K-Dependence and temperature dependence of N2-, H2-, and He-broadening coefficients for the J = 12-11 transition of acetonitrile CH3CN located near 220.7 GHz

Extensive experiments on the K = 3 component of the J = 12-11 rotational transition of acetonitrile CH₃C¹⁴N, located near 220.7 GHz, were performed at different temperatures in the range 235-350 K. They allow determining the N₂-, H₂-, and He-broadening coefficients, as well as their temperature dependences. More specific measurements on all the K-components of the involved transition perturbed by N₂ at 303 K allow to point out a clear decreasing of the broadening coefficient with increasing K. Narrowing effects are clearly observed, and experimental lines were analysed both with Voigt and speed dependent Voigt profiles; but no exhaustive lineshape study was carried out. All the experimental parameters are compared with results derived from a semiclassical calculation of collisional interactions, including electrostatic, induction, and dispersion energy contributions.     

Fe/Zn双金属氰化物催化剂催化环氧丙烷聚合的活性结构研究

以氯化锌、铁氰化钾（含有整合剂）的水溶液为原料，合成了铁锌双金属氰化物（DMC）催化剂。为获得高活性的DMC催化剂，需将叔丁醇 、多元醇螯合剂螯合至其结构中，用XRD、XPS等分析手段，对铁锌DMC催化剂的结构与活性进行分析表征。实验发现，DMC催化剂的晶体结构与螯合剂密切相关，螯合剂能显著降低DMC催化剂的结晶程度，从而提高DMC催化剂的活性。同时，氯化锌过量也有利于DMC催化剂活性的提高。并表征了相关DMC催化剂的活性中心。     

A short synthesis of 4-amino-3-hydroxybutyric acid (GABOB) via allyl cyanide

4-Amino-3-hydroxybutyric acid was synthesized from allyl cyanide in four steps in an overall yield of 38%. Ultrasonically promoted epoxidation of allyl cyanide with m-chloroperoxybenzoic acid giving oxiranylacetonitrile was used as a key step.     

Microwave-accelerated derivatization processes for the determination of phenolic acids by gas chromatography-mass spectrometry

A rapid method for the derivatization of phenolic antioxidants using microwave irradiation has been developed. Six antioxidatively active phenolic components of wines and fruits, namely gallic acid, gentisic acid, vanillic acid, caffeic acid, ferulic acid and p-coumaric acid were used in the model study. The solution of phenolic acids was evaporated to dryness on a rotary evaporator followed by further drying under microwave irradiation (600 W, 30 s). The resultant residue was dissolved in pyridene and treated with bis(trimethylsilyl)acetamide while irradiated by microwave using high power for 30 s. Controlled reaction was carried out employing bis(trimethylsilyl)trifluoroacetamide under conventional heating for 30 min. The trimethylsilyl derivatives were identified and quantified on a gas chromatography/mass selective detector. The mass spectral fragmentation patterns of the derivatives obtained by microwave irradiation were identical to those prepared by heating. The yields of microwave-assisted silylation were comparable to those from conventional heating. The rsd were less than 8% for six replicates. The linearity in wine matrix was nearly perfect. This method is a useful protocol to examine the phenolic constituents in wines and agricultural products.     

Indirect spectrophotometric determination of cyanide

A spectrophotometric method for cyanide based on its inhibition of the colour formation reaction between nickel(II) and 3-(4,5-dimethyl-2-thiazolylazo)-2,6-dihydroxybenzoic acid has been developed, and allows the determination of down to 0.1 g of cyanide. Most of the interferences can be avoided by displacement of the hydrogen cyanide using an arsine generator.     

A chemoselective deprotection of trimethylsilyl acetylenes catalyzed by silver salts

Trimethylsilyl acetylenes can be selectively deprotected in the presence of a catalytic amount of silver salts. AgNO₃ and AgOTf proved to be the most effective catalyst in a mixture of methanol, water and dichloromethane. Other functional groups, and especially silyl ethers, are not affected in these conditions.     

Efficient, highly regioselective, and stereospecific conversion of glycidol systems into C2-O-acylated vicinal halohydrins

Glycidyl esters and ethers undergo a regioselective and stereospecific opening of the oxirane ring upon treatment in chloroform in the presence of pyridine with trimethylsilyl halide (TMSX, X = Cl, Br, or I) and a mixture of carboxylic acid (CA)-trifluoroacetic anhydride (TFAA), to produce the corresponding C2-O-acylated vicinal halohydrins in high yields.     

Novel Cyanide-Bridged Three-Dimensional Coordination Polymer Derived from an Octahedral Rhenium Cluster [Re6Te8(CN)6]4?: Synthesis and Crystal Structure of [{Mn(H2O)2(DMF)} 2Re6Te8(CN)6]·2H2O

The reaction of a water solution of K₄Re₆Te₈(CN)₆ with a solution of Mn(NO₃)₂ in 0.02M hydrochloric acid in the presence of DMF gave crystals of a cluster rhenium complex [{ Mn(H₂O)₂(DMF)}₂Re₆Te₈(CN)₆]·2H₂O. The structure of the compound was determined by single crystal X-ray diffraction (a = 12.6679(9) Å, b = 17.4524(12) Å, c = 9.7882(6) Å, β = 105.570(6)°, V = 2084.6(3) ų, Z = 2, space group P2₁/n, R = 0. 0389). In the complex, the [Re₆Te₈(CN)₆]⁴⁻ cluster anions are linked to Mn²⁺ cations by the cyanide bridges, the manganese cations being additionally coordinated by the DMF molecule and two water molecules. The neighboring clusters are joined by Re-C-N-Mn bridges into a three-dimensional framework possessing cavities filled with doubly disordered water molecules.Original Russian Text Copyright © 2004 by Yu. V. Mironov, S. F. Solodovnikov, V. E. Fedorov, and Yu. V. Gatilov__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 918–922, September–October, 2004.     

双金属氰化物络合物催化环氧烷烃开环聚合的特征

合成了Co Zn双金属氰化物 (DMC)络合物催化剂 ,以X 射线衍射、元素分析、红外光谱等手段进行了表征 ,考察了该催化体系下环氧丙烷开环聚合的反应特性 ,并初步探讨了聚合反应的机理 .研究发现 ,Co Zn双金属氰化物催化剂具有很高的催化活性 ,适合于中高分子量聚醚的合成 ,但是碱性起始剂起阻聚作用 ;在该催化体系下聚合物分子量可控 ,不饱和度很低 (<0 .0 14meq g) ,分批加料聚合所得到的聚合物分子量分布较窄 (Mn Mw <1.4 ) ,而一步加料聚合所得到的聚合物分子量分布变宽 ;1 3C NMR分析表明聚合物主链具有无规立构分布的特点 ,且链节分布几乎都为头 尾方式 .聚合过程中活性链与非活性链之间可能存在一个交换反应 ;虽然聚合反应有终止 ,但与聚合物链长没有关系 ,聚合物链的终止是可逆的 .     

Spectrophotometric analysis of the sulphide-thiocyanate and cyanide-thiocyanate mixtures using the copper(II)-DPGH complex

Mixtures of sulphide-thiocyanate and cyanide-thiocyanate can be analyzed without separation using the Cu(II)-DPGH complex.Sulfide and cyanide cause a decrease in absorption that is a linear function of their concentration in the range 0.06–2 and 0.18–6 ppm, respectively. The Cu(II)-DPGH complex is extractable into chloroform in presence of thiocyanate and this is used for the Spectrophotometric determination of thiocyanate in the range 0.09–3 ppm.