Native ethylene glycol in wine: Application of a dead volume free,very fast “deans heart-cut” system on-line with multi-chromatography

Data about the existence of native HO? CH₂? CH₂? OH (MEG) in natural wines and champagne has led to delicate questions because of legal decisions already made to declare wine or champagne illegal for sale if the MEG concentrations found are above 10 mg/liter. Action has been taken because of the DEG (diethylene glycol) disaster in European wines of 1985…86. An incorrect legal decision was made due to the belief that MEG cannot be produced biochemically by grape vines. A further reason may be lack of correct data on native MEG trace concentrations, as a result of the special behavior of this diol. As first member of a homologous series whose higher members (C₄) are normally found in all wines at quite high concentration levels, MEG shows extremely adsorptive behavior. The solution of the chromatographic problems is summarized in this paper. MEG concentrations in Riesling as example are in the range of 2 to 6 mg/liter and can easily be increased by biotechnological steps to a level of around 10 to 60 mg/liter. This is again due to the specific adsorptive behavior of MEG, which can be enriched on filter surfaces and displaced when the wine acidity changes with changing types. In order to control and guarantee the qualitative and quantitative results of MEG analyses we used a combination of Deans heart cutting on-line with Multi-Chromatography. It was easy to produce false data by many otherwise useful single column or two-dimensional separation processes, etc.     

Elimination of matrix effects for headspace solid-phase microextraction of important volatile compounds in red wine using a novel coating

In this paper, hydroxy-terminated silicone oil-butyl methacrylate-divinylbenzene (OH-TSO-BMA-DVB) copolymer was first synthesized and used as stationary phase with the aid of γ-methacryloxypropyltrimethoxylsilane (KH-570) as bridge in solid-phase microextraction (SPME) using sol–gel method and cross-linking technique. It has high extraction efficiency for both polar alcohols and fatty acids and nonpolar esters in comparison with commercial PDMS, PDMS-DVB and PA fibers. A simple and sensitive headspace SPME-gas chromatography (HS-SPME-GC) method using the novel fiber was presented for the simultaneous analysis of both polar alcohols and fatty acids and nonpolar esters in wine. To check the matrix effects, various model wine matrices, including distilled water; 11.5% ethanol/water (v/v) solution; a concentrated synthetic wine; a ‘volatile-free’ wine and a real wine were investigated in detail. Matrix effects were compensated for by using internal standard method and selecting the ‘volatile-free’ wine as working standard. The method presented in this study showed satisfactory linearity, precision, detection limits and accuracy. The recoveries obtained ranged from 85.87 to 104.2%, and the relative standard deviation values were below 9%. The results obtained indicated that the present method is a validated and accurate procedure for the simultaneous determination of both polar and nonpolar aroma compounds in wine.     

Peroxidase based biosensors for the selective determination of D,L-lactic acid and L-malic acid in wines

A novel bioelectrochemical method for the direct determination of D(−) L(+) lactic acid and of L(−) malic acid in wines is presented. Multienzymatic biosensors were realized for the selective determination of the three analytes: D(−) and L(+) lactic acid were measured by a trienzymatic biosensor based on the catalytic activities of the enzymes L(+) lactate oxidase (LOD), D(−) lactate dehydrogenase (D-LDH) and horseradish peroxidase (HRP); L(−) malic acid was measured by a bienzymatic electrode, realized by coupling the enzymes L(−) malic dehydrogenase (L-MDH) and horseradish peroxidase (HRP). In both cases the enzymes were immobilized on an oxygen selective Clark electrode.The simultaneous determination of the two organic acids can be accomplished either in batch or in a flow injection analysis apparatus using the same biosensors as detectors. The analytical performance of the method, tested in standard aqueous solutions and on real samples of wines, showing high repeatability, short response times and reduced cost of analysis, suggest that the experimental approach here described could be followed to monitor the progress of malolactic fermentation.     

Classifying wine according to geographical origin via quadrupole-based ICP–mass spectrometry measurements of boron isotope ratios

The potential of quadrupole-based ICP–MS as a tool for B-isotopic analysis of wines and its usefulness in provenance determinations were assessed. A precision of 0.1–0.25% RSD (corresponding to a relative standard deviation of the mean of three replicate measurements of 0.06–0.12%) was sufficient to establish small differences in the B isotope ratios in wines from different geographical origins. Each sample measurement was bracketed by measurements of a standard and mass bias drift correction made by interpolation. Sample preparation was kept to a minimum to avoid possible fractionation. Dilution of the wine samples by a factor of 100 with 0.65% HNO₃ was found to reduce matrix-induced mass discrimination substantially. Wines from three wine-producing regions, Stellenbosch, Robertson, and Swartland, in the Western Cape Province of South Africa, and wines from specific regions in France (Bergerac) and Italy (Valpolicella) were analyzed by ICP–QMS for their B-isotopic compositions. It was concluded that the ¹¹B/¹⁰B ratios can be used to characterize wines from different geographical origins. Average ¹¹B/¹⁰B ratios in red wines from South Africa (Stellenbosch), France (Bergerac), and Italy (Valpolicella) were found to differ by between 0.5 and 1.5%.     

Effects of enzyme treatment and skin extraction on varietal volatiles in Spanish wines made from Chardonnay, Muscat, Airén, and Macabeo grapes

Varietal compounds have been analyzed in wines prepared in the laboratory from four grape varieties grown in Spain. The possibilities for enhancing their aroma afforded by addition of glycosidase enzymes and steeping with the skin were studied. Both treatments increased substances responsible for varietal aroma in all wines, the effect being particularly significant for benzyl alcohol.     

Development of solid-phase extraction and solid-phase microextraction methods for the determination of chlorophenols in cork macerate and wine samples

Tri-, tetra- and pentachlorophenol (TCP, TeCP and PCP) can be considered the precursors in the formation of corresponding chloroanisoles, known to be powerful odorants in corks and wine. Determining the presence of these chlorophenolic compounds in cork soaking solutions (ethanol/water mixtures, 12% (v/v) ethanol used for cork quality control testing), or in wine can be achieved by acetylation/gas chromatography electron-capture detection. In order to reach the required sensitivity, a previous preconcentration step is necessary. Solid-phase extraction (SPE) and headspace solid-phase microextraction (HS-SPME) have given good results for the preconcentration of TCP, TeCP and PCP in such matrices. The use of Oasis HLB cartridges gives acceptable recoveries for the three compounds when different volumes (50-250 mL) of cork macerate with concentrations ranging from 20 to 150 ng/L are processed. Preconcentration based on HS-SPME has also been optimised with a 100 microm polydimethylsiloxane fibre and in situ derivatization. The HS-SPME method allows chlorophenols in a cork soaking solution and in wine to be determined with a limit of detection of 1 ng/L for each compound (in cork macerate) and a repeatability of around 0.5%-5% (n=8) for a concentration level of 30 ng/L.     

Volatile sulphur compounds in wines related to yeast metabolism and nitrogen composition of grape musts

The influence of nitrogen compounds in grape musts on the content of sulphur compounds of wines was studied. Different vinifications were performed with the addition of methionine (20 mg l⁻¹) and/or cysteine (40 mg l⁻¹) to grape musts before alcoholic fermentation. Six grape musts, with different nitrogen composition, from cultivars of the ‘Vinhos Verdes’ Region, in Portugal, were used. Addition of methionine to grape musts enhanced the content of wines in 3-(methylthio)-1-propanol, acetic acid-3-(methylthio)propyl ester, 3-(methylthio)propionic acid and some unidentified sulphur compounds. Increase of cysteine concentration in musts led to the production of wines with high levels of hydrogen sulphide and cis-2-methyltetrahydro-thiophene-3-OL and also unidentified sulphur compounds; however, the content of 3-(methylthio)propionic acid in the wines decreased considerately with the addition of cysteine to grape musts. This work showed that cultivars from the Vinho Verde Region show different sulphur compound contents. Avesso wines, elaborated from grape musts with low amino acids level, presented the highest total sulphur compounds content. Wines from Azal branco and Alvarinho were characterised by high contents of 4-(methylthio)-1-butanol and 3-(methylthio)propionic acid, respectively. A high content of N-(3-(methylthio) propyl)-acetamide and dimethylsulphone characterise the Loureiro wines. In contrast, Trajadura wines, produced from a must rich in amino acids, presented a low total sulphur compounds content; however, these wines were also characterised by high concentrations of 4-(methylthio)-1-butanol, acetic acid-3-(methylthio)propyl ester and hydrogen sulphide.     

Reagentless system for sulphite determination based on polyaniline

A new reagentless system for sulphite (or sulphur dioxide) determination is reported based on the use of an organic conducting polymer, polyaniline, and its absorbance variation at 550 nm, depending on the sulphite concentration. After chemical polymerisation of aniline a very thin film of polyaniline is obtained. Although the response is not fully reversible, each film can be used for at least 10 measurements for low analyte concentrations (up to 0.5 mg l⁻¹) and five measurements for higher sulphite concentrations. Moreover, the reproducibility, ease of preparation and low cost of the films, permit the use of a new disposable system for each measurement. When the change in absorbance at 550 nm was measured for 210 s (stabilisation time), the system showed a linear response, which ranged from 0.025 to 1.50 mg l⁻¹ of sulphite. A theory with regard to the reaction mechanism between the polyaniline films and sulphite is also proposed. The system was applied to sulphite determination in wine samples and the results were in agreement with those obtained by the Official Method of Analysis (iodometric titration).