光学分析方法在DNA检测中的应用

介绍了用于DNA检测的各种光学分析方法及其原理,主要包括荧光法、化学发光法、光纤传感法、比色法、表面等离子共振法以及其他光学衍生方法。     

Arsenite oxidation and arsenate determination by the molybdene blue method

Based on the similarity in properties of arsenate and phosphate, the colorimetric method using the molybdene blue complex was tested in order to determine low As(V) concentration in waters. The influence of complex formation time, daylight, temperature and competitive anions (silicate and sulphate) upon complex formation was determined. Optimal complex formation was reached in 1 h at 20±1 °C and was slightly favoured when developed in daylight. The formation rate declined with decreasing reaction temperature and no influence of any of the competitive anions tested (at concentrations usually found in natural waters of granitic areas) was noted. The detection limit of this method was 20 μg As(V) l⁻¹. This simple, fast and sensitive arsenic determination method is suitable for field analysis, especially for waters containing low levels of phosphate and organic matter. Through arsenate determination, this colorimetric method allowed the arsenite oxidation efficiency of five common industrial oxidants to be compared. H₂O₂ and MnO_2(s) were not considered as effective oxidants as a high excess was necessary to ensure As(III) oxidation. NaOCl and KMnO₄ were promising oxidants as they allowed complete arsenite oxidation with a small excess for NaOCl or even less than the electron stoichiometric ratio in the case of KMnO₄. FeCl₃ was the most effective oxidant among the reagents tested here.     

Studies on the solvatochromism of Fe(CN)2(phen)2

Summary The influence of organic solvents on the electronic spectra of Fe(CN)₂(phen)₂ has been investigated by trichromatic colorimetry. The color parameters of these solutions have been calculated on the basis of the absorption spectra and are described in the CIE and CIELAB color spaces. It has been shown that one of the parameters (the so-called hue angle) could be related to some acidity parameters of solvents. Thus, it is possible to calculate the hue angle and, therefore, to predict the color of solution if the solvent acceptor number is known, or vice versa.

---

Untersuchung zur Solvatochromie von Fe(CN)₂(phen)₂

Zusammenfassung Der Einfluß organischer Lösungsmittel auf die UV-Spektren von Fe(CN)₂-(phen)₂ wurde mittels trichromatischer Kolorimetrie untersucht. Die Farbparameter der Lösungen wurden aus den Absorptionsspektren berechnet und werden in den CIE- und CIELAB-Farbräumen beschrieben. Es konnte gezeigt werden, daß einer der Farbparameter (der sogenannte Farbtonwinkel) zu den Aciditätsparametern des jeweiligen Lösungsmittels in Beziehung gesetzt werden kann. Es ist daher z.B. möglich, die Farbe der Lösung vorherzusagen, wenn die Akzeptorzahl des Lösungsmittels bekannt ist und umgekehrt.

     

Development and Validation Method for Silica Determination by Spectrophotometry in Some Herbs and Pharmaceutical Formulations

ABSTRACT

A spectrophotometric method for determination of silica in herbs and herbal pharmaceutical products has been developed and validated. The method showed excellent accuracy and precision with S.D. 1.67 and RSD 1.72%, 2.75%, respectively. The established linearity range was 0.05–0.5 μg/mL(r² > 0.99974). The recovery of silica from spiked placebo was > 95% over the linear range. The method has been successfully used in the analysis of silica in raw material and herbal pharmaceutical formulations. This validated method proved to be rapid and less costly.     

Colorimetric and Spectrofluorimetric Methods for the Determination of Melatonin in Tablets and Serum

Abstract

Two sensitive and accurate colorimetric and spectrofluonmetric methods, are presented for the determination of melatonin in tablets and serum. The first method utilizes the reactions of p-dimethylaminobenzaldehyde in hydrochloric acid (van Urk reagent)-ferric chloride in sulphuric acid (Salkowski reagent) mixture. The blue color of the resulting reaction product is measured at 630 nm. The second method is based on the reaction of melatonin with o-phthalaldehyde in acid medium which yields highly fluorescent condensation product that is measured at 465 nm as emission wavelength, using excitation wavelength at 355 nm. No interference was observed from tableting additives, and the applicability of the methods was examined by analysing tablets containing melatonin (single and combined with pyridoxine). Mean percentage recoveries from tablets were found to be 99.9+0.31 for single and 100.5+0.15 for combined tablets using colorimetric method, while by applying spectrofluorimetric method the recoveries were found to be 100.610.41 for single and 100.2+0.39 for combined tablets. Furthermore, the proposed methods were extended to the in-vitro determination of melatonin in serum. The detection limits are 0.27 ug ml^?1 for colorimetric method and 0.00035 ug ml^?1 for spectrofluorimetric method.     

Recent advances in the development of colorimetric analysis and testing based on aggregation-induced nanozymes

Colorimetric sensing strategies as a powerful point-of-care testing(POCT) tool have attracted significant interest in various chem/biosensing applications.Taking the excellent bare-eye-detectable signaling feature,nanozymes-based colorimetric sensors enable more potential applications and have been a new forefront in the colorimetric POCT analysis toward different target analytes.However,the low catalytic activity of nanozymes in most cases limits their practical application.Recent efforts demonstrate that the aggregation-induced nanozymes provide a general means to modulate nanozymes activity and enhance colorimetric sensing performances of some nanozymes-based colorimetric sensors.But there are few reports are explored to discuss and review such aggregation-induced nanozymes and their colorimetric sensing applications.To highlight the advances and progress in aggregation-induced nanozymes based colorimetric assays,we herein summary the fundamentals,classify and applications of this newlydeveloping field,focusing on the aggregation-induced activity enhancement of nanozymes(AIAEnanozymes) with a significant "signal-on" feature and aggregation-induced activity inhibition of nanozymes(AIAI-nanozymes) with a dramatical "signal-of" characteristics.Finally,we also propose the current challenges and the future prospects on both AIAE-nanozymes and AIAI-nanozymes.     

汽车太阳膜的色度与光谱特性分析

通过用带计算机控制的WGS-9型色度测量系统、UV-Vis 8500型双光束紫外-可见分光光度计和WGD-4A型光栅光谱仪定量测量和分析了某品牌汽车太阳膜的色度和光谱特性。测量分析结果表明：低红外透过率和紫外透过率与高可见光透过率是一对矛盾体,在选择太阳膜时只能有所侧重。如要求较高可见光透过的同时要避免过多紫外线照射,那应选择主波长为587.3 nm(浅蓝)或522.1 nm(钻石绿)的太阳膜。如要求较高可见光透过同时要兼顾隔热节能的功能,那么应选用色度主波长为497.3 nm(宝石蓝)或507 nm(翡翠绿)的太阳膜。     

测定粮食、水果、蔬菜稀土总量的

以一定比例的镧、铈、镨、钕、钐的氧化物配制的混合标准溶液在酸性条件下与二溴羧基偶氮胂反应,632nm处的吸光光度在0－1．5mg/L范围内符合比耳珲律,检出限为1．5μg/L,相关系数为0．9995。方法不需加掩蔽剂。试样实测结果的相对标准偏差＜7％（n＝5）,加标回收率在84％－108％之间。     

Colorimetric determination of Cu2+ in simulated wastewater using naphthalimide-based Schiff base

A new Cu²⁺-selective colorimetric sensor was developed by combining the chromophore 3-hydroxynaphthalimide with diaminomaleonitrile. The sensor showed Cu²⁺-selective colorimetric signaling behavior in dimethylsulfoxide, indicated by a solution color change from yellow to pink, which was readily discernible without any external devices. Practical application of the sensor to the detection of Cu²⁺ in an aqueous solution containing other environmentally relevant metal ions by selective two-phase liquid-liquid extraction with ethyl acetate was possible. Particularly, extractive signaling of Cu²⁺ in simulated semiconductor wastewater with a readily-usable smartphone as a colorimetric data capture and analysis tool was successfully conducted.     

Structure-property and composition-property relationships for poly(ethylene terephthalate) surfaces modified by helium plasma-based ion implantation

The surfaces of untreated and helium plasma-based ion implantation (He PBII) treated poly(ethylene terephthalate) (PET) samples were characterised by reflectance colorimetry, contact angle studies and measurements of surface electrical resistance. The results were related to the structural and compositional data obtained by the authors earlier on parallel samples by XPS and Raman spectroscopy. Inverse correlations between lightness and I_D/I_G ratio and between chroma and I_D/I_G ratio were obtained, suggesting that the PBII-treated PET samples darken and their colourfulness decreases with the increase of the portion of aromatic sp² carbon rings in the chemical structure of the modified layer. Direct correlation between water contact angle and the I_D/I_G ratio and inverse correlations between surface energy and I_D/I_G ratio and between dispersive component of surface energy and I_D/I_G ratio were found, reflecting that surface wettability, surface energy and its dispersive component decrease with the formation of surface structure, characterised again by enhanced portion of aromatic sp² carbon rings. The surface electrical resistance decreased with the increase of the surface C-content determined by XPS and also with the increase of the surface concentration of conjugated double bonds, reflected by the increase of the π → π* shake-up satellite of the C 1s peak.