The use of TG-FTIR technique for the assessment of hydrogen bromide emissions in the combustion of BFRs

The TG-FTIR technique was used in the present study to investigate the thermal degradation behaviour of materials containing brominated flame retardants under fire conditions. Time-temperature profiles and oxygen concentrations typical of selected fire scenarios were reproduced in the thermogravimetric analyzer, while the characterization of the gaseous products generated was performed by the simultaneous FTIR analysis. FTIR analysis combined with the use of specific calibration procedures allowed the quantitative estimation of the gaseous products evolved as a function of experimental conditions. The results obtained allowed the straightforward assessment and the comparison of the quantities of hydrogen bromide formed in the oxidation and thermal degradation of pure brominated flame retardants and of flame retarded materials of industrial interest. Hydrogen bromide yields resulted dependent on the experimental conditions used, such as oxygen concentration and heating rate. Although TG-FTIR experiments only provide a representation of the actual heterogeneous combustion products in real fire conditions, the coupled TG-FTIR technique proved to be a straightforward experimental methodology allowing one to obtain reference data on the nature and quantities of the macropollutants generated in a fire. This revised version was published online in July 2006 with corrections to the Cover Date.     

A New Brominated Phenylpropylaldehyde and its Dimethyl Acetal from Red Alga Rhodomela confervoides

A new brominated phenylpropylaldehyde and its dimethyl acetal together with a new natural brominated phenol were isolated from Rhodomela confervoides. Their structrues were elucidated as 2-methyl-3-(2,3-dibromo-4,5-dihydroxyphenyl)propylaldehyde, 2-methyl-3-(2,3-di-bromo-4,5-dihydroxyphenyl) propylaldehyde dimethyl acetal and 3-bromo-4,5-dihydroxybenzoic acid methyl ester by spectroscopic techniques including IR, HRFABMS, 1D and 2DNMR experiments.     

Monitoring and Statistical Analysis of Formation of Organochlorine and Organobromine Compounds in Drinking Water of Different Water Intakes

The main drawback of drinking water chlorination involves the formation of quite hazardous disinfection by-products (DBPs), represented mainly by halogenated species. Based on the authors’ monitoring data since 2002, the prevalence of chlorine over bromine in the composition of volatile DBPs was shown for the drinking water in Ufa (Russia). However, the situation was completely reversed in the case of semi-volatile DBPs. The principal goal of the present study involved rationalization of the results of the long-term monitoring. Gas chromatography–mass spectrometry (GC-MS) was used for the qualitative and quantitative analysis of volatile DBPs. Identification of semi-volatile compounds was carried out with GC-MS, while gas chromatography with an atomic emission detector (GC-AED) was used for their quantification. A significant contribution of oxygen to the composition of semi-volatile compounds proves the decisive role of the dissolved organic matter oxidative destructive processes. Statistical analysis revealed notable linear correlations for trihalomethane and haloacetic acid formation vs. chlorine dose. On the contrary, halogenated semi-volatile products do not demonstrate any correlations with the water quality parameters or chlorine dose. Principal component analysis (PCA) placed them into separate groups. The results allow for proposing that formation of the organohalogenated species involved the fast penetration of bromine into the humic matter molecules and, further, their oxidative destruction by active chlorine.     

Polybrominated diphenyl ethers (PBDEs) in marine sediment of Thermaikos Gulf,Greece

Polybrominated diphenyl ether (PBDE) concentrations were determined in marine sediment samples collected from 7 different locations around Thermaikos Gulf in north Greece. PBDEs were detected in all sampling sites and their average total concentration (ΣPBDEs) ranged from 0.26 to 4.92?ng?g^?1?d.w. Concentrations were an order of magnitude higher in locations outlining the inner part of the Gulf, which were also closer to industrial areas, sewage treatment plant discharges, the city's harbour and landfill area. These findings suggest pollution in the aquatic ecosystem from industrial and urban activities in the area. Congener profiles exhibit predominance of BDE-209, while concentrations of other PBDE congeners were usually lower, when compared to similar studies from other countries globally, indicating that Thermaikos Gulf is among the low-polluted areas. Statistical analysis showed significant differences among the higher polluted sampling stations. Statistically significant differences also existed between sampling stations with high and low PBDE concentrations. Correlations between congeners suggested local contamination sources; however, specific point sources of pollution were not established.     

Effect of aromatic substitution on phase behavior of blends of halogenated polystyrene and conventional polystyrene

Miscibility phase behavior in blends of poly(bromostyrene) with polystyrene (PS) has been investigated by means of time‐resolved light scattering, optical microscopy, and DSC. Cloud point phase diagrams of blends of conventional PS with poly‐(2‐bromostyrene) (P2BrS), poly‐(3‐bromostyrene), and poly‐(4‐bromostyrene) of comparable molecular weights were established by light scattering. Of particular interest is the fact that ortho, meta, and para substitutions in the styrenic aromatic rings of poly(bromostyrene) show profound effects on the composition–temperature phase diagrams of their blends with PS, exhibiting a lower critical‐solution temperature (LCST), an upper critical solution temperature (UCST), and combined LCST/UCST diagrams, respectively. Poly‐(2‐chlorostyrene) exhibits an LCST behavior very close to that of the P2BrS blend, suggesting that these types of halogen atoms may be inconsequential to phase behavior. A similar study has been extended to a PS blend containing commercial brominated PS (66 mol % bromine substitution) to determine what location of bromine substitution is crucial for miscibility enhancement in the flame‐retardant brominated PS blends. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1605–1615, 2001     

Crystallization,Flame Retardancy and Mechanical Properties of Poly(Butylene Terephthalate)/Brominated Epoxy/Nano-Sb2O3 Composites Dispersed By High Energy Ball Milling

Nano-Sb2O3 particles and brominated epoxy resin (BEO) powders were dispersed in poly (butylene terephthalate) (PBT) by high energy ball milling (HEBM). Then the nanocomposites were prepared by a twin screw extruder. The influence of the nano-Sb2O3 particles on the crystallization, thermal stability, flame retardancy and mechanical properties of the PBT/BEO/nano-Sb2O3 composites were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limiting oxygen index (LOI), UL-94 tests and scanning electron microscopy (SEM). The results showed that the nano-Sb2O3 particles improved the crystallizability, thermal stability and flame retardancy properties of the PBT/BEO/nano-Sb2O3 composites. When the content of nano-Sb2O3 particles was 2.0?wt%, the LOI of nano-Sb2O3/BEO/PBT composites increased from 22.0 to 27.8 and the tensile strength reached its maximum value (62.44?MPa), which indicated that the optimum value of flame retardancy and mechanical properties of PBT/BEO/nano-Sb2O3 composites were obtained.     

13C CP MAS NMR of halogenated (Cl,Br, I) pharmaceuticals at ultrahigh magnetic fields

This work reports significantly improved spectral resolution of ¹³C CP MAS NMR spectra of chlorinated, brominated and iodinated solid organic compounds when such spectra are recorded at ultrahigh magnetic field strengths. The cause of this is the residual dipolar coupling between carbon atoms and quadrupolar halogen nuclides (chlorine‐35/37, bromine‐79/81 or iodine‐127), an effect inversely proportional to the magnetic field strength which declines in importance markedly at 21.1 T as compared to lower fields. In favorable cases, the fine structure observed can be used for spectral assignment, e.g. for Cl‐substituted aromatics where the substituted carbon as well as the ortho‐carbons show distinct doublets. The experimental results presented are supported by theoretical modeling and calculations. The improved spectral resolution in the studied systems and similar halogenated materials will be of particular interest and importance for polymorph identification, drug discovery and quality control in the pharmaceutical industry. Copyright © 2009 John Wiley & Sons, Ltd.     

Viscometric Analysis of Miscibility and Interactions for Binary,Ternary Polycarbonate/Brominated Polystyrene + Chloroform Systems at Different Temperatures

Viscosities of ternary systems consist of polycarbonate (PC)/brominated polystyrene (PBrS) in chloroform and their corresponding binary systems were measured at different temperatures (20, 25, and 30°C). All the measurements were carried out at the concentration ranges of 0.1–0.6 g·dL^?1. The mass ratio of PC to PBrS was selected as 75:25, 50:50, and 25:75 in the ternary solutions. Two empirical expressions of Huggins and Kraemer equations with three-parameters were used for reproducing of the experimental viscosity data. The fitting parameters were obtained for the corresponding temperatures. The miscibility criteria on the basis of the sign of Δ[η]_m based on the difference between experimental and ideal values of [η]_m, was calculated by applying the Garcia et al., theoretical equation. The effect of temperature on the viscosity data was also studied. The results from this method were correlated with the miscibility data obtained for the same system by differential scanning calorimeter (DSC) findings.     

Azido chelating fiber: synthesis,characterization and adsorption performances towards Hg2+ and Pb2+ from water

Herein, we report the synthesis and adsorption property of a novel chelating fiber containing azido group. Firstly, the brominated fiber (PP‐St‐DVB‐Br) was obtained via the reaction of polypropylene‐(g)‐styrene‐divinylbenzene fiber (PP‐St‐DVB) with bromine in CH₂Cl₂ solution. Then, azido chelating fiber (PP‐St‐DVB‐N₃) was prepared by azidation of PP‐St‐DVB‐Br fiber. Its structure and properties were characterized by Fourier transform infrared, elemental analysis, thermogravimetric analysis, and chemical titration, respectively. The micromophology and functional group distribution in fibrous matrix were investigated by scanning electron microscopy‐energy dispersive spectroscopy. The results show that the chelating fiber has high functional group contents (2.11 mmol/g for PP‐St‐DVB‐N₃) and uniform distribution. Different from granulate chelating resin, the novel fibrous adsorbent possesses excellent adsorption ability for Hg(II) and Pb(II) ions (408.9 mg/g for Hg²⁺ and 334.4 mg/g for Pb²⁺), and the adsorption capacity of the fiber has no loss until five cycles. The novel absorbent material shows the potential application prospect in the treatment of heavy metal wastewater. Copyright © 2017 John Wiley & Sons, Ltd.     

Effect of AlN content on the performance of brominated epoxy resin for printed circuit board substrate

Polymer matrix composites, based on brominated epoxy, a type of material widely used in printed circuit boards (PCBs), as matrix and AlN particle as filler were prepared. The influences of AlN content on the mechanical, thermal, and electrical properties of the composites were investigated by uniaxial tensile test, TMA, thermal conductivity measurement, DMA, and dielectric properties measurement. It was found that the properties of composites monotonically varied with AlN content except that maximum tensile strength and strain of composites corresponded to a filler content of 10 wt %. The results of DMA also showed the AlN reinforcement was more pronounced above T_g, and the peak area of tan δ versus T curves decreased with AlN content, which implied the damping capacity of the composite gradually decreased. The increase in T_g and decrease in damping were probably due to strong interaction between the AlN and epoxy matrix inhibiting the mobility of the epoxy chain. In addition, different theoretical models reported in the literature were used to predict the E, CTE, k, and D_k, and compared with the experimental data. Finally, suitable models were recommended in the present materials system. For the significant improvement of performance of epoxy, we can conclude that these composite materials may be promising for PCB substrate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1662–1674, 2007