Biosorption of Chromium(III) by Biomass of Seaweed Sargassum sp. in a Fixed-Bed Column

This work aimed at modeling chromium biosorption using the biomass of seaweed Sargassum sp. in a fixed-bed column. The mathematical model used was obtained from the mass balance of the component in the liquid phase and in the biosorbent material. The effects of both axial dispersion in the column and the resistance to mass transfer in the solid were considered for the solution of the partial differential equations of the model, using the Galerkin method on finite elements. To represent the equilibrium data of the batch system the Langmuir isotherm were used. The chromium ion adsorption capacity of the seaweed Sargassum sp., at a temperature of 30°C and pH 3.5, was 2.61 mmol/g. The model performance was evaluated from experimental data obtained at 30°C for flow rates of 2, 6 and 8 mL/min. The parameters of the model, mass transfer and axial dispersion coefficients, were adjusted from these experimental data. The model proved adequate to describe chromium biosorption dynamics in fixed-bed columns.     

Ethylene polymerization by chromium complexes with phosphorous‐bridged bisphenoxy ligand

Chromium catalysts combined with phosphorous‐bridged bisphenoxy ligands were found to be highly active for ethylene polymerization. The most efficient catalyst precursor among them, generated by combining bis[3‐tert‐butyl‐5‐methyl‐2‐hydroxyphenyl](phenyl)phosphine hydrochloride ( 1a ) and CrCl₃(THF)₃, was characterized. X‐ray analysis of (3‐tert‐butyl‐5‐methyl‐2‐phenoxy)(3‐tert‐butyl‐5‐methyl‐ 2‐hydroxyphenyl)(phenyl)phosphine bis(tetrahydrofuran)chromium dichloride ( 6 ), obtained by the reaction of 1a and CrCl₃(THF)₃ in the presence of NaH, revealed a unique structure in which one phenol moiety of the bisphenol did not coordinate to the chromium center. Complex 6 showed higher activities than those observed in the in situ catalyst system. Polyethylene of various molecular weights was obtained with differing activators. The highest activity (113.5 kg mmol (cat)^?1 h^?1) was observed when TIBA/TB was used as a cocatalyst. A medium molecular weight polymer with narrow molecular weight distribution (M_w = 128,700, M_w/M_n = 1.8) was obtained using a 6 ‐TIBA/B(C₆F₅)₃ system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3668–3676, 2007     

铬（Ⅲ）邻菲咯啉,8—羟基喹啉配合物／Y型分子筛的制备及苯酚催化羟化

制备了铬（Ⅲ）邻菲咯啉，８－羟基喹啉配合物／Ｙ型分子筛，利用元素分析，ＳＥＭ，ＵＶ－ＶｉｓＢＥＴ及ＸＲＤ等方法确定了分子筛选笼中金属配合物的生在及其晶体结构，考察了实验参数对苯酚转化率及产物选择性的影响。     

Ein Beitrag über Oxide vom Typ AMO4 (A = Ti3+, Cr3+; M = Nb5+, Ta5+)

A Contribution on Ternary Oxides of the AMO₄-Type (A = Ti³⁺, Cr³⁺; M = Nb⁵⁺, Ta⁵⁺ ) CrNbO₄, CrTaO₄, TiNbO₄, and TiTaO₄ were prepared by CO₂-laser technique. X-ray single crystal investigations show a random distribution of the metal ions in Rutil type structure, space group D–P4₂/mnm. Calculations of the free energy of reaction between Ti₂O₃ and Nb₂O₅ show higher stability of TiO₂ beside NbO₂. In TiNbO₄ both metals exhibit the oxidation state +4.     

增敏双波长光度法同时测定底泥中的铜和铬

在pH6．4的磷酸二氢钾-磷酸氢二钾缓冲液和CIMAJB、正丁醇、正庚烷组成的微乳液的介质中，水杨基荧光酮与铜（Ⅱ）、铬（Ⅵ）的显色体系灵敏度都有很大提高，选择了合适的测定波长，利用双波长解方程组法同时测定了底泥中的铜和铬。结果令人满意。     

光同时诱导水中Cr(Ⅵ)的还原与橙黄Ⅱ的氧化

光同时诱导水中Cr(Ⅵ)的还原与橙黄Ⅱ的氧化;染料;橙黄Ⅱ;Cr(Ⅵ);光还原;光降解     

A study of peralkylated derivatives of bis(η6-benzene)chromium by gas-phase electronic absorption spectroscopy

The gas-phase electronic absorption spectra of (⁶-C₆R₆)₂Cr (R = Me (1) and Et (2)) reveal Rydberg structures, which disappear on going to the condensed phase. Each spectrum shows a Rydberg series converging to the ionization threshold. The first ionization potential determined as the series convergence limit is 4.662±0.008 eV for 1 and 4.667±0.019 eV for 2. The Rydberg bands are due to the transitions from the non-bonding MO 3d_z2 to the R4s and Rnp (n = 4—10) levels. The influence of methyl and ethyl substituents on the term values of the Rydberg transitions depends on the principal quantum number of the Rydberg MO.     

Solid-state mechanochemical synthesis of tris(4-imino-2-pentanonato)chromium,Cr[CH3C(NH)CHC(O)CH3]3

Tris(4-imino-2-pentanonato)chromium was prepared by solid-state synthesis under conditions of mechanical activation of a mixture of chromium(III) chloride and sodium 4-imino-2-pentanonate and characterized by IR spectroscopy, X-ray diffraction, and electronic absorption spectroscopy.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2227–2229, December, 1994.The present work was carried out as a part of Project No. 1.164 Mechanochemical Synthesis of Complex Compounds of The State Scientific and Technical Program Ecologically Safe Processes in Chemistry and Chemical Technology with the financial support of the Ministry of Science of the RF.     

Ion-exchange selectivity and chromatographic separation of trivalent metals on titanium antimonate

Summary The ion exchange selectivity of trivalent metal ions has been determined on titanium antimonate cation exchanger prepared by coprecipitation of antimony to titanium at different mole ratios. The selectivity sequence Al³⁺<Cr³⁺<Ga³⁺<In³⁺<Fe³⁺ was found for trivalent metal ions at an initial concentration of 10^–4 mol dm^–3 in nitric acid media. A high separation factor ^Ga/Al = Kd^Ga/Kd^Al, 4.8×10³, was observed for the Ga³⁺–Al³⁺ pair on titanium antimonate with an antimony to titanium ratio of 0.34. The effective separation of Ga³⁺ and In³⁺ from Al³⁺ was achieved using a 3 cm×0.5 cm i.d. column containing titanium antimonate with an antimony to titanium ratio of 0.34.     

Method Development for the Speciation of Chromium in River and Industrial Wastewater Using GFAAS

A simple, sensitive and inexpensive method for the speciation of Cr(VI) and Cr(III) in river and industrial wastewater was developed, optimized and validated. Samples were collected, filtered and then chromium species were determined in the filtrate. In the filtrate, total Cr was determined directly by Graphite Furnace Atomic Absorption Spectrometry (GFAAS). A portion of the filtered sample was buffered to pH 6.4, extracted with Amberlite LA-2/MIBK and finally Cr(VI) was determined in the organic extract and Cr(III) in the aqueous phase using GFAAS. The method was evaluated by analysis of the certified reference material, CRM 544, and good accuracy was obtained. The limit of detection for Cr(VI) and Cr(tot)/Cr(III) was found to be 0.30 and 0.08 µg L⁻¹, respectively, and a precision expressed as relative standard deviation of better than 11% was achieved for nine replicates. A number of water samples from the Tinishu Akaki River, Ethiopia, and wastewater samples from a chemical plant in Germany, were analysed. In addition to the GFAAS method, Cr(tot) was also determined using ICP-MS (in CRM 544, lyophilized water, and Tinishu Akaki River water samples) and Cr(tot) and Cr(VI) using UV-VIS spectrophotometry (in CRM 544 and industrial wastewater samples). Good agreement between the different methods was found.