Röntgenographische Strukturuntersuchung geschmolzener Magnesium-Blei Legierungen

Abstract

Um Aufschluß über die Atomanordnung in geschmolzenen Magnesium-Blei Legierungen zu erhalten, wurden rontgenographische Strukturuntersuchungen durchgeführt.     

Comparative study of the empirical interatomic potentials and density-functional simulations of divacancy and hexavacancy in silicon

The comparison between three classical potentials and density functional theory (DFT) is performed mainly for divacancy and hexavacancy in Si crystal. According to their performances on the formation energies and structural properties (distortion magnitude, relaxation volume and symmetry), the limitations and validities of classical potentials are discussed. It is found that the outward relaxation directions of EDIP and Tersoff (T3) are contrary to the DFT and Stillinger-Weber (SW) directions (inward), which restrict their application in the structural property calculations. Except for the divacancy symmetries, the results of SW are in agreement with the DFT results. Thus, it can be concluded that SW should be the best potential to describe V₂ and V₆.     

Equilibrium concentration of point defects in crystalline4He at O K

We calculate the concentrations of vacancies and intersitials in the ground state of a Bose solid which models⁴He. Because ground-state boson wave functions are nodeless, their probability densities correspond to classical Boltzmann factors, and properties of Bose solids, such as the concentration of vacancies and interstitials, can be calculated using classical statistical mechanics. We model the ground-state wave function of⁴He with the product (Jastrow) form that corresponds to a classical 1/r ^b pair potential, and use a quasiharmonic approximation to calculate the concentrations of vacancies and interstitials in an fcc lattice with this potential. We find that the fractional concentration of vacancies at the melting point is 1.60×10^–5 for 1/r ⁹ and 6.36×10^–6 for 1/r ⁶, while the interstitial fractional concentrations are 1.32×10^–3 and 1.08×10^–5, respectively; the defect concentrations decrease by 7–16 orders of magnitude when the crystal density increases by 50%. At the same density, and with the same 1/r ⁹ potential, the concentration of vacancies in an hcp lattice is essentially the same as in an fcc lattice, but the interstitial concentration is much lower, apparently because the fcc lattice contains a more favorable split-interstitial site than does hcp. Therefore, our fcc vacancy results should be directly relevant for (hcp)⁴He, providing what we think is a lower bound on the vacancy concentration, while the interstitial concentration in⁴He is probably much lower than our results.     

Characterization of quenched-in vacancies in Fe–Al alloys

Physical and mechanical properties of Fe–Al alloys are strongly influenced by atomic ordering and point defects. In the present work positron lifetime (LT) measurements combined with slow positron implantation spectroscopy (SPIS) were employed for an investigation of quenched-in vacancies in Fe–Al alloys with the Al content ranging from 18 to 49 at.%. The interpretation of positron annihilation data was performed using ab-initio   theoretical calculations of positron parameters. Quenched-in defects were identified as Fe-vacancies. It was found that the lifetime of positrons trapped at quenched-in defects increases with increasing Al content due to an increasing number of Al atoms surrounding the Fe vacancies. The concentration of quenched-in vacancies strongly increases with increasing Al content from ≈10⁻⁵$\approx {10}^{-5}$ in Fe₈₂Al₁₈${\mathrm{Fe}}_{82}{\mathrm{Al}}_{18}$ (i.e. the alloy with the lowest Al content studied) up to ≈10⁻¹$\approx {10}^{-1}$ in Fe₅₁Al₄₉${\mathrm{Fe}}_{51}{\mathrm{Al}}_{49}$ (i.e. the alloy with the highest Al content studied in this work).     

Atomic fraction around defects associated with nanoparticles in AlCuMg alloys

A positron annihilation spectroscopy analysis method to obtain a quantitative determination of the chemical composition around defects inside nanoparticles is presented here. This methodology is applied to AlCuMg alloys to study the rapid hardening phenomena associated with solute-vacancy aggregation. Coincidence Doppler Broadening (CDB) and lifetime spectroscopy measurements of reference samples of pure elements with and without defects were analyzed to give quantitative information of the average chemical environment around vacancies, i.e. the atomic fraction of the first neighbors of these defects, in the alloys studied. The accuracy and reproducibility of the methodology is confirmed not only by good fits to the experimental data but, in most cases, by the consistency between the mean lifetime values predicted, using the CDB estimation, and the mean lifetime values independently measured. Discrepancies in the methodology are expected when there is poor CDB contrast between elements, i.e. having similar electronic structure (for example, Al and Mg). The criterion for establishing the statistical accuracy of the separation of elements in these special cases is discussed. The methodology can be applied not only to study homogeneous materials as metallic alloys, but also to study the depth profile in thin films.     

Peculiarities in the Raman spectra of ZrB12 and LuB12 single crystals

We have measured Raman spectra of high-quality Zr^natB₁₂, Lu^natB₁₂ and Lu¹¹B₁₂ single crystals with high resolution, and the observed strong peaks are attributed to specific vibration modes. Besides, there are a number of additional Raman peaks in spectral ranges, where only Raman-inactive vibrations of the atomic arrangement are expected. Accordingly, it is assumed, that the investigated crystals contain intrinsic structural imperfections or distortions in sufficient concentration and efficiency to initiate the observed breaking of phonon selection rules. We suppose boron vacancies, boron isotope effects and displacements of the metal atoms to be reasons for such imperfections.     

The Effect of Water on the 2-Propanol Oxidation Activity of Co-Substituted LaFe1−xCoxO3 Perovskites

Perovskites are interesting oxidation catalysts due to their chemical flexibility enabling the tuning of several properties. In this work, we synthesized LaFe_1−xCo_xO₃ catalysts by co-precipitation and thermal decomposition, characterized them thoroughly and studied their 2-propanol oxidation activity under dry and wet conditions to bridge the knowledge gap between gas and liquid phase reactions. Transient tests showed a highly active, unstable low-temperature (LT) reaction channel in conversion profiles and a stable, less-active high-temperature (HT) channel. Cobalt incorporation had a positive effect on the activity. The effect of water was negative on the LT channel, whereas the HT channel activity was boosted for x>0.15. The boost may originate from a slower deactivation rate of the Co³⁺ sites under wet conditions and a higher amount of hydroxide species on the surface comparing wet to dry feeds. Water addition resulted in a slower deactivation for Co-rich catalysts and higher activity in the HT channel state.     

Influence of cracks generation on the structural and optical properties of GaN/Al0.55Ga0.45N multiple quantum wells

Both cracked and crack-free GaN/Al_0.55Ga_0.45N multiple quantum wells (MQWs) grown on GaN template by metalorganic chemical vapor deposition have been studied by triple-axis X-ray diffraction, grazing-incidence X-ray reflectivity, atomic force microscope, photoluminescence spectroscopy and low-energy positron annihilation spectroscopy. The experimental results show that cracks generation not only deteriorates the surface morphology, but also leads to a period dispersion and roughens the interfaces of MQWs. The mean density of dislocations in MQWs, determined from the average full-width at half-maximum of ω-scan of each satellite peak, has been significantly enhanced by the cracks generation. Furthermore, the measurement of annihilation-line Doppler broadening reveals a higher concentration of negatively charged vacancies in the cracked MQWs. The combination of these vacancies and the high density of edge dislocations are assumed to contribute to the highly enhanced yellow luminescence in the cracked sample.     

The thermodynamics of hydrogen-vacancy interactions in aluminum

The thermodynamic properties of Al-H solid solutions containing lattice vacancies have been discussed using an approach in which the grand canonical ensemble is used to elucidate the behavior of the Al-VAC-H system in Fermi-Dirac statistics. Calculations have been presented and compared for specific models in which H-atoms act both as a simple interstitial species and forms either decorated vacancies or substitutional defects.Vacancy concentrations concomitant to different levels of hydrogenization are calculated and approximate penetration curves for the ingress of vacancies from the metal surface are presented.