可调谐液晶法-珀滤光片的研究

提出了一种可用于密集波分复用系统中的新型可调谐滤光片的设计方法,该设计利用了液晶的双折射现象,以及液晶盒内法-珀效应,从理论上分析了器件的光谱特性,计算了液晶分子的折射率调制和其分子转动角度的关系.并对器件进行了性能测试.实验结果与理论吻合较好.     

Tunable microlens arrays using polymer network liquid crystal

A tunable-focus microlens array based on polymer network liquid crystal (PNLC) is demonstrated. The PNLC was prepared using an ultraviolet (UV) light exposure through a patterned photomask. The photocurable monomer in each of the UV exposed spot forms an inhomogeneous centro-symmetrical polymer network which acts as a lens when a homogeneous electric field is applied to the cell. The focal length of the microlens arrays is tunable with the applied voltage.     

Widely tunable long-period fiber grating with nm-thick higher refractive index film overlay

By introducing a four-layer step-index waveguide modeling, the characteristics of long-period fiber grating (LPFG) with an nm-thick film overlay, which has higher refractive index than that of fiber cladding are investigated in detail. The influence of both the overlay thickness and refractive index on the tuning ability of LPFG is analyzed. The numerical results demonstrate that spectral response of LPFG is divided into three distinct regions as the overlay deposition increases and the shift of resonant wavelength is drastic in some special thickness range. In conjunction with higher-order cladding mode coupling and fiber cladding etching, the sensitivity of LPFG to the overlay refractive index is enhanced significantly and over 120 nm resonant wavelength tunable range is achieved.     

Fiber Optical Bragg Grating Refractometer

We have demonstrated an evanescent field refractive indexfiber sensor comprising a 42-mm Bragg grating in an etched fiber together with a tunable Distributed Bragg Reflector (DBR) laser. Characterization of different aqueous sucrose solutions resulted in a resolution of roughly 10 mM sucrose. The sensor in the presented form has a theoretical sensitivity of higher than 10 5 refractive index unit (riu) in a refractive index region close to the cladding index of the fiber. However, the technique allows for an even higher sensitivity than 10 6 riu with a proper signal processing scheme.     

Laser-induced fluorescence microscopic system using an optical parametric oscillator for tunable detection in microchip analysis

A laser-induced fluorescence microscopic system based on optical parametric oscillation has been constructed as a tunable detector for microchip analysis. The detection limit of sulforhodamine B (Ex. 520 nm, Em. 570 nm) was 0.2 mol, which was approximately eight orders of magnitude better than with a conventional fluorophotometer. The system was applied to the determination of fluorescence-labeled DNA (Ex. 494 nm, Em. 519 nm) in a microchannel and the detection limit reached a single molecule. These results showed the feasibility of this system as a highly sensitive and tunable fluorescence detector for microchip analysis.     

Cesium lead halide perovskite nanocrystals for ultraviolet and blue light blocking

Using cesium lead halide perovskite nanocrystals, CsPb(Cl/Br)_3, as a light absorber, we report a highly effective UV and blue light blocking film. The CsPb(Cl/Br)_3 nanocrystals are well dispersed in the ethyl cellulose(EC) matrix to compose a UV and blue light shielding film, and the absorption edge of the film is tunable by adjusting Cl to Br ratio using anion exchange. The CsPbCl_2 Br-EC film exhibits a transmittance of 5% at 459 nm, 90% at 478 nm and 95% in the range of 500–800 nm, which makes it excellent for UV and blue light shielding. In addition, the as-prepared EC-CsPb(Cl/Br)_3 film shows excellent photostability under UV irradiation. Results demonstrate that this EC-CsPb(Cl/Br)_3 based materials with sharp absorbance edges, tunable blocking wavelength, and high photostability can be useful for the applications in UV and blue light blocking and optical filters     

Development of a stabilized low temperature infrared absorption cell for use in low temperature and collisional cooling experiments

We have constructed a stabilized low temperature infrared absorption cell cooled by an open cycle refrigerator, which can run with liquid nitrogen from 250 to 80K or with liquid helium from 80K to a few kelvin. Several CO infrared spectra were recorded at low temperature using a tunable diode laser spectrometer. These spectra were analyzed taking into account the detailed effects of collisions on the line profile when the pressure increases. We also recorded spectra at very low pressure to accurately model the diode laser emission. Spectra of the R(2) line in the fundamental band of 13CO cooled by collisions with helium buffer gas at 10.5K and at pressures near 1 Torr have been recorded. The He-pressure broadening parameter (gamma(0) = 0.3 cm(-1) atm(-1)) has been derived from the simultaneous analysis of four spectra at different pressures.     

Influence of Cu2+ dopant in optical property of CdTe quantum dots and photoelectrochemical performance of CdTe:Cu2+/TiO2 nanotube arrays

A novel one-step synthesis process was used to prepare CdTe:Cu²⁺/TiO₂ nanotube arrays (TNTAs). X-ray powder diffraction and high-resolution transmission electron microscopy analyses confirmed that the obtained CdTe:Cu²⁺ quantum dots (QDs) possess cubic structures, which are approximately spherical, and a small particle size (2.95 nm). The photoluminescent and UV–visible absorption spectra of CdTe:Cu²⁺ QDs also display an obvious redshift, which was attributed to the replacement of Cd²⁺ with Cu²⁺. Compared with that of the TNTAs and CdTe/TNTAs, the photoelectric conversion efficiency of CdTe:5% Cu²⁺/TNTAs increased by 785.7% and 103.3%, respectively. The incident photo-to-current conversion efficiency of CdTe:5% Cu²⁺/TNTAs was 50.6%, which indicated the potential use of QDs in photochemical solar cells.     

Tuneable Sagnac comb filter including two wave retarders

In this paper we study theoretically and experimentally a wavelength-tuneable Sagnac birefringence filter. The device is a Sagnac interferometer including a symmetric fibre coupler and a length of high-birefringence fibre in the loop. A wave retarder is inserted at each end of the birefringent fibre for absolute wavelength tuning. We show theoretically that wavelength tuning through wave plate orientation ensuring constant amplitude of the filtering function is possible only if a minimum of two wave retarders are included in the setup. The position of the transmission peaks then varies linearly with the angle of one of the retarders and can be adjusted over one entire channel spacing. This happens only when a quarter-wave retarder and a half-wave retarder are used, if the former is oriented at 45° with respect to the fibre birefringence axes, while the orientation of the latter serves as the adjustment parameter. The theoretical predictions are confirmed by the experimental results.     

An integrated plastic microchip for enhancing electrophoretic separation using tunable pressure-driven backflows

Microfluidic CE (MCE) is an effective solution for rapid and sensitive determination of multiple analytes. Herein, a dynamic coated cyclic olefin copolymer microchip was developed having an on-chip micropump for fluid velocity adjusting in electrophoretic separations. This micropump was fabricated by constructing a polyacrylamide gel membrane at one channel terminal. Once applying electric field across the membrane, a pressure-driven flow generated automatically to balance the electroosmotic flow (EOF) mismatch at the channel-membrane interface. The influence of gel precursor concentration and operating voltages on the fluid velocity was carefully evaluated. Moreover, the highly integration of injection, separation, and pumping units of the MCE system minimized the dead volume and provides satisfied column efficiency. Experiments showed that by adjusting of pumping voltage reduced the fluid velocity by a factor of 6, resulting six- and threefold resolving power enhancements of rhodamine dye mixture and amino acid mixture, respectively. Furthermore, the developed MCE method was applied for rhodamines and amino acids quantitation in food and cosmetics, with standard addition recoveries of 87.3–106.9% and 89.9–117.4%, respectively. These results were also confirmed by standard HPLC method, revealing the application potential in fast and onsite analysis of complex samples.