Influence of the Type of a Ligand on the Intensity of Luminescence of Ln3+ Ions in Aqueous Solutions

The luminescence characteristics of hydrated Ln³⁺ ions and their complexes with some acidic ligands have been investigated. The possibility of determining the stability of the complexes of lanthanides in solutions from the intensity of luminescence bands is shown. The influence of the characteristic features of the f-electron shell of Ln³⁺ on the formation of the spectrochemical series is discussed.     

复方单硝酸异山梨酯-阿司匹林双缓释微丸胶囊的研制(Ⅱ)

以乙基纤维素、丙烯酸树脂Ⅱ和丙烯酸树脂Ⅲ为骨架材料分别制备单硝酸异山梨酯和阿司匹林混合骨架缓释微丸，并通过包薄膜衣进一步控制药物的释放。通过测定微丸的释放度对处方工艺进行评价，选择最佳微丸灌装胶囊．胶囊中两种药物均达到良好的缓释效果。符合中国药典对缓释制剂的要求．其体外释放过程同时符合Higuchi方程和一级释药方程，R^2值均在0．995以上。     

抗肿瘤药物氮三乙酰肼和金属离子配位能力的研究

本文研究了抗癌药物氮三乙酰肼(Nitrilotriacetic hydrizide,NTH)和生命必需元素以及Al~(3 ),Ga~(3 ),In~(3 )的配位能力并用pH电位法测定了它们在生理条件下(37℃,Ⅰ=150mM dm~(-3)NaCl)的配合物生成常数。电位滴定数据是用ZPLOT,MINIQUAD,ESTA等计算机程序处理的。实验结果表明NTH与它的非生理活性的母体化合物氮三乙酸相比较,对Zn~(2 ),Mn~(2 )等过渡元素的配位能力表现较大的差异性。这种情况在Revercan,ICRF-198,ICRF-236和5-烯去甲基斑蝥酸等其他抗肿瘤活性化合物中也曾观察到。 NTH与三价金属Fe~(3 ),Ga~(3 ),Al(3 )和In~(3 )等有较大的配位能力,这与它的烯醇式结构有关。由于这些配合物在广泛的pH范围内生成,以及它的高稳定性,因此有可能被用作为肿瘤定位试剂或生物体营养元素铁传输的有效载体。     

Metallic Particles from Complexing Microcapsules Dispersed in a Silica Gel

A new process to control the distribution of metal nanoparticles is proposed. It involves the use of complexing microcapsules obtained by interfacial polycondensation. The latter are hollow spheres constituted of a polymer membrane, containing an insoluble active ingredient, such as a polyacrylic acid, which can complex Co²⁺ ions. These capsules are dispersed in a silica sol followed by thermal treatments and reduction under H₂ which results in metallic Co nanoparticles confined in the capsules domains. The particles do not diffuse in the matrix.     

Selective formation of heterodimeric resorcinarene capsules

C_2V-symmetrical resorcinarene tetraesters 1 form in CDCl₃ dimeric capsules encapsulating one Me₄N⁺ cation. The homodimeric capsules of the tetra(3,4,5-trimethoxybenzoate) 1d and tetrabenzoate 1b or tetrafuroylate 1c disproportionate in solution to give quantitatively the heterodimers. The higher stability of the heterodimer is, most probably, caused by π-π attractions between the π-basic trimethoxyphenyl rings of 1d and relatively more π-accepting phenyl or furyl fragments of 1b or 1c.     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

Synthesis and Characterization of Core‐Shell Selenium/Carbon Colloids and Hollow Carbon Capsules

A novel Se/C nanocomposite with core‐shell structures has been prepared through a facile one‐pot microwave‐induced hydrothermal process. The new material consists of a trigonal‐Se (t‐Se) core and an amorphous‐C (a‐C) shell. The Se/C composite can be converted to hollow carbon capsules by thermal treatment. These products were characterized by transmission electron microscopy (TEM), powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), selected area electron diffraction (SAED), energy‐dispersive X‐ray (EDX) spectroscopy, and X‐ray photoelectron spectroscopy (XPS).     

阿斯美胶囊中四种组分的高效液相色谱分析

建立了反相高效液相色谱法测定阿斯美胶囊中氨茶碱、盐酸甲氧非那明、马来酸氯苯那敏及那可汀四种组分的含量。色谱柱为ＳｐｈｅｒｉｓｏｒｂＣ８，５μｍ，２００ｃｍ×４０ｍｍＩＤ，流动相为体积分数０５％的三乙胺溶液（磷酸调节ｐＨ５５）＋乙腈＋甲醇（５５０＋３６８＋８２），检测波长为２６４ｎｍ，线性范围分别为：氨茶碱３１２５～２５０ｍｇ／Ｌ，γ＝０９９９６，盐酸甲氧非那明１５６２５～１２５０ｍｇ／Ｌ，γ＝１００００，马来酸氯苯那敏２５～２００ｍｇ／Ｌ，γ＝０９９９９，那可汀８７５～７００ｍｇ／Ｌ，γ＝０９９９９；回收率（ｎ＝３）分别为１０１２％，１００８％，９９９％，９９５％；精密度：日内平均ＲＳＤ（ｎ＝６）分别为０７％，０４％，０４％，０６％；日间平均ＲＳＤ（ｎ＝３）分别为１０％，１０％，１１％，１２％。     

The drawing behavior of Y-Ba-Cu-O sol from non-aqueous solution by a complexing process

A complexing process is developed to prepare Y-Ba-Cu-O superconducting fibers. The process is not identical to typical sol-gel processes; here the resulting gel network is built up by hydrogen bonding linkage among complexing species in non-aqueous solution. Cu acetate, [Cu(OAC)₂], Ba methoxyethoxide [Ba(ORE)₂] and Y acetate [Y(OAC)₃] are used as precursors for preparing homogeneous gels while -methacrylic acid (HOAA) and diethylenetriamine (DETA) as complexing agents, and methoxyethanol (REOH) as solvent. Fibers drawn from a sol obtained through reduced pressure present no or little deformation at 80°MoC via adjusting the amount of DETA and HOAA. Cu(OAC)₂, Ba(ORE)₂ and Y(OAC)₃ in the complexing process have been demonstrated to form gels without hydrolysis and condensation at ambient atmosphere. The relationships between the drawing behavior of sols and gel structure with different amounts of DETA and HOAA are suggested. The concentration region of drawing the gel fibers with no or little deformation heated at 80°MoC is also found.