新型杀菌剂氟吗啉在黄瓜植株体内的吸收传导行为

利用生物测定技术和高效液相色谱法研究了氟吗啉在黄瓜植株体内的吸收、传导和分布行为及其机制. 结果表明, 氟吗啉能被黄瓜植株被动吸收, 并通过木质部在体内传导和分布.     

Analysis of acrylamide in coffee and dietary exposure to acrylamide from coffee

An analytical method for analysing acrylamide in coffee was validated. The analysis of prepared coffee includes a comprehensive clean-up using multimode solid-phase extraction (SPE) by automatic SPE equipment and detection by liquid chromatography tandem mass spectrometry using electrospray in the positive mode. The recoveries of acrylamide in ready-to-drink coffee spiked with 5 and 10 μg l⁻¹ were 96±14% and 100±8%, respectively. Within laboratory reproducibility for the same spiking levels were 14% and 9%, respectively. Coffee samples (n = 25) prepared twice by coffee machines and twice by a French Press Cafetière coffee maker contained 8±3 μg l⁻¹ and 9±3 μg l⁻¹ acrylamide. Five ready-to-drink instant coffee prepared twice contained 8±2 μg l⁻¹. Hence, the results do not show significant differences in the acrylamide contents in ready-to-drink coffee prepared by coffee machine, French Press or from instant coffee. Medium roasted coffee contained more acrylamide (10 μg l⁻¹) than dark roasted coffee (5 μg l⁻¹). Males aged 35–45 years, drinking on average 1.1 l coffee per day are exposed to the highest doses of acrylamide from coffee. The dietary intake of acrylamide from coffee comprises, on an average, 10 μg day⁻¹ for males and 9 μg day⁻¹ for females aged 35–45 years. Probabilistic modelling of the exposure of Danish consumers (all adults) to acrylamide from coffee shows a mean exposure of 6.5 μg day⁻¹ and a 95 percentile of 18 μg day⁻¹.     

Viscous flow in a mixed compression intake

Numerical simulation of the flow in a two‐dimensional mixed compression intake is carried out by solving unsteady viscous compressible equations using a stabilized finite element method. The effect of bleed in starting/unstarting of the intake and controlling the buzz instability is investigated in detail. Higher bleed leads to an increase in the ability of the intake to sustain larger back‐pressure for stable operation. The amount of bleed and its location is varied to understand its effect on the performance of the intake. Two kinds of unsteady oscillations are observed: ‘little’ and ‘big’ buzz. The frequency of the both kinds of buzz oscillations is found to be super‐harmonic of the fundamental acoustic frequency of intake modeled as an open‐closed organ pipe. The frequency as well as amplitudes of the big buzz cycles is larger than those of the little buzz. The little‐ and big‐buzz are found to occur for low‐ and high‐subcritical state of the intake and are very similar to Ferri and Dailey criteria, respectively. Buzz is eliminated when relatively high bleed is implemented, both, upstream and downstream of the throat. The effect of rate of change of back‐pressure on the start/unstart of the intake is investigated. Two situations are considered. The first case is that of an intake where the back‐pressure remains below the critical value. It is found that the intake remains started if the change in back‐pressure is gradual. However, it unstarts if the back‐pressure is changed relatively rapidly. The second set of simulations is an attempt to model the situation where the back‐pressure at the exit of the intake exceeds the critical value and a logic is incorporated in the feed back loop of the fuel modulation to start the intake. Low rate of change of pressure is unsuccessful in starting the intake. Relatively high rates result in either a quick starting of the intake or a slow unstart. Copyright © 2010 John Wiley & Sons, Ltd.     

ON THE STRUCTURE OF STEADY FLOW THROUGH DUAL-INTAKE ENGINE PORTS

The influence of intake port design on the flow field in a dual-intake valve engine was investigated using computational fluid dynamics, in order to study the effect of inlet port design on the in-cylinder flow. A detailed 3D computational grid incorporating all the features of the Ford Zetec production engine inlet ports, valves and cylinder head was initially created and the flow structure modelled at 5 and 10 mm valve lifts under steady flow conditions. Comparisons of computational results with experimental data obtained by laser Doppler anemometry indicate that the flow characteristics have been predicted well in most regions. Flow generated by different intake port designs was also simulated by introducing air into the cylinder at different directions to the inlet valve axes and the effects of port deactivation, throttling and exhaust gas recirculation were examined. The implications of the results for intake port design are discussed.     

气相色谱-质谱联用法测定日用品及食品中9种凉味剂的含量

建立了日用品及食品中薄荷脑等9种新型凉味剂含量的测定方法.样品经乙醇超声提取后,用DB-1701 MS毛细管色谱柱(30 m×0.25 mm×0.25 μm)分离,选择离子监测模式(SIM)进行质谱检测.在优化分析条件下,9种凉味剂分离良好,其在0.25～250 μg/mL浓度范围内线性关系良好,相关系数均大于0.996,除薄荷氧基.1,2丙二醇(0.26 μg/g)外,其余凉味剂的检出限均小于0.1μg/g;在3个不同加标浓度下的平均回收率为82.8％～103.5％,相对标准偏差(RSD,n=6)均不高于3.7％.该方法灵敏、准确、可靠,能较好地分离薄荷脑等9种凉味剂,具有分析时间短、抗干扰性好、定量准确等优点,可为含薄荷(清凉)口味食品的质量控制及未知凉味剂含量样品的分析提供科学数据.     

Elemental Analysis of Stone Fruits by Inductively Coupled Plasma Mass Spectrometry and Direct Mercury Analysis

This study reports the concentrations of eight trace essential (Zn, Mn, Cu, Ni, Cr, Co, V, and Se) and four toxic elements (Pb, As, Cd, and Hg) in commonly consumed stone fruits from South Korea. The samples were digested by microwave-induced combustion and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The concentrations of mercury were analyzed by direct mercury analysis (DMA). The analytical techniques were validated by linearity, limits of detection and quantification, precision, recovery, and for accuracy by analyzing a spinach leave-certified reference material; satisfactory results were obtained in all cases. The concentrations of essential trace elements varied considerably among the stone fruits. Generally stone fruits contained comparatively high concentrations of Zn (0.946 to 7.86?µg/g) and Mn (below the limit of detection to 1.66?µg/g), while lower contents of Cu (0.214 to 1.24?µg/g), Cr (0.032 to 0.114?µg/g), Ni (0.006 to 0.091?µg/g), Co (0.004 to 0.016?µg/g), V (below the limit of detection to 0.023?µg/g), and Se (0.0002 to 0.005?µg/g) were obtained. The concentrations (µg/g) of toxic metals were 0.007 (peach) to 0.016 (cherry) for Pb, 0.001 (plum) to 0.007 (cherry) for As, 0.002 (apricot and cherry) to 0.003 (peach) for Cd, and 0.0003 (peach) to 0.0016 (jujube) for Hg. The values for the estimated dietary intakes, target hazard quotients, and hazard indices were lower than the recommended safety limits by World Health Organization. Therefore, the analyzed stone fruits were deemed to be safe for human consumption.     

低碳中锰抗磨球墨铸铁的研制及其磨粒磨损性能研究

从回收和再生利用高锰钢废料中铝资源的角度出发，探讨了以高锰钢废料作为主要原材料生产低碳中铝抗磨球星铸铁的可能性及存在的技术问题，并对比考察了所研制的材料同中铝抗磨球星铸铁KMTQMn6的磨粒磨损性能和环境协调性．研究结果表明，所研制的低碳中铝球星铸铁的耐磨性能更好、环境负荷更低，是具有良好环境协调性的球星铸铁．     

Valuation of futures options with initial margin requirements and daily price limit

The paper presents a valuation model of futures options trading at exchanges with initial margin requirements and daily price limit, and this result gives an academic guidance to design trading rules at exchanges. Unlike the leading work of Black, certain trading rules are considered so as to be more fit for practical futures markets. The paper prices futures options with initial margin requirements and daily price limit by duplicating them with the help of the theory of backward stochastic differential equations （BSDEs, for short）. Furthermore, an explicit expression of the price Of the call （or the put） futures option is given and also is shown to be the unique solution of the associated nonlinear partial differential equation.     

Liquidity Risk with Coherent Risk Measures

This paper concerns questions related to the regulation of liquidity risk, and proposes a definition of an acceptable portfolio. Because the concern is with risk management, the paper considers processes under the physical (rather than the martingale) measure. Basically, a portfolio is ‘acceptable’ provided there is a trading strategy (satisfying some limitations on market liquidity) which, at some fixed date in the future, produces a cash‐only position, (possibly) having positive future cash flows, which is required to satisfy a ‘convex risk measure constraint’.