in natural water samples range from 0.51 to 67.82 ng l⁻¹. The recovery of added 0.50-6.00 ng l⁻¹ Au was 80-95%. The method is useful in prospecting for Au deposits by means of hydrogeochemical methods. The enrichment is carried out in the field, and then the determination of Au is completed later in the laboratory.     

Electrophoretic study of the effect of ultradisperse iron powder on cotton seed proteins

The protein composition of seeds treated with a suspension of ultradisperse iron was studied using electrophoresis on PAAG. Changes were noted in the fractions with relative electrophoretic mobility (REM) 0.11 of water-soluble and REM 0.37 of buffer-soluble An-9 cotton seed proteins. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 384–385, July–August, 2006.     

Photon interaction studies using 241Am γ-rays

We have carried out some photon interaction measurements using 59.54 keV γ-rays from a ²⁴¹Am source. These include γ attenuation studies as well as photoelectric absorption studies in various samples. The attenuation studies have been made using leaf and wood samples, samples like sand, sugar etc., which contain particles of varying sizes as well as pellets and aqueous solutions of rare earth compounds. In the case of the leaf and wood samples, we have used the γ-ray attenuation technique for the determination of the water content in fresh and dried samples. The variation of the attenuation coefficient with particle size has been investigated for sand and sugar samples. The attenuation studies as well as the photoelectric studies in the case of rare earth elements have been carried out on samples containing such elements whose K-absorption edge energies lie below and close to the γ-energy used. Suitable compounds of the rare earth elements have been chosen as mixture absorbers in these investigations. A narrow beam good geometry set-up was used for the attenuation measurements. A well-shielded scattering geometry was used for the photoelectric measurements. The mixture rule was invoked to extract the values of the mass attenuation coefficients for the elements from those of the corresponding compounds. The results are consistent with theoretical values derived from the XCOM package.     

鲁米诺-双氧水-铬(Ⅲ)化学发光体系测定化探样品中痕量砷

用鲁米诺－双氧水－铬（Ⅲ）化学发光体系结合巯基棉对Ａｓ（Ⅲ）的富集分离，建立了快速的测定化探样品中痕量砷的新方法，检测线性范围为１．０×１０－４～１．０×１０１ｍｇ／Ｌ，检出限为３．４×１０－５ｍｇ／Ｌ。用于实际化探样品测定，相对标准偏差为５．５％～９．０％。     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

青海柴达木地区植物白刺叶中微量元素特征

青海柴达木地区分布有丰富的白刺植物资源。利用220FS原子吸收光谱仪分析了该地区三种白刺叶片的Cu,Zn,Fe,Mn,Cr,Ni,Cd等微量元素。结果表明，铬、 锰含量显著提高是青海柴达木地区植物白刺叶资源微量元素特征。这为柴达木地区白刺叶资源的开发利用提供科学依据。     

高效液相钴离子催化化学发光抑制法测定茶叶中的茶氨酸

 研究了用高效液相分离、抑制化学发光测定茶叶中茶氨酸的分析方法。该法采用YWG C18(10μm,250mm×5 0mmi d )柱,以0 01mol·L-1醋酸钠 醋酸缓冲液(pH5 5)为流动相,流速为0 8mL·min-1。对茶氨酸抑制Co2+催化鲁米诺(luminol)与过氧化氢(H2O2)化学发光反应的条件进行了优化:Co2+的质量浓度为2μg·L-1,鲁米诺浓度为0 25mmol·L-1,H2O2浓度为0 5mmol·L-1。在茶氨酸的质量浓度为0 2g·L-1～5 0g·L-1时,茶氨酸抑制化学发光产生负峰的相对峰面积Y(将实际峰面积缩小至万分之一)与其质量浓度X(kg·L-1)的线性回归方程为Y=33862X+1 0605(r=0 9983)。     

Free-Radical Gossypol Derivatives for Cotton Verticillium Wilt

The ability to bind reversibly molecular oxygen was established for a free-radical product of gossypol oxidation. Conversion of dianhydrogossypol into the stable biradical dioxodianhydrogossypol was viewed as the reason for interruption of the gossypol redox conversion cycle in the extracellular milieu of cotton steles.     

微量元素叶面肥料中硼的测定

研究了在 pH 6 .5乙酸铵缓冲溶液中 ,硼与 3 甲氧基 甲亚胺H的显色反应条件 ,最大吸收在 4 2 0nm处 ,摩尔吸光系数为 8.1× 10 3,硼含量在 0～ 10 μg/ 10ml范围内符合比耳定律。用于微量元素叶面肥料中硼的测定 ,获得了与国标法一致的结果     

Hydrophobicity modification of woven cotton fabric by hydrophobic fumed silica coating

Water repellency of woven cotton fabric was achieved by coating with the aqueous dispersion containing organosilane agent (HDTMS) and fumed silica. The coating agents were applied using padding method and then followed by batching the coated fabric at the ambient temperature for 24 h to allow the condensation reaction between HDTMS silanol group and fumed silica silanol group, rendering silica particles hydrophobic. An ultrasonicator was employed to prepare the homogenous coating dispersion. The water repellency evaluated by water contact angle determination which showed the contact angle over 110° was obtained with low amount of applied HDTMS of 1 wt%. The effect of fumed silica addition on an increase in fiber surface roughness geometry showed the influential result in improving the water contact angle. From durability to washing test, the hydrophobic coatings evidenced from SEM and ATR/FTIR remained adhering to fiber surface, indicating the durability. After washing, the coating on the fabric with fumed silica addition appeared to be scatter particles which made a contribution to the higher contact angle value when compared to sheet-like layer coating in case of HDTMS coating alone.