Second row transition metal mixed hydride-halide triatomic molecules

Summary The ground state structures and bond energies have been obtained for the triatomic MHX systems where M is the entire sequence of second row transition metal atoms and X is a halide. The most interesting results of this study appear when these systems are compared to the triatomic MH₂ and MX₂ systems. It turns out that the structure of the MHX systems are quite similar to the corresponding MH₂ systems in general. Most of the MHX systems to the right thus have bent low-spin ground states, indicating large covalent contributions to the bonding. RuHX is a special case and has a high-spin linear ground state. For the systems to the left ionicity dominates the bonding. An important result, with implications for halide ligand effects on carbonyl and olefin insertion into M-H and M-R bonds, is that the M-H bonds for the systems to the right have a different character and are significantly weaker for the MHX than for the MH₂ systems. A similar effect is noted when the M-Cl bond strengths of MCl₂ are compared to the ones in MHCl. Both these effects can be explained by a more cationic metal with mores ⁰-state character when halide ligands are present.     

Reversible Switching CuII/CuI Single Sites Catalyze High-rate and Selective CO2 Photoreduction

Herein, we first design a model of reversible redox-switching metal–organic framework single-unit-cell sheets, where the abundant metal single sites benefit for highly selective CO₂ reduction, while the reversible redox-switching metal sites can effectively activate CO₂ molecules. Taking the synthetic Cu-MOF single-unit-cell sheets as an example, synchrotron-radiation quasi in situ X-ray photoelectron spectra unravel the reversible switching Cu^II/Cu^I single sites initially accept photoexcited electrons and then donate them to CO₂ molecules, which favors the rate-liming activation into CO₂^δ−, verified by in situ FTIR spectra and Gibbs free energy calculations. As an outcome, Cu-MOF single-unit-cell sheets achieve near 100 % selectivity for CO₂ photoreduction to CO with a high rate of 860 μmol g⁻¹ h⁻¹ without any sacrifice reagent or photosensitizer, where both the activity and selectivity outperform previously reported photocatalysts evaluated under similar conditions.     

Understanding Synergistic Catalysis on Cu-Se Dual Atom Sites via Operando X-ray Absorption Spectroscopy in Oxygen Reduction Reaction

The construction and understanding of synergy in well-defined dual-atom active sites is an available avenue to promote multistep tandem catalytic reactions. Herein, we construct a dual-hetero-atom catalyst that comprises adjacent Cu-N₄ and Se-C₃ active sites for efficient oxygen reduction reaction (ORR) activity. Operando X-ray absorption spectroscopy coupled with theoretical calculations provide in-depth insights into this dual-atom synergy mechanism for ORR under realistic device operation conditions. The heteroatom Se modulator can efficiently polarize the charge distribution around symmetrical Cu-N₄ moieties, and serve as synergistic site to facilitate the second oxygen reduction step simultaneously, in which the key OOH*-(Cu₁-N₄) transforms to O*-(Se₁-C₂) intermediate on the dual-atom sites. Therefore, this designed catalyst achieves satisfied alkaline ORR activity with a half-wave potential of 0.905 V vs. RHE and a maximum power density of 206.5 mW cm⁻² in Zn-air battery.     

Scalable Green Synthesis of Robust Ultra-Microporous Hofmann Clathrate Material with Record C3H6 Storage Density for Efficient C3H6/C3H8 Separation

Developing porous materials for C₃H₆/C₃H₈ separation faces the challenge of merging excellent separation performance with high stability and easy scalability of synthesis. Herein, we report a robust Hofmann clathrate material (ZJU-75a), featuring high-density strong binding sites to achieve all the above requirements. ZJU-75a adsorbs large amount of C₃H₆ with a record high storage density of 0.818 g mL⁻¹, and concurrently shows high C₃H₆/C₃H₈ selectivity (54.2) at 296 K and 1 bar. Single-crystal structure analysis unveil that the high-density binding sites in ZJU-75a not only provide much stronger interactions with C₃H₆ but also enable the dense packing of C₃H₆. Breakthrough experiments on gas mixtures afford both high separation factor of 14.7 and large C₃H₆ uptake (2.79 mmol g⁻¹). This material is highly stable and can be easily produced at kilogram-scale using a green synthesis method, making it as a benchmark material to address major challenges for industrial C₃H₆/C₃H₈ separation.     

Selective CO2-to-C2H4 Photoconversion Enabled by Oxygen-Mediated Triatomic Sites in Partially Oxidized Bimetallic Sulfide

Selective CO₂ photoreduction into C₂ fuels under mild conditions suffers from low product yield and poor selectivity owing to the kinetic challenge of C−C coupling. Here, triatomic sites are introduced into bimetallic sulfide to promote C−C coupling for selectively forming C₂ products. As an example, FeCoS₂ atomic layers with different oxidation degrees are first synthesized, demonstrated by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Both experiment and theoretical calculation verify more charges aggregate around the introduced oxygen atom, which enables the original Co−Fe dual sites to turn into Co−O−Fe triatomic sites, thus promoting C−C coupling of double *COOH intermediates. Accordingly, the mildly oxidized FeCoS₂ atomic layers exhibit C₂H₄ formation rate of 20.1 μmol g⁻¹ h⁻¹, with the product selectivity and electron selectivity of 82.9 % and 96.7 %, outperforming most previously reported photocatalysts under similar conditions.     

Palladium and Ruthenium Dual-Single-Atom Sites on Porous Ionic Polymers for Acetylene Dialkoxycarbonylation: Synergetic Effects Stabilize the Active Site and Increase CO Adsorption

Heterogeneous single-metal-site catalysts usually suffer from poor stability, thereby limiting industrial applications. Dual Pd₁−Ru₁ single-atom-sites supported on porous ionic polymers (Pd₁−Ru₁/PIPs) were constructed using a wetness impregnation method. The two isolated metal species in the form of a binuclear complex were immobilized on the cationic framework of PIPs through ionic bonds. Compared to the single Pd- or Ru-site catalyst, the dual single-atom system exhibits higher activity with 98 % acetylene conversion and near 100 % selectivity to dialkoxycarbonylation products, as well as better cycling stability for ten cycles without obvious decay. Based on DFT calculations, it was found that the single-Ru site exhibited a strong CO adsorption energy of −1.6 eV, leading to an increase in the local CO concentration of the catalyst. Notably, the Pd₁−Ru₁/PIPs catalyst had a much lower energy barrier of 2.49 eV compared to 3.87 eV of Pd₁/PIPs for the rate-determining step. The synergetic effect between neighboring single sites Pd₁ and Ru₁ not only enhanced the overall activity, but also stabilized Pd^II active sites. The discovery of synergetic effects between single sites can deepen our understanding of single-site catalysts at the molecular level.     

Cooperative Ni(Co)-Ru-P Sites Activate Dehydrogenation for Hydrazine Oxidation Assisting Self-powered H2 Production

Water electrolysis for H₂ production is restricted by the sluggish oxygen evolution reaction (OER). Using the thermodynamically more favorable hydrazine oxidation reaction (HzOR) to replace OER has attracted ever-growing attention. Herein, we report a twisted NiCoP nanowire array immobilized with Ru single atoms (Ru₁−NiCoP) as superior bifunctional electrocatalyst toward both HzOR and hydrogen evolution reaction (HER), realizing an ultralow working potential of −60 mV and overpotential of 32 mV for a current density of 10 mA cm⁻², respectively. Inspiringly, two-electrode electrolyzer based on overall hydrazine splitting (OHzS) demonstrates outstanding activity with a record-high current density of 522 mA cm⁻² at cell voltage of 0.3 V. DFT calculations elucidate the cooperative Ni(Co)−Ru−P sites in Ru₁−NiCoP optimize H* adsorption, and enhance adsorption of *N₂H₂ to significantly lower the energy barrier for hydrazine dehydrogenation. Moreover, a self-powered H₂ production system utilizing OHzS device driven by direct hydrazine fuel cell (DHzFC) achieve a satisfactory rate of 24.0 mol h⁻¹ m⁻².     

Time-Resolved Mn2+−NO and NO−NO Distance Measurements Reveal That Catalytic Asymmetry Regulates Alternating Access in an ABC Transporter**

ATP-binding cassette (ABC) transporters shuttle diverse substrates across biological membranes. Transport is often achieved through a transition between an inward-facing (IF) and an outward-facing (OF) conformation of the transmembrane domains (TMDs). Asymmetric nucleotide-binding sites (NBSs) are present among several ABC subfamilies and their functional role remains elusive. Here we addressed this question using concomitant NO−NO, Mn²⁺−NO, and Mn²⁺−Mn²⁺ pulsed electron–electron double-resonance spectroscopy of TmrAB in a time-resolved manner. This type-IV ABC transporter undergoes a reversible transition in the presence of ATP with a significantly faster forward transition. The impaired degenerate NBS stably binds Mn²⁺−ATP, and Mn²⁺ is preferentially released at the active consensus NBS. ATP hydrolysis at the consensus NBS considerably accelerates the reverse transition. Both NBSs fully open during each conformational cycle and the degenerate NBS may regulate the kinetics of this process.     

Co−Co Dinuclear Active Sites Dispersed on Zirconium-doped Heterostructured Co9S8/Co3O4 for High-current-density and Durable Acidic Oxygen Evolution

Developing cost-effective and sustainable acidic water oxidation catalysts requires significant advances in material design and in-depth mechanism understanding for proton exchange membrane water electrolysis. Herein, we developed a single atom regulatory strategy to construct Co−Co dinuclear active sites (DASs) catalysts that atomically dispersed zirconium doped Co₉S₈/Co₃O₄ heterostructure. The X-ray absorption fine structure elucidated the incorporation of Zr greatly facilitated the generation of Co−Co DASs layer with stretching of cobalt oxygen bond and S−Co−O heterogeneous grain boundaries interfaces, engineering attractive activity of significantly reduced overpotential of 75 mV at 10 mA cm⁻², a breakthrough of 500 mA cm⁻² high current density, and water splitting stability of 500 hours in acid, making it one of the best-performing acid-stable OER non-noble metal materials. The optimized catalyst with interatomic Co−Co distance (ca. 2.80 Å) followed oxo-oxo coupling mechanism that involved obvious oxygen bridges on dinuclear Co sites (1,090 cm⁻¹), confirmed by in situ SR-FTIR, XAFS and theoretical simulations. Furthermore, a major breakthrough of 120,000 mA g⁻¹ high mass current density using the first reported noble metal-free cobalt anode catalyst of Co−Co DASs/ZCC in PEM-WE at 2.14 V was recorded.     

三原子分子振转激发态的理论研究

三原子分子振转激发态的理论研究谢代前,鄢国森,田安民（四川大学化学系,成都,６１００６４）关键词振转激发态,三原子分子,变分法能级较高的振转激发态通常包含大振幅运动,其波函数分布于很广的势能面区域内,传统的正则模理论已不适合于解决这类问题．近年来,Ｈ...