Determination of the Onset of Asphaltene Precipitation by Visible Ultraviolet Spectrometry and Spectrofluorimetry

Abstract

Asphaltene deposition is a problem for the petroleum industry, affecting the production, transport, and storage of crude oil. The aim of this work is to develop and compare different methods to determine asphaltene precipitation. Two asphaltene fractions, one extracted from a Brazilian crude oil sample and the other from petroleum distillation residue, were evaluated by using model systems constituted of toluene/n-heptane in different compositions, using visible ultraviolet spectrometry and spectrofluorimetry. The results of the precipitation tests carried out by these two methods agreed, indicating they are effective to analyze asphaltene deposition and the performance of chemicals as asphaltene stabilizers.     

Noble metal nanoparticles functionalized by natural asphaltenes as model phases for geochemical research

1. Download : Download high-res image (212KB)
2. Download : Download full-size image

     

Composition of petroleum asphaltenes derived from ruthenium-catalyzed oxidation

Ruthenium ion-catalyzed oxidation of methanonaphthene oil (Krapivinskoye oilfield) revealed that its high molecular asphaltenes contain aromatic–aliphatic bridges and non- covalently bound (occluded) compounds. Covalently bound fragments are represented by C₅–C₁₈ n-alkanes, aromatic biphenyl-type structures, and naphthalenes located in the peripheral part of asphaltene molecules. Typical biological markers, i.e. terpanes, steranes, and n-alkanes have been identified among the occluded compounds.     

石油沥青质含硫结构的XANES导数光谱研究

采用X射线近边结构谱(XANES)研究沥青质中硫的存在形态,针对沥青质的未知复杂混合体系特性,采用高阶导数谱图分析方法,提高XANES的分辨率,准确分析沥青质中硫的存在形态;采用反正切和高斯函数分峰拟合、定量解析谱图,针对不同氧化态硫3p轨道空余状态不同引起1s→3p跃迁几率不同,提出峰面积修正因子,以准确分析体系中各形态硫的相对含量。结果表明,石油沥青质中硫主要存在形式为硫醚、噻吩、亚砜、噻吩砜和硫酸酯,常减压渣油沥青质中基本不含硫醚。     

Influence of Interfacial Rheological Properties on Stability of Asphaltene-Stabilized Emulsions

A series of oscillating droplet measurements have been performed on asphaltenes at the oil/water interface, in order to correlate the interfacial rheological behavior to their ability to stabilize emulsions. In the concentration sweep, the elastic modulus goes through a maximum around an asphaltene concentration of 0.05–0.10 g/l. This behavior was not in good correspondence with emulsion stability, which increased consistently from low to high concentrations. The decrease above 0.10 g/l was most likely an effect of diffusion of asphaltenes in the bulk to the interface, which became more significant at higher bulk concentrations. The rheology data as a function of concentration has been fitted to Butler's surface equation of state and the Lucassen–van den Tempel model. A decent correlation was found between emulsion stability and elasticity for both the effect of solvent aromaticity and pH. The elastic modulus displayed a gradual increase when xylene was mixed with heptane as the solvent, as was seen with emulsion stability. This was not caused by a significant increase of the adsorbed amount of asphaltene at the interface, as shown by a quartz crystal microbalance (QCM), but a more efficient reorganization of the already adsorbed asphaltenes. The ability asphaltenes displayed in stabilizing emulsions was significantly increased at both low and high pH, according to a previous study. The elastic modulus, on the other hand, only showed a very weak increase at pH 2, but a better correlation with emulsion stability above pH 8. From this it would appear that the dissociation of acid groups in the asphaltene structure at high pH has a bigger impact on the interfacial activity than the protonation of bases at low pH, while their effect on emulsion stability was the same.      

Usage of the Y-Rule and the Effect of the Occurrence of Heteroatoms (N,S) on the Frontier Molecular Orbitals Gap of Polycyclic Aromatic Hydrocarbons (PAHs), and Asphaltene-PAHs

The understanding of the molecular- and colloidal-structure of asphaltenes has seen a major progress; however, there are still issues that require answer. One of them is the location of the heteroatoms in the polycyclic aromatic hydrocarbon (PAH) fused aromatic ring (FAR) region of asphaltenes. Therefore, the effect on the frontier molecular orbitals (HOMO-LUMO) energy-gap due to the addition of a heteroatom (N or S) to PAHs, which are candidates of the PAH region in asphaltenes, has been systematically analyzed by placing S or N in various sites of the PAH molecule. The S is introduced as a thiophenic ring in a bay region, while the N is introduced as a pyridinic-N, which are prevalent forms in the asphaltene-PAH. 174 PAHs are studied with five fused aromatic rings (5FAR) to 10FAR. The π-electron allocation in resonant π-sextets and isolated double bonds is obtained using the Y-rule. The frontier orbitals optical transition is calculated with the ZINDO/S method. Within a FAR family an increment of π-sextets produces and increase of the HOMO-LUMO energy-gap. There is a linear relationship between the Y-rule mapping (percentage of fraction of π-sextet bond divided by nFAR) and the HOMO-LUMO energy-gap. In addition, the effect on the frontier orbitals energy-gap and on the π-electronic allocation due to the presence of N and S is negligible; therefore, to reach conclusions related to the asphaltene-PAH based on conclusions reached for PAH systems, with no heteroatoms, is a reasonable approach.     

Laser desorption/ionization determination of molecular weight distributions of polyaromatic carbonaceous compounds and their aggregates

Molecular weight distributions (MWDs) of model polyaromatic hydrocarbons (PAHs) and complex asphaltene samples have been investigated in laser desorption/ionization mass spectrometry (LDI-MS) experiments. Special efforts are devoted to the characterization of aggregation effects during the desorption process. It is found that non-covalent clusters of the PAHs and asphaltenes form readily in the desorbing plume. Aggregation is favoured in the experiments performed on dense samples at high laser energy and under continuous ion extraction conditions. In the absence of polar groups in the analyte molecules, the aggregation propensity correlates well with the size of the polycondensed system and with its degree of pericondensation, in qualitative agreement with previous theoretical predictions. For the polydispersed asphaltenes from two different crude oils, MWDs peaking at masses smaller than 500 amu with a high-mass tail extending up to about 3000 amu have been observed, yielding average weights around 900 amu. Such MWDs are in good agreement with previous mass spectrometric measurement, as well as with diffusion studies in solution. In addition, stable asphaltene aggregates have been detected giving rise to two broad bands in the mass spectrum corresponding to average molecular weights of 2200-3100 amu and 15,000-19,000 amu, respectively. It is concluded that the strong aggregation propensity of asphaltenes is likely to be responsible for the apparent inconsistency between the MWD for these compounds determined by different groups in independent LDI-MS experiments. The reliability of different sample preparation procedures, including solvent-free methods, is discussed, and strategies are outlined that serve to apply the potentiality of LDI mass spectrometry to the characterization of covalent and non-covalent compounds in complex carbonaceous systems.     

Electrospray ionization for determination of non‐polar polyaromatic hydrocarbons and polyaromatic heterocycles in heavy crude oil asphaltenes

Electrospray ionization (ESI) is the most common ionization method in atmospheric pressure ionization mass spectrometry because of its easy use and handling and because a diverse range of components can be effectively ionized from high to medium polarity. Usually, ESI is not employed for the analysis of non‐polar hydrocarbons, but under some circumstances, they are effectively ionized. Polyaromatic hydrocarbons and aromatic heterocycles can form radical ions and protonated molecules after ESI, which were detected by Fourier transform ion cyclotron resonance mass spectrometry. The highly condensed aromatic structures are obtained from a heavy crude oil, and the results show class distribution from pure hydrocarbons up to more non‐basic nitrogen‐containing species. By using different solvent compositions [toluene/methanol (50/50 v/v), dichloromethane/methanol (50/50 v/v), dichloromethane/acetonitrile (50/50 v/v) and chloroform], the results show that the lack of proton donor agent helps to preserve the radical formation that was created at the metal/solution interface inside the electrospray capillary. The results demonstrate that with an appropriate selection of solvent and capillary voltage, the ratio between the detected radical ion and protonated molecule form can be manipulated. Therefore, ESI can be expanded for the investigation of asphaltene and other polyaromatic systems beyond the polar constituents as non‐polar hydrocarbons can be efficiently analyzed. Copyright © 2015 John Wiley & Sons, Ltd.     

渣油热反应体系中第二液相的存在性：Ⅱ.第二液相及其表征

对渣油热反应体系中出现的三类新相仿的凝聚态，溶解度类属以及相态性性的研究指出，它们都基本上是溶解度类属为正庚烷不溶－甲苯可溶的凝矣态沥青质，其非晶相结构特征或球形形态表明它们处于液相。     

Effect of Asphaltenes and Resins on Asphaltene Aggregation Inhibition,Rheological Behaviour and Waterflood Oil-Recovery

This study presents an investigation about the influence of resins and asphaltenes, extracted from two Mexican crude oils (light and heavy oil samples), on the asphaltene aggregation inhibition, rheological behavior, and waterflood oil-recovery. Resins and asphaltenes were characterized by means of elemental analysis, metals analysis by atomic absorption, ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, and electrospray ionization mass spectrometry (ESI-MS) in order to evaluate the effect of their structural parameters on the phenomena studied. Efficiency of the resins fraction as natural inhibitors of asphaltene aggregation was evaluated trough ultraviolet–visible (UV–vis) spectroscopy. Results showed better efficiencies of resins on asphaltene aggregation inhibition at resin/asphaltene (R/A) ratios close to unity and at high temperature. In addition, efficiencies were influenced by structural characteristics of the asphaltene–resin system. Rheological behavior of the heavy crude oil sample was significantly influenced by the presence of asphaltenes and resins. Finally, asphaltenes and resins played an important role on wettability and waterflood oil-recovery.