新疆红景天红色素的提取及理化性质的研究

对用索氏提取法和乙醇浸取法提取红景天红色素进行了比较，并探讨浸取的浓度，浸取温度等因素，指出了最佳生产工艺条件，从红景天中提取的天红色素是一种安全无毒的食用色素，本文还研究了几种食品添加剂对红景天红色素稳定性的影响，并对色素的耐氧化性进行了探讨，旨在为红景天红色素的开发利用提供有实用价值的信息。     

Chromium and yttrium-doped magnesium aluminum oxides prepared from layered double hydroxides

Layered double hydroxides with the hydrotalcite-like structures, containing Mg²⁺ and Al³⁺, doped with Cr³⁺ and Y³⁺, have been prepared by precipitation at constant pH. The weight percentages of Cr³⁺ and Y³⁺ were 1, 2, or 3%, and 0.5 or 1%, respectively. Single phases were obtained in all cases, whose crystallinity decreased as the content in Cr and Y was increased. The solids have been characterised by element chemical analysis, powder X-ray diffraction, thermal analyses (differential, thermogravimetric and programmed reduction), FT-IR and UV–vis spectroscopies; the specific surface areas have been determined from nitrogen adsorption isotherms at −196 °C. Upon calcination at 1200 °C for 5 h in air all solids display a mixed structure (spinel and rock salt for MgO); these solids have also been characterised by these techniques and their chromatic coordinates (CIE – L^*a^*b^*) have been determined. Their pink colour makes these solids suitable for being used as ceramic pigments.     

TiO(2) porous electrodes with hierarchical branched inner channels for charge transport in viscous electrolytes.

Titanium dioxide (TiO(2)) photoelectrodes with micro/nano hierarchical branched inner channels have been prepared by an electrohydrodynamic (EHD) technique and assembled to form dye-sensitized solar cells (DSSCs). Excellent penetration of ionic-liquid electrolytes and enhanced light harvesting in the longer wavelength region are realized within the composite-structure electrode, thus a better fill factor (ff) of 75.3 % and higher conversion efficiency (eta) of 7.1 % are obtained for viscous ionic-liquid electrolytes compared to pure nanostructured films. Hierarchical branched channels in the photoanodes can efficiently improve the transport properties of redox-active species in viscous electrolytes, which is demonstrated by electrical impedance spectroscopy (EIS). The incident monochromatic photon-to-electron conversion efficiency (IPCE) shows that enhanced light scattering in the composite film is of benefit for light harvesting and thus for solar energy conversion efficiency.     

GEOENVIRONMENTAL CHARACTERS OF YELLOW (HUANGHE) RIVER SUSPENDED LOAD

Three important characters of the suspended load of the Yellow (Huanghe) River are discussed, i.e. its temporal fluctuation as a function of solar activity, its uneven spatial distribution along the main course and the inevitability of these phenomena as a natural earth process rather than a result of disturbed ecological system caused by human activity. Implications of this understanding with regard to the control of the Yellow River are also discussed.     

Poly(4‐vinylpyridine) as the host ligand of metal‐containing chromophores for second‐order nonlinear optical active materials

Two formulas of grafted polymers with metal‐containing chromophores, potentially suitable for second‐order nonlinear optics applications, are described. Two chromophores were obtained from a tridentate ligand coordinated to Cu(II) or Pd(II) ions. The organometallic chromophore fragments were grafted to poly(4‐vinylpyridine) by the pyridinic nitrogen of the host polymer. Some qualities displayed by the new metallated polymers are remarkable: (1) a high value of the first hyperpolarizability coefficient of the chromophores, (2) a high content of the grafted chromophore in the polymers (up to 60 wt %), (3) a considerable increase in the glass‐transition temperatures (up to 240 °C), (4) good thermal stability in air (ca. 280 °C), and (5) good optical transparency of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2987–2993, 2002     

Identification of Earth Pigments by Applying Hierarchical Cluster Analysis to Solid State Voltammetry. Application to Severely Damaged Frescoes

Multivariate chemometric methods are applied for identifying earth pigments from square‐wave voltammetric measurements performed at pigment‐modified paraffin‐impregnated graphite electrodes allowing for a separation between hematite‐based earths, French ochres, Spanish ochres, siennas, umbers and green earths. This methodology is applied to the identification of the pigments in samples from the ceiling frescoes of Antonio Palomino (dated 1707) in the vaulted nave of the Sant Joan del Mercat church in Valencia (Spain). These frescoes suffered considerable damage by fire during the Spanish Civil War in 1936, resulting in severe chemical and chromatic alterations. Electrochemical data, supported by scanning electron microscopy/energy dispersive X‐ray microanalysis and Raman spectroscopy, indicate that thermal stress induced the transformation of goethite‐based yellow ochres into hematite and magnetite.     

Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

Study of Sb‐doped SnO2 Gray Ceramic Pigment with Cassiterite Structure

In this study, Sb_xSn_1?xO₂ (0 ≤ x ≤ 0.5) compositions were synthesized by the ceramic method from Sb₂O₃‐SnO₂ and Sb₂O₅‐SnO₂ mixtures and characterized by Differential thermal analysis (DTA) and thermogravimetric analysis (TG), X‐ray diffraction, UV‐V‐NIR spectroscopy and CIE L*a*b* (Commission Internationale de l'Eclairage L*a*b*) parameters measurements. Solid solutions with cassiterite structure were obtained at 1300 °C. These solid solutions are stable into glazes. From Sb₂O₃, light gray coloured materials were obtained. From Sb₂O₅, bluish gray coloured materials were obtained at 1300 °C/6h when x ≥ 0.3. Sb_xSn_1?xO₂ with 0.3 ≤ x < 0.5, T = 1300 °C and Sb₂O₅ might be established as compositional range, fired temperature and antimony precursor to obtain gray ceramic pigments in this system.     

Analysis of Early Medieval Glass Beads – The Raw Materials to Produce Green, Orange and Brown Colours

 Monochrome coloured glass beads of the Merovingians (5^th–7^th cent. AD) have been examined by different analytical methods. The elemental composition of a large number of mostly unprepared beads have been measured non-destructively by X-ray fluorescence analysis. After subtracting the content of the colouring oxides of the glass beads and normalising the residual values to 100% an identical soda-lime-glass matrix was obtained. X-ray diffraction was used for the identification of the crystalline colouring and opacifying pigments (SnO₂, Cu, Cu₂O, PbSnO₃), and scanning electron microscopy as well as electron probe microanalysis were applied to study the microstructure and the composition of white, brown, green, orange and yellow coloured glass beads. Oxidised metals, alloys (lead, copper, bronze, brass and mixtures of them) and iron smelting slag have been identified as raw materials to colour the soda-lime-glass.