Determining the wax content of crude oils by using differential scanning calorimetry

By the use of differential scanning calorimetry (DSC), a new method to measure the wax content of crude oil has been developed. In this paper, the wax content of a crude oil is proposed and proved to be the Q (total thermal effect of wax precipitation in sample) ratio of the crude oil and its corresponding wax obtained by using standard acetone method, i.e. Q_oil/Q_wax. For the 14 studied crude oils with the wax content ranging from 1 to 27 wt.%, the wax contents determined by the presented method are in good agreement with those determined by standard acetone method, with an absolute average deviation of only 0.82 wt.%. This method has an advantage over reported DSC methods in which the exact dissolution or precipitation enthalpy of wax is a must. It is also found that the wax contents determined by either of the two methods show good linear relationship with the total thermal effect Q_oil, with the correlation coefficients over 0.96. According to the empirical correlations, the wax content of a crude oil can be easily determined by using the DSC total thermal effect Q_oil. In addition and more significantly, the new method can be applied to improve the accuracy in determining the amount of precipitated wax in a waxy crude oil at different temperatures.     

Identification,quantification and Chrastil modelling of wheat straw wax extraction using supercritical carbon dioxide

Supercritical carbon dioxide (scCO₂) can be used as a “green” selective solvent for extractions of wheat straw waxes. For the first time, the crude extraction yields of wheat straw waxes and the yields of a single high value group of components (wax esters) using various scCO₂ conditions (305.15 to 373.15 K and 7.5 to 40 MPa) have been modelled using the Chrastil equation (Chrastil, 1982). The model accurately predicts both the crude yield and percentage of valuable wax esters within the extracts enabling maximum extraction efficiency. The key compounds within the waxes (fatty acids, sterols, fatty alcohols, wax esters, β-diketones and alkanes) have been identified and quantified. This study highlighted that, 14,16 hentriacontanedione was extracted at critical temperature and pressure in concentrations of 1000 μg.g⁻¹ straw. This molecule could demonstrate significant potential as a natural chelate for metal recovery and also in the formation of super-hydrophobic coatings.     

红外光谱技术对广东博罗横岭山商周时期墓地出土古玉器上蜡工艺的揭示及其意义

广东博罗横岭山商周时期墓地是广东省目前所发现的最重要的商周时期墓葬群,该墓地出土的玉器样品通过一系列的科学鉴定研究后发现,玉器的红外光谱在2 960 cm-1(相对较弱)、2 920和2 853 cm-1附近出现了2～3个明显的特征性吸收峰,结合对纯蜡样品、现代上蜡玉器样品的测试比较,认为博罗横岭山墓地出土玉器在加工过程中曾经经过上蜡处理,首次揭示出商周时期岭南先民掌握了在加工中利用蜡来增加玉器美观技术的事实。     

Wax treatment of wood slows photodegradation

Waxes and wax emulsions are one of the most important solutions for non-biocidal wood protection. Wax treated wood is designed for outdoor use, therefore it is of considerable importance to elucidate the influence of weathering on the photodegradation processes. It is presumed, that wax treatment will reduce water uptake and thus reduce or slow down photodegradation processes. In order to test this hypothesis, three types of wax emulsions at two different concentrations were vacuum impregnated into Norway spruce wood specimens: an emulsion of montan wax (LGE), an emulsion of polyethylene (WE1) and an emulsion of oxidized polyethylene (WE6) wax. The samples were exposed to artificial accelerated weathering (AAW) for 500 cycles. Before and after AAW colour, the contact angle of water and moisture content were determined. Chemical and morphological changes at exposed surfaces were also investigated with FTIR spectroscopy and SEM. In parallel, the uptake of wax emulsions and water into the axial surfaces of samples was determined with a tensiometer. The moisture content measurements showed that the best hydrophobic effect was achieved with LGE treated wood, where the lowest colour and FTIR changes were observed as well. These results were supported by tensiometer measurements as well. Presented data clearly showed that high loadings of waxes reduce or at least slow down weathering. Among tested waxes, montan wax was found the most effective.     

Cutinsomes and cuticle enzymes GPAT6 and DGAT2 seem to travel together from a lipotubuloid metabolon (LM) to extracellular matrix of O. umbellatum ovary epidermis

In the ovary epidermis of O. umbellatum there are lipotubuloid metabolons (LMs), in which synthesis of lipids takes place. This process partly provides nourishment, and partly cuticle building blocks, transformed, among others, with the participation of cutinsomes. The cutinsomes are cutin-building structures, 40–200 nm in size, which are formed as a result of self-assembly and self-esterification of hydroxy fatty acids. The cutinsomes, by binding to the cuticle, introduce into it nonlinear, amorphous and cross-linked polymers. Double-immunogold EM observations revealed that enzymes producing elements of cutin (GPAT6) and waxes (WS/DGAT) were found not only as free cytoplasmic molecules but also in many cases they were bound to carboxylate-carboxylic shell of cuntinsomes. Hence, we suppose that these enzymes can move alone or together with the cutinsomes through cytoplasm (pH 6.8–7.0), plasmalemma and the polysaccharide layer of a cell wall to the site of their functioning i.e. to the cuticle (pH 5.0).     

Single eye analysis and contralateral eye comparison of tear proteins in normal and dry eye model rabbits by MALDI-ToF mass spectrometry using wax-coated target plates

A study of rabbit tear protein expression in a dry eye rabbit model was performed to determine if a pattern in expressed proteins could be identified. The uniqueness of the model allows the comparison of normal (control) eye tear protein expression with surgically induced dry eye tear protein expression in individual animals. The sensitivity of the method allows for single eye analysis. One-dimensional mini-gel electrophoresis of the tear proteins did not show substantial differences between band patterns of the normal versus the dry eye, but was used to assess the molecular weight ranges of the major proteins. Specific assignments of some of the predominant proteins were obtained by tandem mass spectrometry (MS) which showed that the lower molecular weight lipid-binding proteins (approximately 10 kDa to 36 kDa) constitute a considerable amount of the observed protein, followed in lesser quantities by the transferrins which have higher molecular weights ranging from 70 kDa to 85 kDa. Enhancement of matrix-assisted laser desorption/ionization time-of-flight (MALDI-ToF) MS linear mode analysis of intact proteins in tear fluid was demonstrated through the use of wax-coated MALDI plates and spot washing. MALDI-ToF MS analysis of the expressed tear proteins illustrates that differences between normal eye tear and dry eye tear protein content are manifested in changes in the lower molecular weight lipid-binding proteins such as lipophilin which exhibits an increase in concentration in the dry eye, and β-2 microglobulin which undergoes a decrease.     

Why a mosquito leg possesses superior load-bearing capacity on water: Experimentals

Mosquitoes possess the striking ability to walk on water because each of their legs has a huge water supporting force(WSF) that is 23 times their body weight.Aiming at a full understanding of the origins of this extremely large force,in this study,we concentrate on two aspects of it:the intrinsic properties of the leg surface and the active control of the initial stepping angle of the whole leg.Using a measurement system that we developed ourselves,the WSFs for the original leg samples are compared with those whose surface wax and microstructures have been removed and with those of a different stiffness.The results show that leg f exibility plays a dominant role over surface wax and microstructures on the leg surface in creating the supporting force.Moreover,we discuss the dependence relationship between the maximum WSF and the initial stepping angle,which indicates that the mosquito can regulate this angle to increase or decrease the WSF during landing or takeoff.These finding are helpful for uncovering the locomotion mechanism of aquatic insects and for providing inspiration for the design of microfluids miniature boats,biomimetic robots,and microsensors.     

蜡油和洗油的HPLC法测定

采用HPLC法测定蜡油和洗油的含量,通过以蜡油和洗油混合液质量比所得拟合曲线计算混合液中蜡油与洗油的质量比值,为生产中快速准确测定蜡油和洗油的混合溶剂比提供一种可行的方法。     

Calculating Deposit Formation in the Pipelining of Waxy Crude Oils

Wax deposition from a waxy crude oil is modelled in turbulent flow in a pipeline. Molecular diffusion in a thin boundary layer near the pipe wall is taken as the only mechanism responsible for deposition. The model takes into account the ablation, which is a flow-related phenomenon that limits the growth of the deposit. The effect of desaturation of the oil is analyzed as well. Two field cases are presented in which the numerical implementation of the model is in agreement with the experimental data. Work performed in the framework of the cooperation between EniTecnologie (Milan) and I2T3 (Florence).